Deja Muck

Prof. Deja Muck

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 December 2021 in Polymers
Verified
Journal Article
Open access
PDF file
MPMatej Pivar
Matej Pivar
DGDiana Gregor-Svetec
Diana Gregor-Svetec
DMDeja Muck
Deja Muck
The aim of our research was to investigate and optimise the main 3D printing process parameters that directly or indirectly affect the shape transformation capability and to determine the optimal transformation conditions to achieve predicted extent, and accurate and reproducible transformations of 3D printed, shape-changing two-material structures based on PLA and TPU. The shape-changing structures were printed using the FDM technology. The influence of each printing parameter that affects the final printability of shape-changing structures is presented and studied. After optimising the 3D printing process parameters, the extent, accuracy and reproducibility of the shape transformation performance for four-layer structures were analysed. The shape transformation was performed in hot water at different activation temperatures. Through a careful selection of 3D printing process parameters and transformation conditions, the predicted extent, accuracy and good reproducibility of shape transformation for 3D printed structures were achieved. The accurate deposition of filaments in the layers was achieved by adjusting the printing speed, flow rate and cooling conditions of extruded filaments. The shape transformation capability of 3D printed structures with a defined shape and defined active segment dimensions was influenced by the relaxation of compressive and tensile residual stresses in deposited filaments in the printed layers of the active material and different activation temperatures of the transformation.

24 August 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
AUAndrej Učakar
Andrej Učakar
ASAna Sterle
Ana Sterle
MVMartina Vuga
Martina Vuga
TPTamara Trček Pečak
Tamara Trček Pečak
DTDenis Trcek
Denis Trcek
TKTanja Nuša Kočevar
Tanja Nuša Kočevar
The paper presents an interdisciplinary approach to the treatment of the FormaViva collection of wooden sculptures exhibited outdoors in a natural environment near the Božidar Jakac Art Museum in Kostanjevica na Krki in Slovenia. The study focuses on 3D graphic representations of sculptures created with photogrammetry and 3D modelling. The results are photorealistic renderings, interactive presentations, 3D printed reproductions, jewellery, and interpretive animations. The research results show that graphic documentation techniques on 3D models allow for a more detailed investigation of the original structural identity of the sculpture. By incorporating 3D and interactive technologies, we are expanding the usability of cultural heritage objects. By using interpretive techniques that have led to jewellery and interpretive animations in our research, we not only breathe new life into the sculptures, but also enrich the stories of the sculptures with our own experiences of the sculptural work.

27 July 2024 in Polymers
Verified
Journal Article
Open access
PDF file
MPMatej Pivar
Matej Pivar
Urška Vrabič-BrodnjakUrška Vrabič-Brodnjak
Urška Vrabič-Brodnjak
MLMirjam Leskovšek
Mirjam Leskovšek
DGDiana Gregor-Svetec
Diana Gregor-Svetec
DMDeja Muck
Deja Muck
This study identifies the optimal combination of active and passive thermoplastic materials for producing multi-material programmable 3D structures. These structures can undergo shape changes with varying radii of curvature over time when exposed to hot water. The research focuses on examining the thermal, thermomechanical, and mechanical properties of active (PLA) and passive (PRO-PLA, ABS, and TPU) materials. It also includes the experimental determination of the radius of curvature of the programmed 3D structures. The pairing of active PLA with passive PRO-PLA was found to be the most effective for creating complex programmable 3D structures capable of two-sided transformation. This efficacy is attributed to the adequate apparent shear strength, significant differences in thermomechanical shrinkage between the two materials, identical printing parameters for both materials, and the lowest bending storage modulus of PRO-PLA among the passive materials within the activation temperature range. Multi-material 3D printing has also proven to be a suitable method for producing programmable 3D structures for practical applications such as phone stands, phone cases, door hangers, etc. It facilitates the programming of the active material and ensures the dimensional stability of the passive components of programmable 3D structures during thermal activation.

12 November 2020
Verified
Conference Paper
Closed access
MČMarjeta Čuk
Marjeta Čuk
MBMatejka Bizjak
Matejka Bizjak
DMDeja Muck
Deja Muck
TKTanja Nuša Kočevar
Tanja Nuša Kočevar
3D printing is used to produce individual objects or to print on different substrates to produce multi-component products. In the textile industry, we encounter various 3D printing technologies in fashion design, functional apparel manufacturing (protective, military, sports, etc.), including wearable electronics, where textile material is functionalized. 3D printing enables the personalization of the product, which in the apparel industry can be transformed into the production of clothing or parts of clothing or custom accessories. Additive technology allows a more rational use of the material than traditional technologies. In the textile industry we meet different uses of it, one is the printing of flexible structures based on rigid materials, another is the printing with flexible materials and the third is the printing directly on textile substrate. All rigid, hard and soft or flexible materials can be integrated into the final design using 3D printing directly on the textile substrate. We speak of so-called multi-material objects and systems, which have many advantages, mainly in the increasing customization and functionalization of textiles or clothing. The article gives a broader overview of 3D printing on textiles and focuses mainly on the influence of different parameters of printing and woven fabric properties on the adhesion of 3D printed objects on the textile substrate. In our research we investigated the influence of twill weave and its derivate as well as different weft densities of the woven fabric on the adhesion of printed objects on textile substrate. Therefore, five samples of twill polyester/cotton fabrics were woven and their physical properties measured for this research. 3D objects were printed on textile substrates using the extrusion based additive manufacturing technique with polylactic acid (PLA) filament. Preliminary tests were carried out to define printing parameters and different methods of attaching the fabric to a printing bed were tested. T - Peel adhesion tests were performed on the Instron dynamometer to measure the adhesion between 3D printed objects and textile substrates.

29 October 2021 in Polymers
Verified
Journal Article
Open access
PDF file
DMDeja Muck
Deja Muck
HTHelena Gabrijelčič Tomc
Helena Gabrijelčič Tomc
UEUrška Stanković Elesini
Urška Stanković Elesini
MRMaruša Ropret
Maruša Ropret
MLMirjam Leskovšek
Mirjam Leskovšek
The aim of the study was to analyse the colour fastness of 3D printed samples that could be used as decorative or household items. Such items are often fabricated with 3D printing. The colour of filaments affects not only the mechanical properties, but also the appearance and user satisfaction. Samples of biocomposite filaments (PLA and PLA with added wood and hemp fibres) were used. First, the morphological properties of the filaments and 3D printed samples were analysed and then, the colour fastness against different agents was tested (water, oil, detergent, light and elevated temperature). Finally, the dynamic mechanical properties of the filaments and 3D printed samples were determined. The differences in the morphology of the filaments and 3D printed samples were identified with SEM analysis. The most obvious differences were observed in the samples with wood fibres. All printed samples showed good resistance to water and detergents, but poorer resistance to oil. The sample printed with filaments with added wood fibres showed the lowest colour fastness against light and elevated temperatures. Compared to the filaments, the glass transition of the printed samples increased, while their stiffness decreased significantly. The lowest elasticity was observed in the samples with wood fibres. The filaments to which hemp fibres were added showed the reinforcement effect. Without the influence on their elasticity, the printed samples can be safely used between 60 and 65 °C.

12 November 2020
Verified
Conference Paper
Closed access
KKKarin Košak
Karin Košak
DMDeja Muck
Deja Muck
MČMarjeta Čuk
Marjeta Čuk
TKTanja Nuša Kočevar
Tanja Nuša Kočevar
In the article we present the educational process in which design students were guided through their design process, creating 3D printed jewellery inspired by the Forma Viva sculptures of the outdoor gallery Kostanjevica na Krki. The assignment was part of the international project Cumulus Re/Forma Viva, whose main goal was to implement digitization using 3D technology in the field of education for the preservation of cultural heritage. The task given to the 1st year masters students of Fashion and Textile Design at the Department of Textiles, Graphic arts and Design at the University of Ljubljana was to select a wooden sculpture and transform the visual and conceptual idea into a 3D printed jewellery collection. The curriculum of the course includes teaching the theoretical basics of 3D printing, 3D print design – fashion accessories and new production, business and marketing models as "disruptive" changes that result from this. In the practical part, students will learn the advanced design process of fashion accessory objects, including 3D technologies such as 3D modelling and 3D printing. Students are guided through a process in which selected visual and conceptual content is translated into fine jewellery that can be created using various 3D printing technologies. In this way, students tested themselves in two new areas that allowed them to expand their design knowledge and experience in 3D modelling and jewellery design with the goal of better "arming" themselves with the latest technologies for today's competitive world.