Tiyao ZHOU

Tiyao ZHOU


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 December 2023 in Energies
Verified
Journal Article
Open access
PDF file
XQXiang Qi
Xiang Qi
Tiyao ZHOUTiyao ZHOU
Tiyao ZHOU
Weifeng LyuWeifeng Lyu
Weifeng Lyu
DHDongbo He
Dongbo He
YSYingying Sun
Yingying Sun
ZLZheng Li
Zheng Li
CO2 flooding is a pivotal technique for significantly enhancing oil recovery in low-permeability reservoirs. The movement and sweeping rules at the front of CO2 flooding play a critical role in oil recovery; yet, a comprehensive quantitative analysis remains an area in need of refinement. In this study, we developed 1-D and 2-D numerical simulation models to explore the sweeping behavior of miscible, immiscible, and partly miscible CO2 flooding patterns. The front position and movement rules of the three CO2 flooding patterns were determined. A novel approach to the contour area calculation method was introduced to quantitatively characterize the sweep coefficients, and the sweeping rules are discussed regarding the geological parameters, oil viscosity, and injection–production parameters. Furthermore, the Random Forest (RF) algorithm was employed to identify the controlling factor of the sweep coefficient, as determined through the use of out-of-bag (OOB) data permutation analysis. The results showed that the miscible front was located at the point of maximum CO2 content in the oil phase. The immiscible front occurred at the point of maximum interfacial tension near the production well. Remarkably, the immiscible front moved at a faster rate compared with the miscible front. Geological parameters, including porosity, permeability, and reservoir thickness, significantly impacted the gravity segregation effect, thereby influencing the CO2 sweep coefficient. Immiscible flooding exhibited the highest degree of gravity segregation, with a maximum gravity segregation degree (GSD) reaching 78.1. The permeability ratio was a crucial factor, with a lower limit of approximately 5.0 for reservoirs suitable for CO2 flooding. Injection–production parameters also played a pivotal role in terms of the sweep coefficient. Decreased well spacing and increased gas injection rates were found to enhance sweep coefficients by suppressing gravity segregation. Additionally, higher gas injection rates could improve the miscibility degree of partly miscible flooding from 0.69 to 1.0. Oil viscosity proved to be a significant factor influencing the sweep coefficients, with high seepage resistance due to increasing oil viscosity dominating the miscible and partly miscible flooding patterns. Conversely, gravity segregation primarily governed the sweep coefficient in immiscible flooding. In terms of controlling factors, the permeability ratio emerged as a paramount influence, with a factor importance value (FI) reaching 1.04. The findings of this study can help for a better understanding of sweeping rules of CO2 flooding and providing valuable insights for optimizing oil recovery strategies in the field applications of CO2 flooding.

18 July 2023 in Energies
Verified
Journal Article
Open access
PDF file
LYLanlan Yao
Lanlan Yao
Zhengming YangZhengming Yang
Zhengming Yang
HLHaibo Li
Haibo Li
MDMeng Du
Meng Du
Tiyao ZHOUTiyao ZHOU
Tiyao ZHOU
ZYZhang yapu
Zhang yapu
There are complex pore structures in shale reservoirs, and the nonlinear flow characteristics of shale reservoirs are complicated by stress sensitivity and boundary layer effects. In this research, a new flow mathematical model was established based on capillary model, stress sensitivity and boundary layer effect. The model was verified by the experimental results of Jilin shale oil reservoir, and the influencing factors of flow characteristics were analyzed. The results show that the new shale oil flow model has good fitting and high reliability with the experimental results. The boundary layer effect and stress sensitivity are the main factors affecting the seepage characteristics. With the increase in the pressure gradient, the influence of the boundary layer effect on the flow is gradually enhanced, and the influence of the stress sensitivity on the flow is gradually weakened. At the same time, this study developed a method for the evaluation of effective displacement distance of shale oil reservoir with CO2 injection through the limited injection-production well spacing method, and obtained the nonlinear flow curve of displacement distance with reservoir permeability under different injection and production pressure difference. This research deeply studies the flow characteristics of shale oil reservoir and provides a theoretical basis for the enhanced oil recovery of shale oil with CO2 injection.

25 October 2023 in Preprints.org
Verified
Preprint
Open access
PDF file
XQXiang Qi
Xiang Qi
Tiyao ZHOUTiyao ZHOU
Tiyao ZHOU
Weifeng LyuWeifeng Lyu
Weifeng Lyu
DHDongbo He
Dongbo He
YSYingying Sun
Yingying Sun
ZLZheng Li
Zheng Li
CO2 flooding stands as a pivotal technique for significantly enhancing oil recovery in low-permeability reservoirs. The movement and sweeping rules at the front of CO2 flooding play a critical role in its oil recovery, yet a comprehensive quantitative analysis remains an area in need of refinement. In this study, we have developed 1D and 2D numerical simulation models to explore the sweeping behavior of miscible, immiscible, and partly-miscible CO2 flooding patterns. The front position and movement rules of the three CO2 flooding patterns are determined. A novel approach of the contour area calculation method is introduced to quantitatively characterize the sweep coefficients, and the sweeping rules are discussed regarding geological parameters, oil viscosity, and injection-production parameters. Furthermore, the Random Forest (RF) algorithm is employed to identify the controlling factor of the sweep coefficient, as determined by out-of-bag (OOB) data displacement analysis. The results show that the miscible front is located at the point of maximum CO2 content in the oil phase. The immiscible front occurs at the point of maximum interfacial tension near the production well. Remarkably, the immiscible front moves at a faster rate compared to the miscible front. Geological parameters, including porosity, permeability, and reservoir thickness, significantly impact the gravity segregation effect, thereby influencing the CO2 sweep coefficient. Immiscible flooding exhibits the highest degree of gravity segregation, with a maximum gravity segregation degree (GSD) reaching 78.1. The permeability ratio is a crucial factor, with a lower limit of approximately 5.0 for reservoirs suitable for CO2 flooding. Injection-production parameters also play a pivotal role in sweep coefficient. Decreased well spacing and increased gas injection rates are found to enhance sweep coefficients by suppressing gravity segregation. Additionally, higher gas injection rates can improve the miscibility degree of partly-miscible flooding from 0.69 to 1.0. Oil viscosity proves to be a significant factor influencing the sweep coefficients, with high seepage resistance due to increasing oil viscosity dominating the miscible and partly-miscible flooding patterns. Conversely, gravity segregation primarily governs the sweep coefficient in immiscible flooding. In terms of controlling factors, the permeability ratio emerges as a paramount influence, with a factor importance value (FI) reaching 1.04. these results provide a theoretical foundation for the application of CO2 flooding, enhancing the understanding of the critical factors governing its success.

22 September 2023 in Energies
Verified
Journal Article
Open access
PDF file
ZLZheng Li
Zheng Li
Tiyao ZHOUTiyao ZHOU
Tiyao ZHOU
HYHengfei Yin
Hengfei Yin
YSYingying Sun
Yingying Sun
Separate-layer CO2 flooding has increasingly been used to improve the overall development of multi-layer heterogeneous reservoirs. Due to their field technical limitations, layer combinations have to be carried out to reduce the number of layer-groups required for the separate injection of CO2. Currently there are few studies of the method of designing layer combinations. In field practice, the layer combinations are often made based on the permeability ratio of the layers to be developed, but it is not possible to accurately obtain the optimal scheme in many cases. Therefore, in this paper, a new design and optimization method based on the weighted standard deviation of permeability is proposed, which comprehensively considers the effects of multiple geological and fluid properties in different layers. The new method is applied to study the layer combination schemes in separate-layer CO2 flooding in H block, Daqingzijing Oilfield, Jilin, China. The prioritization of all of the schemes is obtained via the method, and a related numerical model is also established to perform verification and quantitative analysis. The results show that designing layer combinations using the new proposed method can achieve better development effect than using the conventional permeability ratio based method. It can achieve a more uniform interlayer CO2 displacement with an obvious improvement in the CO2 swept volume in low permeability layers and a higher overall oil recovery. According to the numerical simulation results, using the optimal layer combination scheme designed via the new proposed method, the ten-year swept volume of CO2 in the low permeability layer can be increased by 16.2%, and the ten-year overall oil recovery efficiency can be increased by 3.3%, with both measures showing a remarkable improvement. The work can provide a significant reference point for the field design of layer combinations in separate-layer CO2 flooding.

29 August 2023 in Preprints.org
Verified
Preprint
Open access
PDF file
YSYingying Sun
Yingying Sun
MGMing Gao
Ming Gao
YQYuchen Qian
Yuchen Qian
Tiyao ZHOUTiyao ZHOU
Tiyao ZHOU
HYHengfei Yin
Hengfei Yin
QXQi Xiang
Qi Xiang
Due to its economic benefits and the ability to reduce carbon emissions on a large scale, the CCUS-EOR project has been widely promoted and implemented globally. By using carbon dioxide flooding, oil water transition zone reservoirs that were once considered worthless may have new potential for development because of its rich geological reserves and high quality carbon sequestration conditions. Unlike water flooded layer, the oil in the TZ is unsaturated rather than residual oil after water flooding, which would lead to special oil-water seepage law of initial oil saturation. It is necessary to clarify special oil-water seepage law of oil-water transition zone to evaluate its production & storage potential. In this paper, we present a series of experiments to characterize the relationship between residual oil saturation and initial oil saturation. Cores in four different permeability and oil in four different viscosity are used to simulate different reservoir conditions, and that CO2 immiscible flooding experiments for each cores permeability and oil viscosity are performed with four different initial oil saturation. A total of 36 sets of CO2 flooding experiment data are used to draw the initial oil saturation & residual oil saturation chart. The results show that the residual oil saturation depends on the initial oil saturation rather than constant under certain conditions of core and oil. Under the condition of low permeability and high oil viscosity, the influence of initial oil saturation on residual oil saturation is relatively strong. The initial oil saturation & residual oil saturation chart can accurately calculate the residual oil saturation, initial water cut and final recovery based on the core permeability, oil viscosity and the initial oil saturation which is the first time to put forward this kind of chart and of the great significance to evaluate the recovery potential of the TZ.

9 November 2026 in Energies
Verified
Journal Article
Open access
PDF file
Tiyao ZHOUTiyao ZHOU
Tiyao ZHOU
CWChunkai Wang
Chunkai Wang
HLHaibo Li
Haibo Li
SWShuaijie Wei
Shuaijie Wei
Zhengming YangZhengming Yang
Zhengming Yang
Qi LiuQi Liu
Qi Liu
Integrated CO2-enhanced oil recovery (CO2-EOR) and geological storage require simultaneous optimization of oil production and CO2 retention. This study developed a surrogate-assisted framework integrating CMG-GEM compositional simulation, machine learning, and reliability-based screening. Three regimes were evaluated: full-period WAG (0Y) and 5- or 10-year continuous CO2 pre-injection followed by WAG (5Y and 10Y). Based on 1500 simulation samples, LightGBM surrogate models were developed to predict 30-year cumulative oil production (Np) and net CO2 storage. The 5Y and 10Y regimes generally increased Np and net CO2 storage but reduced net CO2 storage efficiency, revealing a regime-level capacity–efficiency trade-off. SHapley Additive exPlanations (SHAP) analysis identified initial water saturation and injection intensity as key predictors of Np, whereas WAG fraction dominated net CO2 storage predictions. Base-scenario Group Holdout validation yielded R2 values of 0.905 and 0.977 for Np and net CO2 storage, respectively. Trusted-domain screening, uncertainty assessment, and engineering constraints, followed by Pareto analysis, reduced 30,000 candidate schemes to nine representative solutions for independent GEM verification, with mean absolute percentage errors of 1.88% and 4.87%, respectively. These findings demonstrate that surrogate-assisted screening can efficiently narrow the design space, while physics-based verification remains essential for reliable CO2-EOR and storage optimization.