Porosity is frequently specified as only a value to describe the microstructure of a battery electrode. However, porosity is a key parameter for the battery electrode performance and mechanical properties such as adhesion and structural electrode integrity during charge/discharge cycling. This study illustrates the importance of using more than one method to describe the electrode microstructure of LiNi0.6Mn0.2Co0.2O2 (NMC622)-based positive electrodes. A correlative approach, from simple thickness measurements to tomography and segmentation, allowed deciphering the true porous electrode structure and to comprehend the advantages and inaccuracies of each of the analytical techniques. Herein, positive electrodes were calendered from a porosity of 44–18% to cover a wide range of electrode microstructures in state-of-the-art lithium-ion batteries. Especially highly densified electrodes cannot simply be described by a close packing of active and inactive material components, since a considerable amount of active material particles crack due to the intense calendering process. Therefore, a digital 3D model was created based on tomography data and simulation of the inactive material, which allowed the investigation of the complete pore network. For lithium-ion batteries, the results of the mercury intrusion experiments in combination with gas physisorption/pycnometry experiments provide comprehensive insight into the microstructure of positive electrodes.
1 April 2023 in Journal of the Electrochemical Society
Safety properties of lithium metal batteries (LMBs) are key for potential commercialization. The few studies reported focus predominantly on pristine materials or as-assembled cells disregarding potential safety risks induced by cyclic aging and the associated formation of high surface area lithium deposits. Herein, LMBs using organic carbonate-solvent electrolyte were investigated to decipher the influence of the lithium metal deposition behavior on the thermal stability. For this purpose, cells were cycled to different states of health, states of charge and at varied current densities during charging before analyzing the thermal stability on material and cell level via differential scanning calorimetry. In combination with cryogenic-focused ion beam-scanning electron microscopy it is possible to correlate the lithium metal deposition morphology with the thermal stability. Therein, accumulation of highly porous lithium metal deposits during cycling leads to a significant increase of released heat caused by highly exothermic reactions between deposited lithium and the electrolyte. Consequently, a denser deposition morphology shifts the onset for exothermic decomposition reactions to higher temperatures. Overall, this study introduces the combination of different analytical techniques to evaluate LMB safety properties and reveals the safety-relevant impact of cyclic aging on thermal stability.
4 January 2020 in Journal of the Electrochemical Society
Li/Mn-rich positive electrode materials are widely known for their high energy content, which exceeds that of current cathodes significantly. Their implementation in practical high-energy lithium ion batteries has to date been hindered by various technical challenges, most of all, their insufficient long-term charge/discharge cycling performance. Here, a new concept for designing core–shell (CS) materials for this class is introduced, which is based on cathode particles, which are specifically designed to have an anionic redox-rich core and a shell with reduced anionic redox. This material design approach aims to overcome the drawback of having the sensitive anionic redox at the electrolyte/active material interface, and, therefore, extenuating the phase degradation from layered- to spinel- or even rock salt-structure. In this work, the effect of a CS particle design with a Co-free, Mn-rich core and a Co-containing shell with lower Mn content is studied. The spherical cathode particles, produced by a Couette Taylor Flow Reactor, enable a superior electrochemical performance with excellent initial Coulombic efficiencies of 90%–95% and improved long-term cycling performances compared to the reference materials, consisting of the pure core or pure shell composition.