Yuxiang Han

Ms. Yuxiang Han

Natioanl Key laboratory for Electronic Measurement Technology, North University of China, Taiyuan

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 June 2023 in IEEE Internet of Things Journal
Verified
Journal Article
Closed access
HZHaibo Zhao
Haibo Zhao
YMYongtao Ma
Yongtao Ma
YHYuxiang Han
Yuxiang Han
CTChenglong Tian
Chenglong Tian
XHXinyue Huang
Xinyue Huang
The four stages (first heart sound (S1), systole, second heart sound (S2), and diastole) of heartbeat sounds recorded by contact seismocardiogram (SCG) reflect the health of the heart, but these stages are challenging to measure by noncontact millimeter wave radar. If the sampling rate of millimeter wave radar is increased, this will increase the amount of data storage needed for the long-term monitoring of human vital signs. This article presents an algorithm for reconstructing the envelope of high-frequency heart sound signals using low-frequency millimeter wave radar signals, as well as a heart sound envelope segmentation algorithm based on peak points. Its design principle is a combination of signal processing and a transformer network, which is called T-HSER. This technique maps the low-frequency radar signal into a high-frequency heart sound envelope signal through the transformer network and determines the four different stages of the heart sound using appropriate thresholds. Based on the training of more than 30000 heartbeats of 25 healthy subjects and the prediction evaluation of six subjects, the T-HSER algorithm is shown to reconstruct the high-frequency heart sound envelope signal with high correlation. Moreover, the mean correlation can reach 0.85 on one minute of data, which is higher than that of the bidirectional long short-term memory algorithm, and can effectively distinguish the four stages of the heart sound so that the mean absolute error (MAE) between the predicted value and the ground truth of S1 and S2 is within a tolerable range (70 ms). At the same time, the algorithm is suitable for low sampling rate radar, which greatly reduces the amount of data storage required.

23 September 2021 in Sensors
Verified
Journal Article
Open access
PDF file
YHYuxiang Han
Yuxiang Han
XZXiao-ming Zhang
Xiao-ming Zhang
ZLZhengxi Lai
Zhengxi Lai
YGYuchen Geng
Yuchen Geng
To solve the problem of heavy workload and high cost when acquiring the position of Ultra-Wideband (UWB) mobile base stations in sports fields, a fast self-positioning algorithm for UWB mobile base stations algorithm based on Time of Flight (TOF) is proposed. First, according to the layout of the base stations in the sports field, the local coordinate system is determined, and an equation based on the ranging information between the base stations is established; the Least Square method is used to calculate the coordinates of each base station, and the Newton Iteration method is used to converge the positioning results. Then the origin and propagation law of positioning error, as well as the method of reducing the positioning error are analyzed. The simulation data and experimental results show that the average positioning accuracy of the mobile base station is within 0.05 m, which meets the expected accuracy of the base station position measurement. Compared with traditional manual measurement methods, base station self-positioning can effectively save deployment time and reduce workload.

14 June 2024 in IEEE Sensors Journal
Verified
Journal Article
Closed access
XLXiuyan Liang
Xiuyan Liang
YMYongtao Ma
Yongtao Ma
CTChenglong Tian
Chenglong Tian
YHYuxiang Han
Yuxiang Han
KLKaihua Liu
Kaihua Liu
As the development of the industry’s digital transformation driven by 5G-Advanced, an increasing need for higher precision arises in using radio frequency identification (RFID) to enable product traceability across the production chain, warehouse management, and the retail network. The last decade has witnessed a significant advancement in phase-based methods for object localization, with a growing emphasis on accuracy. However, deviations in phase values caused by signal attenuation, Doppler frequency shift and measurement-induced error during the movement process are typically disregarded. In this article, Moc-SAR, a motion compensation for synthetic aperture-based holographic localization method via a moving UHF RFID system is proposed. In this framework, a scheme of data processing based on synthetic aperture measurement, removal of phase jumps and stationary samplings, phase differential as well as data grouping, is proposed to construct the dataset. Then the XGBoost-based motion compensation model is trained considering potential influenced factors like phase, Doppler frequency, received signal strength (RSS) and coordinates of virtual antenna elements. The prediction results of phase is utilized for holographic localization. The variations of the dataset at each stage during the scheme of data processing are visualized. Statistical analysis of root mean square error (RMSE) illustrates that the trained XGBoost model achieves satisfactory predictive performance. Further numerical analysis of the phase offset factors is conducted based on the measured data. Experimental results of the test dataset utilized to holographic localization show that Moc-SAR performs superiorly on accuracy, effectively dealing with deviation on phase measurements in multipath environment.

6 March 2024 in IEEE Sensors Journal
Verified
Journal Article
Closed access
YHYuxiang Han
Yuxiang Han
YMYongtao Ma
Yongtao Ma
XLXiuyan Liang
Xiuyan Liang
YLYiwei Lu
Yiwei Lu
The positioning based on ultra-wideband (UWB) mostly requires the target to carry labels, which is called active positioning. This method requires a constant power supply for the tag and is not suitable for continuous positioning. Therefore, we propose a localization method called passive localization that achieves target position perception without wearing assistive devices. Tomography, as one of the most promising passive positioning techniques, has many advantages. However, traditional tomography methods require a large number of fixed-position transceivers to form dense links to ensure positioning accuracy. In underground environments such as tunnels, personnel positioning requires as few transceivers as possible to achieve positioning. To reduce the number of devices, we propose a positioning system based on the moving single anchor, which obtains the signal’s flight time through communication between the moving anchor and the positioning tag. Time of flight tomography is by utilizing the influence of the target on the communication time of each link. To better eliminate the error of multi-target monitoring in dense links, an elliptical model based on the first Fresnel region radius is proposed. Simulation and experiments have shown that the single target positioning accuracy reaches 0.1 m in a positioning area of 6m × 6m, and the maximum positioning error for 8 targets is 0.5 m. The positioning error of multi-target positioning is reduced by about 85% compared to the method of multi-anchor fixation. Prove that this method has good multi-target localization.

9 January 2025 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
YLYiwei Lu
Yiwei Lu
YMYongtao Ma
Yongtao Ma
YHYuxiang Han
Yuxiang Han
LZLianfu Zhao
Lianfu Zhao
HZHaibo Zhao
Haibo Zhao
In the realm of smart homes, the emphasis lies in fostering seamless interaction between user-device and device-device within their environment, bringing convenience to both work and life. However, users may not always carry signal transceiving devices to establish connections with the environment. In such cases, device-free localization (DFL) plays a pivotal role. DFL involves identifying targets, precisely locating them, and providing feedback to other devices, thereby filling the information gap for targets without carried interactive devices. Most traditional passive UHF RFID localization methods can only achieve single-target localization at a time, while many application scenarios require multi-target localization. To address this challenge, this paper proposes a device-free multi-target Link Fingerprint (DMLF) localization method. DMLF analyzes the impact of targets on the UHF RFID links, extracts target-specific features from the observation data. A novel approach to link fingerprint localization is introduced, involving the compression and reconstruction of feature information into link fingerprints. Furthermore, considering the characteristics of link fingerprints, virtual reference fingerprints and dynamic fingerprint clustering are introduced to enhance localization accuracy and reduce computational overhead. There is no need for personnel to collect fingerprint data at sampling points during the offline phase, compared to received signal strength indicator (RSSI) fingerprints, link fingerprints provide a more accurate reflection of the target’s position and exhibit stronger robustness. This method reduces the storage requirements for the fingerprint database and computational complexity. Experimental results indicate that, in comparison to traditional localization methods, the DMLF algorithm achieves higher accuracy. The average localization accuracies for scenarios with 1 to 5 targets are 0.2679m, 0.3962m, 0.4937m, 0.7637m, and 1.2226m, respectively, with link fingerprints contributing to the enhanced precision of localization.

6 March 2025 in IEEE Sensors Journal
Verified
Journal Article
Closed access
JWJingru Wei
Jingru Wei
YMYongtao Ma
Yongtao Ma
YHYuxiang Han
Yuxiang Han
The Ultra-wideband device-free localization (DFL) technique is promising due to its ability to localize targets without needing additional equipment. In particular, the radio tomographic imaging (RTI) method is of interest due to its low cost and ease of deployment. Traditional RTI methods, which depend on line-of-sight (LOS) path and analyze the variation of received signal strength (RSS), often struggle with multipath interference, especially when the distance between targets is close. This can lead to degraded image quality due to the increased presence of multipath components. To overcome this challenge, this study adopts a single moving anchor deployment method, utilizing communication between a moving anchor and fixed tags to obtain Channel Impulse Response (CIR) information. Preprocessing such as interpolation and alignment of CIR data is performed, followed by the computation of correlation coefficients under on-load and no-load conditions to serve as inputs for the RTI model. Furthermore, to solve the problem of close-range target overlap, the K-Means clustering algorithm is applied to post-process the correlation coefficients. The threshold detection algorithm is utilized to correct the correlation coefficients. Experiments show that the algorithm based on CIR can achieve effective differentiation and localization of close-range targets in typical indoor scenes.