Zirconia nanomaterials were prepared by impregnation of KIL-2 type silica with 4, 8 and 12 wt.% ZrO₂ and were modified by sulphate groups in order to vary the type and strength of acidity. Samples were characterized by X-ray powder diffraction (XRD), transmission electron microscopy (TEM), and N₂ physisorption methods. Acidic properties of adsorbed pyridine were investigated by FT-IR spectroscopy. The catalytic performance of ZrKIL-2 and SO₄ ²⁻/ZrKIL-2 in glycerol esterification with acetic acid was studied and compared to that of pure zirconia varieties. It was found that silica-supported zirconia samples are more active than pure zirconia ones. With increasing ZrO₂ content, KIL-2-supported catalysts showed increasing catalytic activity and selectivity in producing valuable fuel additives, di- and triacetyl glycerols. Sulphated analogues showed even higher activity and selectivity compared to non-sulphated ones due to their strong Brönsted acidity.

Fly ash (FA) from lignite coal combusted in different Thermal Power Plants (TPPs) was used for the synthesis of zeolites (FAZs) of the Na-X type by alkaline activation via three laboratory procedures. FAZs were characterized with respect to their morphology, phase composition and surface properties, which predetermine their suitability for applications as catalysts and adsorbents. FAZs were subsequently modified with metal oxides (CuO) to improve their catalytic properties. The catalytic activity of non-modified and CuO-modified FAZs in the total oxidation of volatile organic compounds was investigated. FAZs were studied for their potential to retain CO₂, as their favorable surface characteristics and the presence of iron oxides make them suitable for carbon capture technologies. Thin films of FAZs were deposited by in situ crystallization, and investigated for their morphology and optical sensitivity when exposed to pollutants in the gas phase, e.g., acetone. This study contributes to the development of novel technological solutions for the smart and valuable utilization of FA in the context of the circular economy and green energy production.