Dongbo He

Dongbo He


Research Focus & Metrics

Academic Career Length

31Years (1996-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 September 2022 in Minerals
Verified
Journal Article
Open access
PDF file
QTQiang Tong
Qiang Tong
DHDongbo He
Dongbo He
ZXZhaohui Xia
Zhaohui Xia
JHJixin Huang
Jixin Huang
KDKaixiang Di
Kaixiang Di
SGSongwei Guo
Songwei Guo
The microscopic pore-throat structure of low-porosity and ultralow permeability sandstone reservoirs controls the seepage characteristics, which directly affects the water injection development efficiency of oilfields. Different from typical tight sandstone reservoirs, macropores and mesopores are more developed in the pore-throat structure of this type of reservoir, which changes the dominance of micropores over seepage capacity. Based on the full-range pore-throat structure characterization method and fractal theory, many experimental methods are used to study the influence of the microscopic pore-throat structure over the seepage characteristics in the Chang 9 reservoir in the Yanchang Formation of the Ordos Basin. The results of 12 typical samples show that the pore-throat structure has multifractal characteristics, and the occurrence degree of movable fluid and seepage capacity vary greatly, showing strong microscopic heterogeneity. Following characterization of the full-range pore-throat structure, the relative proportion of macropores and mesopores determines the physical properties of the reservoir. The pore-throat scale and structural heterogeneity have a significant impact on porosity, while the pore-throat structure connectivity has a crucial impact on permeability. Quartz provides resistance to compaction and preserves more primary pores. Additionally, the relationship between clay minerals and physical properties is not significant. Only illite and I/S mixed layers have a slight effect on permeability reduction. Furthermore, laumontite cementation is the key factor in the destruction of the pore-throat structure. Porosity has a significant effect on movable fluid occurrence and is more closely related to the two-phase seepage. Permeability controls the oil displacement efficiency in the anhydrous period, and porosity controls the oil displacement efficiency in the final period. The fractal dimension has some significant controls on the pore-throat structure, which are reflected in the fact that the higher the homogeneity of macropores is and the higher the heterogeneity of mesopores and micropores is, the better the reservoir development will be. In particular, the degree of macropore development guarantees reservoir quality. The control of the fractal dimension on the seepage capacity is complex, especially for mesopores and micropores; the higher the degree of heterogeneity is, the stronger the seepage capacity will be. The occurrence of movable fluid is significantly affected by the scale and heterogeneity of the pore-throat structure, which is reflected as stronger heterogeneity of the pore-throat structure and poorer relative seepage capacity.

19 December 2023 in Energies
Verified
Journal Article
Open access
PDF file
XQXiang Qi
Xiang Qi
Tiyao ZHOUTiyao ZHOU
Tiyao ZHOU
Weifeng LyuWeifeng Lyu
Weifeng Lyu
DHDongbo He
Dongbo He
YSYingying Sun
Yingying Sun
ZLZheng Li
Zheng Li
CO2 flooding is a pivotal technique for significantly enhancing oil recovery in low-permeability reservoirs. The movement and sweeping rules at the front of CO2 flooding play a critical role in oil recovery; yet, a comprehensive quantitative analysis remains an area in need of refinement. In this study, we developed 1-D and 2-D numerical simulation models to explore the sweeping behavior of miscible, immiscible, and partly miscible CO2 flooding patterns. The front position and movement rules of the three CO2 flooding patterns were determined. A novel approach to the contour area calculation method was introduced to quantitatively characterize the sweep coefficients, and the sweeping rules are discussed regarding the geological parameters, oil viscosity, and injection–production parameters. Furthermore, the Random Forest (RF) algorithm was employed to identify the controlling factor of the sweep coefficient, as determined through the use of out-of-bag (OOB) data permutation analysis. The results showed that the miscible front was located at the point of maximum CO2 content in the oil phase. The immiscible front occurred at the point of maximum interfacial tension near the production well. Remarkably, the immiscible front moved at a faster rate compared with the miscible front. Geological parameters, including porosity, permeability, and reservoir thickness, significantly impacted the gravity segregation effect, thereby influencing the CO2 sweep coefficient. Immiscible flooding exhibited the highest degree of gravity segregation, with a maximum gravity segregation degree (GSD) reaching 78.1. The permeability ratio was a crucial factor, with a lower limit of approximately 5.0 for reservoirs suitable for CO2 flooding. Injection–production parameters also played a pivotal role in terms of the sweep coefficient. Decreased well spacing and increased gas injection rates were found to enhance sweep coefficients by suppressing gravity segregation. Additionally, higher gas injection rates could improve the miscibility degree of partly miscible flooding from 0.69 to 1.0. Oil viscosity proved to be a significant factor influencing the sweep coefficients, with high seepage resistance due to increasing oil viscosity dominating the miscible and partly miscible flooding patterns. Conversely, gravity segregation primarily governed the sweep coefficient in immiscible flooding. In terms of controlling factors, the permeability ratio emerged as a paramount influence, with a factor importance value (FI) reaching 1.04. The findings of this study can help for a better understanding of sweeping rules of CO2 flooding and providing valuable insights for optimizing oil recovery strategies in the field applications of CO2 flooding.

18 September 2023 in Energies
Verified
Journal Article
Open access
PDF file
YZYu Zhang
Yu Zhang
Weifeng LyuWeifeng Lyu
Weifeng Lyu
KZKe Zhang
Ke Zhang
DHDongbo He
Dongbo He
ALAo Li
Ao Li
JGJiahao Gao
Jiahao Gao
Carbon dioxide flooding is a strategic replacement technology for greatly enhancing oil recovery in low-permeability oilfields, which includes social benefits resulting from carbon emission reduction and economic benefits owing to the improvement of oil recovery. Therefore, it is of great significance to develop and apply the technology of CO2 flooding and storage in the petroleum industry. In reservoir conditions, CO2 is usually under a supercritical state, presenting both low viscosity and high diffusivity of a gaseous state and high density of a liquid state. The special phase behavior of CO2 directly affects its extraction capacity, resulting in the change of miscible behavior between CO2 and crude oil. In this paper, the ultra-high-pressure–high-temperature pressure–volume–temperature (PVT) system was used to evaluate the phase characteristics of CO2 during the process of reservoir development. The phase behaviors of the CO2/CH4/N2 crude oil system were compared and analyzed. Moreover, the matching mechanism between supercritical CO2 characteristics and oil–gas system miscibility was investigated and defined. This work deepened the understanding of the phase characteristics of CO2 in the process of miscible flooding, providing both theoretical guidance for the application of CO2 injection on oilfields and the essential scientific basis for the implementation of CCUS-EOR technology.

28 April 1997 in Physical Review Letters
Verified
Journal Article
Open access
PDF file
MBM. Bishai
M. Bishai
JFJ. Fast
J. Fast
EGE. Gerndt
E. Gerndt
JHJ. W. Hinson
J. W. Hinson
NMN. Menon
N. Menon
MWM. Wood
M. Wood
Using data collected with the CLEO II detector at the Cornell Electron Storage Ring, we present new measurements of the branching fractions for D+→KSK+ and D+→KSπ+. These results are combined with other CLEO measurements to extract the ratios of isospin amplitudes and phase shifts for D→KK and D→Kπ.

1 May 1998 in Physical Review D
Verified
Journal Article
Open access
PDF file
BNB. Nemati
B. Nemati
SRS. J. Richichi
S. J. Richichi
WRW. R. Ross
W. R. Ross
PSP. Skubic
P. Skubic
MBM. Bishai
M. Bishai
MZM. M. Zoeller
M. M. Zoeller
Using 3.1fb−1 of data accumulated at the Υ(4S) by the CLEO-II detector, corresponding to 3.3×106 BB¯ pairs, we have searched for the color-suppressed B hadronic decay processes B0→D0(D*0)X0, where X0 is a light neutral meson π0, ρ0, η, η′ or ω. The D*0 mesons are reconstructed in D*0→D0π0 and the D0 mesons in D0→K−π+, K−π+π0 and K−π+π+π− decay modes. No obvious signal is observed. We set 90% C.L. upper limits on these modes, varying from 1.2×10−4 for B0→D0π0 to 1.9×10−3 for B0→D*0η′.

25 November 1996 in Physical Review Letters
Verified
Journal Article
Closed access
PDF file
TBT. Bergfeld
T. Bergfeld
BEB. I. Eisenstein
B. I. Eisenstein
JEJ. Ernst
J. Ernst
GGG. E. Gladding
G. E. Gladding
GGG. D. Gollin
G. D. Gollin
JRJ. L. Rodriguez
J. L. Rodriguez
We use data collected by the CLEO II detector at the Cornell Electron Storage Ring (CESR) to search for B+→h+h−h+ (nonresonant) decays, where h± can be either π±,K±, or p(p¯). We see no evidence for signals and set upper limits on the branching fractions in the range (2.8–8.9)×10−5. If observed, these decays may display CP violating asymmetries.