This paper presents a portable device for outdoor air quality measurement that provides concentration values for the main pollutants: NO₂, NO, CO, O₃, PM_2.5 and PM₁₀, and other values such as temperature, humidity, location, and date. The device is based on the use of commercial electrochemical gas and optical particle matter sensors with a careful design of the electronics for reducing the electrical noise and increasing the accuracy of the measurements. The result is a low-cost system with IoT technology that connects to the Internet through a GSM module and sends all real-time data to a cloud platform with storage and computational potential. Two identical devices were fabricated and installed on a mobile reference measurement unit and deployed in Badajoz, Spain. The results of a two-month field campaign are presented and published. Data obtained from these measurements were calibrated using linear regression and neural network techniques. Good performance has been achieved for both gaseous pollutants (with a Pearson correlation coefficient of up to 0.97) and PM sensors.

We present a device based on low-cost electrochemical and optical sensors, designed to be attached to bicycle handlebars, with the aim of monitoring the air quality in urban environments. The system has three electrochemical sensors for measuring NO₂ and O₃ and an optical particle-matter (PM) sensor for PM₂.₅ and PM₁₀ concentrations. The electronic instrumentation was home-developed for this application. To ensure a constant air flow, the input fan of the particle sensor is used as an air supply pump to the rest of the sensors. Eight identical devices were built; two were collocated in parallel with a reference urban-air-quality-monitoring station and calibrated using a neural network (R² > 0.83). Several bicycle routes were carried out throughout the city of Badajoz (Spain) to allow the device to be tested in real field conditions. An air-quality index was calculated to facilitate the user’s understanding. The results show that this index provides data on the spatiotemporal variability of pollutants between the central and peripheral areas, including changes between weekdays and weekends and between different times of the day, thus providing valuable information for citizens through a dedicated cloud-based data platform.

2,4,6-trichloroanisole (TCA) is mainly responsible for cork taint in wine, which causes significant economic losses; therefore, the wine and cork industries demand an immediate, economic, noninvasive and on-the-spot solution. In this work, we present a novel prototype of an electronic nose (e-nose) using an array of digital and analog metal-oxide gas sensors with a total of 31 signals, capable of detecting TCA, and classifying cork samples with low TCA concentrations (≤15.1 ng/L). The results show that the device responds to low concentrations of TCA in laboratory conditions. It also differentiates among the inner and outer layers of cork bark (81.5% success) and distinguishes among six different samples of granulated cork (83.3% success). Finally, the device can predict the concentration of a new sample within a ±10% error margin.

This work describes the technical features and the performance of two different types of metal-oxide semiconductor sensors, based on ZnO:Ga thin films and SnO₂-G nanofibrous layers, for tropospheric ozone monitoring in ambient air. These nanostructures were tested and compared with commercial metal-oxide semiconductor sensors under controlled laboratory conditions and in a field campaign during summer 2021 in Monfragüe National Park (western Spain). The paper also details the design of the electronic device developed for this purpose. A machine learning algorithm based on Support Vector Regression (SVR) allowed the conversion of the resistive values into ozone concentration, which was evaluated afterward. The results showed that the manufactured sensors performed similarly to the commercial sensors in terms of R² (0.94 and 0.95) and RMSE (5.21 and 4.83 μg∙m⁻³). Moreover, a novel uncertainty calculation based on European guides for air quality sensor testing was conducted, in which the manufactured sensors outperformed the commercial ones.