Wen Ge

Dr. Wen Ge


Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 December 2022 in Coatings
Verified
Journal Article
Open access
PDF file
MWMeijiao Wang
Meijiao Wang
ZXZixiao Xue
Zixiao Xue
YSYan Shaojiu
Yan Shaojiu
JHJin He
Jin He
QSQiuyue Shao
Qiuyue Shao
BLBaodi Lu
Baodi Lu
The hydrophobicity and corrosion resistance of composite coatings can be effectively improved by changing the electrodeposition method and adding inorganic nanoparticles. In this work, the incorporation of WS2 nanoparticles significantly increased the surface roughness of Ni-Co coatings. The best hydrophobicity and corrosion resistance of the Ni-Co/WS2 nanocomposite coatings (water contact angle of 144.7°) were obtained in the direct current electrodeposition mode when the current density was 3 A/dm2 and the electrodeposition time was 50 min. Compared with direct current electrodeposition, the pulsed current electrodeposition method was more conducive to improving the electrodeposition performance of the nanocomposite coatings. Under the conditions of a current density of 3 A/dm2, pulse duty cycle of 70%, and pulse frequency of 1000 Hz, the nanocomposite coatings reached a superhydrophobic state (water contact angle of 153.8°). The nanocomposite coatings had a slower corrosion rate and larger impedance modulus in this state, and thus the corrosion resistance was superior. The wetting state of the Ni-Co/WS2 nanocomposite coating surface was closer to the Cassie–Baxter model. The protective air layer formed by the layered rough microstructures significantly reduced the actual contact area between the liquid and the substrate, achieving excellent hydrophobic and corrosion resistance properties.

15 July 2022 in Coatings
Verified
Journal Article
Open access
PDF file
WGWen Ge
Wen Ge
WLWensheng Li
Wensheng Li
RLRihong Li
Rihong Li
Yifan DongYifan Dong
Yifan Dong
ZZZiming Zeng
Ziming Zeng
JHJin He
Jin He
The uniformity and microstructure of the copper deposition in the high aspect ratio plated through holes (penetrating holes) are crucial for the performance of printed circuit board. We systematically investigated the effects of reverse pulse parameters in the period pulse reverse (PPR) plating on the uniformity and microstructure of the copper deposition, including reverse pulse frequency, reverse pulse duty cycle and reverse pulse current density. The Cu deposition behavior (throwing power) and its crystallographic characteristics, including grain size, crystallographic orientation, and grain boundary, were characterized by means of field-emission scanning electron microscopy (FE-SEM), X-ray diffractometer (XRD), and electron backscatter diffraction (EBSD). Our results clarify that the reverse pulse current density and duty ratio should be low to achieve the full filling and high uniformity of the through holes. The reverse pulse frequency of 1500 Hz would prevent the through holes to be fully filled. The copper electrodeposition in PTH prepared by double pulse electrodeposition has the good (111) surface texture and grain boundary distribution. This work demonstrated that the period pulse reverse (PPR) plating provides unique advantages in achieving the ultra-uniform copper deposition in the high aspect ratio plated through holes.

31 March 2020 in Coatings
Verified
Journal Article
Open access
PDF file
WGWen Ge
Wen Ge
THTaisong He
Taisong He
MWMeijiao Wang
Meijiao Wang
JLJiamei Li
Jiamei Li
Functional gradient materials (FGM) have many excellent properties, and high-performance gradient coating exhibits good prospective application. In this paper, the nano-grain Ni/ZrO2 gradient coating was prepared by double pulse electrodeposition (BP). The surface morphology, crystal structure and electrochemical corrosion resistance of the nano-grain Ni/ZrO2 coating and Ni coating, annealed at different temperatures (400–800 °C), have been compared. In the vertical direction to the substrate surface, the content of ZrO2 increases from 0% to 34.99%. X-ray diffraction (XRD) revealed that the average crystal size of Ni/ZrO2 gradient coating gradually increases from 13.75 to 27.75 nm, and the crystal structure is a face-centered cubic (FCC). The main crystal orientation faces are (111) and (200), while the (200) face exhibited a stronger preferred orientation. Compared with the Ni coating by scanning electron microscopy, the surface morphology of double pulse fabricated Ni/ZrO2 gradient coating was revealed as being smoother, denser, and having fewer pores, and the crystal particle size distribution became narrow. X-ray photoelectron spectroscopy (XPS) shows that the chemical binding states of elements Ni and Zr have been altered. The binding energies of 2p3/2 and 2p1/2 for Ni have been increased, resulting in a higher electron donor state of Ni. The binding energy of 3d5/2 and 3d3/2 of Zr4+ in ZrO2 is decreased, thus becoming better electron acceptors. Chemical bonding has been formed at the Ni/ZrO2 interface. This study demonstrated that double pulse electrodeposition is a promising fabrication method for functional gradient coatings for high temperature applications.

9 November 2024 in Coatings
Verified
Journal Article
Open access
PDF file
TCTing Chen
Ting Chen
LYLonglin Yu
Longlin Yu
BDBoyi Deng
Boyi Deng
FWFang Wang
Fang Wang
MOMingwei Ouyang
Mingwei Ouyang
WGWen Ge
Wen Ge
In order to obtain electronic contacts with good performance, Au-Cu alloy coatings with different gold contents were prepared on copper substrates by direct current electrodeposition and were tested against electrochemical corrosion and arc corrosion. The experimental results showed that the hardness of the Au-Cu alloy was in the range of 115.2 HV~171.6 HV, which meets the requirements of electronic contact materials. The polarization curve (Tafel) test and electrochemical impedance spectroscopy (EIS) test results indicated that the electrochemical corrosion resistance of Au-Cu alloy plating was much better than pure copper. With the rise of gold content in the alloy coatings, the corrosion resistance of the alloy coatings enhanced gradually. Compared with pure copper, the Au-Cu alloy coatings showed more stable contact resistance. After 1000 contacts, the resistivity of the alloy with 75% gold varied from 72 mΩ to 78 mΩ, whereas under the same conditions, the resistivity of copper changed from 14 mΩ to 78 mΩ. Anode-type material transfer occurred after 1000 contacts with a reduction in the total mass of each contact element. The mass loss of Au75Cu25 and Au86Cu14 contact elements was lower than that of pure copper. The Au-Cu alloy coatings displayed excellent arc corrosion resistance when the gold content in the alloy plating was higher than 75%.

27 November 2025 in Coatings
Verified
Journal Article
Open access
PDF file
WGWen Ge
Wen Ge
JZJia Yu Zhang
Jia Yu Zhang
XRXia Ran
Xia Ran
TCTing Chen
Ting Chen
Graphene oxide (GO) is characterized by hydrophilic edges and a more hydrophobic planar/basic skeleton, which makes it has potential applications in the field of corrosion. But its hydrophobicity hinders its co-deposition behavior in the electrolyte. To improve the corrosion resistance of copper-based substrate, this article designs and successfully prepares a nickel/chromium graphene oxide (NiCr-GO) composite coating. The paper studied the influence and mechanism of GO addition on the microstructure and corrosion resistance of the coating. The results indicate that a crack network and nodular structure have formed on the surface of the coating. The coatings with different GO contents are composed of nickel, chromium single-phase, and Cr2Ni3 inter-metallic compounds, and the grain size does not significantly change. With the increase in GO, the corrosion resistance of the composite coating is enhanced, and the optimal GO addition amount is 0.750 g/L. GO chips may form physical barriers in the crystal structure defects of the coating, or passive films on the material surface. This dual mechanism is the fundamental reason for improving the corrosion resistance of NiCr-GO.