Electricity plays a significant role in daily life and is the main component of countless applications. Thus, ongoing research is necessary to improve the existing approaches, or find new approaches, to enhancing power generation. The thermoelectric generator (TEG) is among the notable and widespread technologies used to produce electricity, and converts waste energy into electrical energy using the Seebeck effect. Due to the Seebeck effect, temperature change can be turned into electrical energy; hence, a TEG can be applied whenever there is a temperature difference. The present paper presents the theoretical background of the TEG, in addition to a comprehensive review of the TEG and its implementation in various fields. This paper also sheds light on the new technologies of the TEG and their related challenges. Notably, it was found that the TEG is efficient in hybrid heat recovery systems, such as the phase change material (PCM), heat pipe (HP), and proton exchange membrane (PEM), and the efficiency of the TEG has increased due to a set of improvements in the TEG’s materials. Moreover, results show that the TEG technology has been frequently applied in recent years, and all of the investigated papers agree that the TEG is a promising technology in power generation and heat recovery systems.

Energy has become the backbone of humanities daily activities. Heating, ventilating, and air conditioning systems (HVAC), which consume around 39% of energy in the residential sector, have turned into an essential constituent for providing fresh air, especially after COVD-19, not only in hospitals but also in any simple construction. Thus, decreasing this percentage or recovering part of the energy lost is an essential issue in today’s energy management scenarios. In this context, the present manuscript suggests a comprehensive review, classifications, critical analysis, and potential recommendations for energy recovery in air conditioning systems. It classifies energy recovery into two main categories: using lost energy for external uses, such as heating domestic water, or with other devices; and using lost energy for internal uses, such as the hot airflow which can be reused again for increasing efficiency of HVAC. In addition, this paper presents a summary of previous research and undertakes a review of the devices used for recovering energy. Furthermore, this review identifies superior devices in terms of climate and weather conditions. These objectives are accomplished by investigating around 190 published papers to conclude that energy recovery devices show a considerable effect on energy consumption in HVAC, mainly the heat pipe, fixed plate, and rotary wheel devices.

Fluctuant irradiance conditions constitute a challenge in front of a proper battery charging process, when originated from a PhotoVoltaic Array (PVA). The behavior of the PVA under such conditions (i.e., reflected by a disturbed PV characteristic curve) increases the complexity of the total available power’s extraction process. This inconvenient fact yields eventually to a decreased overall efficiency of PV systems, especially with the presence of imprecise power-electronics involved circuits. Accordingly, the purpose of this paper is to design a complete battery solar charger, with Maximum Power Point Tracking ability, emerged from a PVA of 1.918 kWp, arranged in Series-Parallel topology. The targeted battery is of Lithium-Ion (Li-I) type, with 24 VDC operating voltage and 150 Ah rated current. The design began by configuring an interleaved synchronous DC-DC converter to produce a desired voltage level, with low inductor ripple current and low output ripple voltage. The DC-DC converter is in turns condemned by a modified Perturb and Observe (P&O) algorithm, to ensure efficient maximum power tracking. Progressively, the design encountered a layout of the bi-directional DC-DC converter to ensure safe current charging values for the battery. Under the same manner, the role of the bi-directional converter was to plug the battery out of the system, in case when the Depth of Discharge (DoD) is below 25%, thus sustaining the life span of the battery. The entire setup of the proposed sub-systems then leads to the relatively fastest, safest, and most reliable battery charging process. Results show an effectiveness (in terms of PV power tracking) ranging from 87% to 100% under four swiftly changing irradiance conditions. Moreover, this paper suggested the design’s future industrialization process, leading to an effective PV solar charger prototype.