Historic masonry heritages, such as cathedrals, colonnades, and arch bridges, were constructed with individual components (e.g., stones, bricks, other materials) bound together with, e.g., mortar, and they are very vulnerable to foundation settlement, especially differential settlement which occurs frequently in engineering practice. These masonry structures are discontinuous, and therefore, their behavior under differential settlement is highly nonlinear and complex. In this study, the combined finite-discrete element method (FDEM) is employed to simulate the failure behavior of historic masonry heritages subjected to support differential settlement. In the FDEM models, structures are discretized into elements where FE formulation is incorporated, resulting in an accurate estimate of structural deformation and interaction forces. In addition, a fracture model is employed for masonry blocks. Numerical examples are given and compared with results from the literature, showing that the FDEM is applicable and reliable in simulating the failure behavior of historic masonry heritages. Further analyses including block fracture reveal that fracturing can decrease the capacity against settlement significantly.
Slope failure behaviour of noncohesive media with the consideration of gravity and ground excitations is examined using the two-dimensional combined finite–discrete element method (FDEM). The FDEM aims at solving large-scale transient dynamics and is particularly suitable for this problem. The method discretises an entity into a couple of individual discrete elements. Within each discrete element, the finite element method (FEM) formulation is embedded so that contact forces and deformation between and of these discrete elements can be predicted more accurately. Noncohesive media is simply modelled with assembly of individual discrete elements without cohesion, that is, no joint elements need to be defined. To validate the effectiveness of the FDEM modelling, two examples are presented and compared with results from other sources. The FDEM results on gravitational collapse of rectangular soil heap and landslide triggered by the Chi-Chi earthquake show that the method is applicable and reliable for the analysis of slope failure behaviour of noncohesive media through comparison with results from other known methods such as the smoothed particle hydrodynamics (SPH), the discrete element method (DEM) and the material point method (MPM).
Although long-span suspension bridges play a vital role in the transportation infrastructure, their resistance to disproportionate collapse resulting from locally induced damage has not yet been adequately investigated. In this study, computational simulation is used to shed light on how a prototype long-span suspension bridge responds to sudden loss of suspenders. Several scenarios were considered, with a focus on the total number of suspenders lost, their locations, and mode of removal. An increasing number of suspenders were removed either sequentially (i.e., one at a time) or simultaneously (i.e., multiple suspenders removed at the same time) until progressive collapse of the bridge was triggered. The simulation results showed that the bridge exhibited increasing levels of damage as the number of removed suspenders increased, and that the most critical location for suspender removal was near the middle of the bridge. It is shown that the sequential loss of a group of suspenders led to bridge responses that are almost identical with the simultaneous loss of the same group of suspenders. It is also argued that suspension bridges like the prototype system under consideration are highly robust.
Masonry buildings are very popular all over the world, and generally, they are assemblages of masonry units and mortar. However, they are prone to damage and even collapse due to the characteristics of masonry structures. The damages are mainly caused by natural disasters (e.g., flooding, earthquake, and landslide) or human activities (e.g., fire, vehicular impact, and insufficient maintenance). In order to assess the damage to masonry buildings, many approaches are commonly employed, such as on-site investigation, lab testing and experiments, and numerical simulations. In addition, retrofitting is always required for these damaged buildings, and resilience can be obtained to some extent by relying on different strengthening strategies. This article presents a state-of-the-art review of the current research on the multi-hazard assessment of masonry buildings, with a focus on three aspects, i.e., (1) natural and anthropic damages to masonry buildings; (2) applicability and reliability of analysis methods; and (3) strengthening technologies. A rapid and beneficial understanding is expected on the damages, analysis, and protection of ancient and modern masonry buildings.