Jafar Karimiazar

Mrs. Jafar Karimiazar

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 October 2021 in Minerals
Verified
Journal Article
Open access
PDF file
Mehdi MirzababaeiMehdi Mirzababaei
Mehdi Mirzababaei
JKJafar Karimiazar
Jafar Karimiazar
ETEbrahim Sharifi Teshnizi
Ebrahim Sharifi Teshnizi
RAReza Arjmandzadeh
Reza Arjmandzadeh
SBSayed Hessam Bahmani
Sayed Hessam Bahmani
Low bearing capacity soils may pose serious construction concerns such as reduced bearing capacity and excessive hydro-associated volume changes. Proper soil remediation techniques must be planned and implemented before commencing any construction on low bearing capacity soils. Environmentally friendly soil stabilizers are gradually replacing traditional soil stabilizers with high carbon dioxide emissions such as lime and cement. This study investigated the use of an alternative pozzolanic mix of nano-additives (i.e., nano-silica and nano-alumina) and cement to reduce the usage of cement for achieving competent soil stabilization outcomes. A series of unconfined compressive strength (UCS), direct shear, and durability tests were conducted on marl specimens cured for 1, 7, and 28 days stabilized with nano-additives (0.1~1.5%), 3% cement, and combined 3% cement and nano-additives. The UCS and shear strength of stabilized marl increased with nano-additives up to a threshold nano-additive content of 1% which was further intensified with curing time. Nano-additive treated cemented marl specimens showed long durability under the water, while the cemented marl decomposed early. The microfabric inspection of stabilized marl specimens showed significant growth of calcium silicate hydrate (CSH) products within the micro fabric of nano-silica treated marl with reduced pore-spaces within aggregated particles. The results confirmed that nano-additives can replace cement partially to achieve multi-fold improvement in the strength characteristics of the marl.

3 September 2022 in Arabian Journal of Geosciences
Verified
Journal Article
Closed access
PDF file
ETEbrahim Sharifi Teshnizi
Ebrahim Sharifi Teshnizi
Brendan O'KellyBrendan O'Kelly
Brendan O'Kelly
JKJafar Karimiazar
Jafar Karimiazar
SMSayfoddin Moosazadeh
Sayfoddin Moosazadeh
RAReza Arjmandzadeh
Reza Arjmandzadeh
APAparupa Pani
Aparupa Pani

8 November 2023 in Quarterly Journal of Engineering Geology and Hydrogeology
Verified
Journal Article
Closed access
ETEbrahim Sharifi Teshnizi
Ebrahim Sharifi Teshnizi
Mehdi MirzababaeiMehdi Mirzababaei
Mehdi Mirzababaei
JKJafar Karimiazar
Jafar Karimiazar
RAReza Arjmandzadeh
Reza Arjmandzadeh
KMKamran Mahmoudpardabad
Kamran Mahmoudpardabad
Forest roads are crucial for economic development and resource accessibility, especially in regions with extensive wood demand driven by construction growth. These roads require consistent maintenance to prevent structural issues, even though they experience lower traffic. Traditionally, gypsum has been used for soil stabilization due to its cation exchange capability with clay minerals and flocculation properties. However, its water solubility in wet conditions necessitates innovative solutions. This study explores a novel approach by combining gypsum with rice husk ash (RHA), an abundant agricultural waste, to address the challenges posed by expansive and low-bearing clay soils in forest road construction. In this study, an expansive soil with high plasticity and swelling potential is treated with varying combinations of RHA (5–20%) and gypsum (2–6%), followed by curing for 7, 15 and 30 days. Mechanical property tests revealed reduced plasticity and swelling pressure, alongside increased unconfined compressive strength. Microscopic analysis illustrated the formation of calcium silicate hydrate (CSH) and calcium aluminosilicate hydrate (CAH) gels, which possibly contributes to improved stability. This research underscores the potential of sustainable soil stabilization using gypsum and RHA synergy to fortify forest roads against expansive clay soil challenges, promoting eco-friendly and resilient infrastructure solutions.

30 September 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
ETEbrahim Sharifi Teshnizi
Ebrahim Sharifi Teshnizi
JKJafar Karimiazar
Jafar Karimiazar
Jair De Jesus Arrieta BaldovinoJair De Jesus Arrieta Baldovino
Jair De Jesus Arrieta Baldovino
This research examined how changing the ratios of certain substances affected the strength and durability of a specific type of building material when exposed to acid and heat. This study used various combinations of zeolite, metakaolin, slag, and Portland cement as primary materials. It also used different amounts of potassium hydroxide (KOH) to make the geopolymer mortar. The concentrations of KOH used were 8 M, 12 M, 14 M, and 16 M. The cement-based material had the highest water absorption. A total of 240 tests were conducted, including 20 samples for each mix design tested at curing times of 7, 14, 21, 28, and 90 days. The results showed that the samples made with slag base material and 8 M mixing design had the highest average compressive strength at 28 and 90 days in the acidic environment test, and the zeolite and metakaolin base material samples had the highest corrosion and weight loss, possibly due to their high specific surface and aluminosilicate origin. The samples made with slag-based material had better resistance and the highest average compressive strength in the 300 °C and 500 °C thermo-mechanical tests. The lowest average compressive strength in the thermal and mechanical stress test was related to the samples made with a metakaolin base material. The tests performed on the samples made with slag base material had better compressive strength than the three other base materials in the acid and heat tests. The zeolite-based mortar lost the most weight under 30% acidic sulfuric water. The findings suggest that changes in the molar ratios of alkaline activators can significantly affect the durability properties and strength of geopolymer mortar, and the slag-based material with an 8 M mixing design had the best performance; also, SEM analysis verified this mechanism.