Yingying Sun

Dr. Yingying Sun


Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 December 2023 in Energies
Verified
Journal Article
Open access
PDF file
XQXiang Qi
Xiang Qi
Tiyao ZHOUTiyao ZHOU
Tiyao ZHOU
Weifeng LyuWeifeng Lyu
Weifeng Lyu
DHDongbo He
Dongbo He
YSYingying Sun
Yingying Sun
ZLZheng Li
Zheng Li
CO2 flooding is a pivotal technique for significantly enhancing oil recovery in low-permeability reservoirs. The movement and sweeping rules at the front of CO2 flooding play a critical role in oil recovery; yet, a comprehensive quantitative analysis remains an area in need of refinement. In this study, we developed 1-D and 2-D numerical simulation models to explore the sweeping behavior of miscible, immiscible, and partly miscible CO2 flooding patterns. The front position and movement rules of the three CO2 flooding patterns were determined. A novel approach to the contour area calculation method was introduced to quantitatively characterize the sweep coefficients, and the sweeping rules are discussed regarding the geological parameters, oil viscosity, and injection–production parameters. Furthermore, the Random Forest (RF) algorithm was employed to identify the controlling factor of the sweep coefficient, as determined through the use of out-of-bag (OOB) data permutation analysis. The results showed that the miscible front was located at the point of maximum CO2 content in the oil phase. The immiscible front occurred at the point of maximum interfacial tension near the production well. Remarkably, the immiscible front moved at a faster rate compared with the miscible front. Geological parameters, including porosity, permeability, and reservoir thickness, significantly impacted the gravity segregation effect, thereby influencing the CO2 sweep coefficient. Immiscible flooding exhibited the highest degree of gravity segregation, with a maximum gravity segregation degree (GSD) reaching 78.1. The permeability ratio was a crucial factor, with a lower limit of approximately 5.0 for reservoirs suitable for CO2 flooding. Injection–production parameters also played a pivotal role in terms of the sweep coefficient. Decreased well spacing and increased gas injection rates were found to enhance sweep coefficients by suppressing gravity segregation. Additionally, higher gas injection rates could improve the miscibility degree of partly miscible flooding from 0.69 to 1.0. Oil viscosity proved to be a significant factor influencing the sweep coefficients, with high seepage resistance due to increasing oil viscosity dominating the miscible and partly miscible flooding patterns. Conversely, gravity segregation primarily governed the sweep coefficient in immiscible flooding. In terms of controlling factors, the permeability ratio emerged as a paramount influence, with a factor importance value (FI) reaching 1.04. The findings of this study can help for a better understanding of sweeping rules of CO2 flooding and providing valuable insights for optimizing oil recovery strategies in the field applications of CO2 flooding.

30 October 2023 in Energies
Verified
Journal Article
Open access
PDF file
ZJZeming Ji
Zeming Ji
CHChang He
Chang He
YSYingying Sun
Yingying Sun
XYXiaokun Yue
Xiaokun Yue
HFHongxu Fang
Hongxu Fang
Weifeng LyuWeifeng Lyu
Weifeng Lyu
The carbon capture, utilization and storage (CCUS) technique is widely applied in order to solve energy shortages and global warming, in which CO2 storage plays an important part. Herein, the CO2 storage in reservoir pores with a dead-end is investigated using a molecular dynamics simulation. The results indicate that, when a CO2 molecule flows through a reservoir pore towards its dead-end, it is readily captured inside said dead-end. When the pressure difference of the CO2 injection increases, the transport speed of the CO2 becomes faster, and the storage efficiency increases. The rate constants for the absorption of the carbon dioxide at 5 MPa, 10 MPa, and 15 MPa are 0.47 m/s, 2.1 m/s, and 3.1 m/s. With the same main channel, a narrower dead-end with less oil molecules would cause a smaller spatial potential resistance, which would lead to a faster CO2 replacement and storage process. The 3 nm main channel with a 1.5 nm dead-end model had the highest absorption rate of 5.3 m/s out of the three sets of models with different dead-ends. When the dead-end’s width was constant, the rate constants for the absorption of carbon dioxide in the 6 nm main channel with a 1.5 nm dead-end model was 1.8 m/s, which was higher than that of the 3 nm–1.5 nm model. This study investigates the mechanism of CO2 storage in reservoir pores with a dead-end at the molecular level and provides a scientific basis for the practical application of CO2 storage.

1 September 2018 in Petroleum Research
Verified
Journal Article
Open access
YSYingying Sun
Yingying Sun
SZShan-Yan Zhang
Shan-Yan Zhang
ZYZhao-Peng Yang
Zhao-Peng Yang
GSGuo-Qiang Sang
Guo-Qiang Sang
TLTong Li
Tong Li
YLYang-Cheng Li
Yang-Cheng Li

25 October 2023 in Preprints.org
Verified
Preprint
Open access
PDF file
XQXiang Qi
Xiang Qi
Tiyao ZHOUTiyao ZHOU
Tiyao ZHOU
Weifeng LyuWeifeng Lyu
Weifeng Lyu
DHDongbo He
Dongbo He
YSYingying Sun
Yingying Sun
ZLZheng Li
Zheng Li
CO2 flooding stands as a pivotal technique for significantly enhancing oil recovery in low-permeability reservoirs. The movement and sweeping rules at the front of CO2 flooding play a critical role in its oil recovery, yet a comprehensive quantitative analysis remains an area in need of refinement. In this study, we have developed 1D and 2D numerical simulation models to explore the sweeping behavior of miscible, immiscible, and partly-miscible CO2 flooding patterns. The front position and movement rules of the three CO2 flooding patterns are determined. A novel approach of the contour area calculation method is introduced to quantitatively characterize the sweep coefficients, and the sweeping rules are discussed regarding geological parameters, oil viscosity, and injection-production parameters. Furthermore, the Random Forest (RF) algorithm is employed to identify the controlling factor of the sweep coefficient, as determined by out-of-bag (OOB) data displacement analysis. The results show that the miscible front is located at the point of maximum CO2 content in the oil phase. The immiscible front occurs at the point of maximum interfacial tension near the production well. Remarkably, the immiscible front moves at a faster rate compared to the miscible front. Geological parameters, including porosity, permeability, and reservoir thickness, significantly impact the gravity segregation effect, thereby influencing the CO2 sweep coefficient. Immiscible flooding exhibits the highest degree of gravity segregation, with a maximum gravity segregation degree (GSD) reaching 78.1. The permeability ratio is a crucial factor, with a lower limit of approximately 5.0 for reservoirs suitable for CO2 flooding. Injection-production parameters also play a pivotal role in sweep coefficient. Decreased well spacing and increased gas injection rates are found to enhance sweep coefficients by suppressing gravity segregation. Additionally, higher gas injection rates can improve the miscibility degree of partly-miscible flooding from 0.69 to 1.0. Oil viscosity proves to be a significant factor influencing the sweep coefficients, with high seepage resistance due to increasing oil viscosity dominating the miscible and partly-miscible flooding patterns. Conversely, gravity segregation primarily governs the sweep coefficient in immiscible flooding. In terms of controlling factors, the permeability ratio emerges as a paramount influence, with a factor importance value (FI) reaching 1.04. these results provide a theoretical foundation for the application of CO2 flooding, enhancing the understanding of the critical factors governing its success.

22 September 2023 in Energies
Verified
Journal Article
Open access
PDF file
ZLZheng Li
Zheng Li
Tiyao ZHOUTiyao ZHOU
Tiyao ZHOU
HYHengfei Yin
Hengfei Yin
YSYingying Sun
Yingying Sun
Separate-layer CO2 flooding has increasingly been used to improve the overall development of multi-layer heterogeneous reservoirs. Due to their field technical limitations, layer combinations have to be carried out to reduce the number of layer-groups required for the separate injection of CO2. Currently there are few studies of the method of designing layer combinations. In field practice, the layer combinations are often made based on the permeability ratio of the layers to be developed, but it is not possible to accurately obtain the optimal scheme in many cases. Therefore, in this paper, a new design and optimization method based on the weighted standard deviation of permeability is proposed, which comprehensively considers the effects of multiple geological and fluid properties in different layers. The new method is applied to study the layer combination schemes in separate-layer CO2 flooding in H block, Daqingzijing Oilfield, Jilin, China. The prioritization of all of the schemes is obtained via the method, and a related numerical model is also established to perform verification and quantitative analysis. The results show that designing layer combinations using the new proposed method can achieve better development effect than using the conventional permeability ratio based method. It can achieve a more uniform interlayer CO2 displacement with an obvious improvement in the CO2 swept volume in low permeability layers and a higher overall oil recovery. According to the numerical simulation results, using the optimal layer combination scheme designed via the new proposed method, the ten-year swept volume of CO2 in the low permeability layer can be increased by 16.2%, and the ten-year overall oil recovery efficiency can be increased by 3.3%, with both measures showing a remarkable improvement. The work can provide a significant reference point for the field design of layer combinations in separate-layer CO2 flooding.

1 April 2025 in Preprints.org
Verified
Preprint
Open access
PDF file
GSGuoqiang Sang
Guoqiang Sang
SLSongqi Li
Songqi Li
HYHengfei Yin
Hengfei Yin
HCHaowei Chen
Haowei Chen
NJNinghong Jia
Ninghong Jia
DZDehao Zhang
Dehao Zhang
Enhanced Oil Recovery (EOR) techniques, particularly CO2 injection, have garnered significant attention due to their potential to improve oil extraction efficiency while concurrently sequestering CO2. The impact of carbon dioxide on the properties of the hydrocarbon-water interface is currently not well established. The influence of CO2 on the interfacial characteristics of crude oil-water systems was examined using molecular dynamics (MD) simulations. Eight distinct interface models, varying in the ratio of polar to non-polar crude oil components, were constructed. The effect of CO2 was characterized by calculating IFT, molecular conformation and orientation, and oil-water-CO2 interaction energies. This study reveals three key findings: 1) As the concentration of CO2 increases, the IFT between polar and non-polar crude oils diminishes and ultimately plateaus. 2) Non-polar crude oil molecules exhibit ordered inter facial arrangements, while polar molecules are randomly distributed. Specifically, CO2 promotes perpendicular orientation of linear non-polar molecules and parallel alignment of cyclic non-polar molecules at the interface; 3) CO2 strengthens interactions between non-polar crude oil molecules, while initially weakening and then stabilizing interactions between polar molecules. These results provide crucial insights into hydrocarbon-water-CO2 IFT behavior and offer a theoretical basis for optimizing related industrial processes.