Low bearing capacity soils may pose serious construction concerns such as reduced bearing capacity and excessive hydro-associated volume changes. Proper soil remediation techniques must be planned and implemented before commencing any construction on low bearing capacity soils. Environmentally friendly soil stabilizers are gradually replacing traditional soil stabilizers with high carbon dioxide emissions such as lime and cement. This study investigated the use of an alternative pozzolanic mix of nano-additives (i.e., nano-silica and nano-alumina) and cement to reduce the usage of cement for achieving competent soil stabilization outcomes. A series of unconfined compressive strength (UCS), direct shear, and durability tests were conducted on marl specimens cured for 1, 7, and 28 days stabilized with nano-additives (0.1~1.5%), 3% cement, and combined 3% cement and nano-additives. The UCS and shear strength of stabilized marl increased with nano-additives up to a threshold nano-additive content of 1% which was further intensified with curing time. Nano-additive treated cemented marl specimens showed long durability under the water, while the cemented marl decomposed early. The microfabric inspection of stabilized marl specimens showed significant growth of calcium silicate hydrate (CSH) products within the micro fabric of nano-silica treated marl with reduced pore-spaces within aggregated particles. The results confirmed that nano-additives can replace cement partially to achieve multi-fold improvement in the strength characteristics of the marl.
3 September 2022 in Arabian Journal of Geosciences
Forest roads are crucial for economic development and resource accessibility, especially in regions with extensive wood demand driven by construction growth. These roads require consistent maintenance to prevent structural issues, even though they experience lower traffic. Traditionally, gypsum has been used for soil stabilization due to its cation exchange capability with clay minerals and flocculation properties. However, its water solubility in wet conditions necessitates innovative solutions. This study explores a novel approach by combining gypsum with rice husk ash (RHA), an abundant agricultural waste, to address the challenges posed by expansive and low-bearing clay soils in forest road construction. In this study, an expansive soil with high plasticity and swelling potential is treated with varying combinations of RHA (5–20%) and gypsum (2–6%), followed by curing for 7, 15 and 30 days. Mechanical property tests revealed reduced plasticity and swelling pressure, alongside increased unconfined compressive strength. Microscopic analysis illustrated the formation of calcium silicate hydrate (CSH) and calcium aluminosilicate hydrate (CAH) gels, which possibly contributes to improved stability. This research underscores the potential of sustainable soil stabilization using gypsum and RHA synergy to fortify forest roads against expansive clay soil challenges, promoting eco-friendly and resilient infrastructure solutions.
The Lut Block in east Iran with a widespread record of arc-type Mesozoic-Cenozoic magmatic rocks is bordered by the Birjand (Sistan) ophiolitic assemblage to the east and the Sabzevar ophiolitic assemblage to the north. The nature and tectonomagmatic setting of these sutures and associated arcs are controversial. The geochemical attributes of the Upper Cretaceous-Paleogene intrusive and extrusive rocks in the central (CLB) and the northern Lut block (NLB) and in the Sabzevar ophiolite zone (SOZ), Late Cretaceous calc-alkaline and adakitic rocks to the east of the Sistan suture (CAS), and the Bazman intrusives to the west are consistent with a subduction-related volcanic arc setting. The Najmabad granitoids in the NLB compositionally overlap with the Eocene Sabzevar calcalkaline and adakitic lava flows (ESA), implying a common magmatic source and a similar trend of evolution. The island arc basalt-like geochemical patterns and the initial Sr and Nd isotope compositions for the CLB intrusive bodies suggest that the parent magmas formed by partial melting in a suprasubduction mantle wedge. The initial 87Sr/861Sr and εNd(t) values for the CAS, the Bazman intrusives, the ESA, and the Najmabad granitoids are similar and overlap those of the Sabzevar ophiolitic rocks. Here, we review the previously proposed one-sided subduction models for the Lut block and the Sabzevar suture zone, and discuss in favour of a two-sided asymmetric subduction as an alternative geodynamic model.