Slaughterhouses produce a large amount of wastewater, therefore, with respect to the increasing water scarcity, slaughterhouse wastewater (SWW) recycling seems to be a desirable goal. The emerging challenges and opportunities for recycling and reuse have been examined here. The selection of a suitable process for SWW recycling is dependent on the characteristics of the wastewater, the available technology, and the legal requirements. SWW recycling is not operated at a large scale up to date, due to local legal sanitary requirements as well as challenges in technical implementation. Since SWW recycling with single-stage technologies is unlikely, combined processes are examined and evaluated within the scope of this publication. The process combination of dissolved air flotation (DAF) followed by membrane bioreactor (MBR) and, finally, reverse osmosis (RO) as a polishing step seems to be particularly promising. In this way, wastewater treatment for process water reuse could be achieved in theory, as well as in comparable laboratory experiments. Furthermore, it was calculated via the methane production potential that the entire energy demand of wastewater treatment could be covered if the organic fraction of the wastewater was used for biogas production.
Membrane distillation (MD) is an up and coming technology for concentration and separation on the verge of reaching commercialization. One of the remaining boundaries is the lack of available full-scale MD modules and systems suitable to meet the requirements of potential industrial applications. In this work a new type of feed gap air gap MD (FGAGMD) plate and frame module is introduced, designed and characterized with tap water and NaCl–H2O solution. The main feature of the new channel configuration is the separation of the heating and cooling channel from the feed channel, enabling a very high recovery ratio in a single pass. Key performance indicators (KPIs) such as flux, gained output ratio (GOR), recovery ratio and thermal efficiency are used to analyze the performance of the novel module concept within this work. A recovery rate of 93% was reached with tap water and between 32–53% with salt solutions ranging between 117 and 214 g NaCl/kg solution with this particular prototype module. Other than recovery ratio, the KPIs of the FGAGMD are similar to those of an air gap membrane distillation (AGMD) channel configuration. From the experimental results, furthermore, a new MD KPI was defined as the ratio of heating and cooling flow to feed flow. This RF ratio can be used for optimization of the module design and efficiency.
31 August 2020 in Journal of Water Reuse and Desalination
Stricter environmental regulation policies and freshwater as an increasingly valuable resource have led to global growth of zero liquid discharge (ZLD) processes in recent years. During this development, in addition to water, the recovery of recyclable materials, e.g. salts, from industrial wastewater and brines is considered more frequently. Within the framework of the HighCon research project, the subject of this study, a new ZLD process with the goal of pure single-salt recovery from industrial wastewater has been developed and investigated in a demonstrational setup at an industrial site. With regard to pure salts recovery, separating organic components is of great importance during the treatment of the concentrate arising from used water recycling. The removal of COD and of ions responsible for scaling worked very well using nanofiltration. The nanofiltration permeate containing the monovalent ions was pre-concentrated using electrodialysis and membrane distillation before selective crystallization for single-salt recovery was performed. An example economic case study for the newly developed ZLD process – based on demonstration results and considering optimization measures for a full-scale design – indicates that the costs are equal to those of a conventional ZLD process, which, however, does not provide inter alia the aforementioned benefit of single-salt recovery.
21 March 2017 in Euro-Mediterranean Journal for Environmental Integration
Anaerobic digestion for biomethane production is an important tool regarding sustainable energy production. The objective of this study was to investigate the effects of the substrate composition and operating parameters on biomethane production during anaerobic digestion, focusing on the use of flotates and slaughterhouse waste as substrates with a high organic content. A novelty here was the use of a moving bed biofilm reactor (MBBR) with circulation pump for the anaerobic treatment of flotates, slaughter waste (SW), and their mixture. Flotates and waste from slaughterhouses offer a substrate with a high organic content. In this work, it was shown that both substrates provide a high biochemical methane potential (BMP). The highest methane yield was achieved by mixing both substrates. In continuous operation, special challenges arose, due to the high nitrogen and fat content of the substrates. These could be overcome by mixing the substrates and using a circulation pump in the reactor for improved back-mixing. As a result, the highest average methane yield of 0.65 NLCH4·gTS eli−1 was achieved in mesophilic operation at an organic loading rate (OLR) of 4.2 gTS·L−1·d−1.