Historic masonry heritages, such as cathedrals, colonnades, and arch bridges, were constructed with individual components (e.g., stones, bricks, other materials) bound together with, e.g., mortar, and they are very vulnerable to foundation settlement, especially differential settlement which occurs frequently in engineering practice. These masonry structures are discontinuous, and therefore, their behavior under differential settlement is highly nonlinear and complex. In this study, the combined finite-discrete element method (FDEM) is employed to simulate the failure behavior of historic masonry heritages subjected to support differential settlement. In the FDEM models, structures are discretized into elements where FE formulation is incorporated, resulting in an accurate estimate of structural deformation and interaction forces. In addition, a fracture model is employed for masonry blocks. Numerical examples are given and compared with results from the literature, showing that the FDEM is applicable and reliable in simulating the failure behavior of historic masonry heritages. Further analyses including block fracture reveal that fracturing can decrease the capacity against settlement significantly.
15 June 2023 in Journal of Constructional Steel Research
To boost the performance of the air-cooling battery thermal management system, this study designed a novel vortex adjustment structure for the conventional air-cooling battery pack used in electric vehicles. T-shape vortex generating columns were proposed to be added between the battery cells in the battery pack. This structure could effectively change the aerodynamic patterns and thermodynamic properties of the battery pack, including turbulent eddy frequency, turbulent kinetic energy, and average Reynolds number, etc. The modified aerodynamic patterns and thermodynamic properties increased the heat transfer coefficient with little increase in energy consumption and almost no additional cost. Different designs were also evaluated and optimized under different working conditions. The results showed that the cooling performance of the Design 1 improved at both low and high air flow rates. At a small flow rate of 11.88 L/s, the Tmax and ΔT of Design 1 are 0.85 K and 0.49 K lower than the conventional design with an increase in pressure drop of 0.78 Pa. At a relative high flow rate of 47.52 L/s, the Tmax and ΔT of the Design 1 are also 0.46 K and 0.13 K lower than the conventional design with a slight increase in pressure drop of 17.88 Pa. These results demonstrated that the proposed vortex generating design can improve the cooling performance of the battery pack, which provides a guideline for the design and optimization of the high-performance air-cooling battery thermal management systems in electric vehicles.
Due to the brittleness, monolithic glass may fracture under impact, resulting in catastrophic sequences. The combined finite-discrete element method, i.e., FDEM, is employed to investigate both the oblique and the perpendicular impact failures of monolithic glass parametrically, particularly the soda-lime glass. Using FDEM, glass is discretised into discrete elements where a finite element formulation is incorporated, leading to accurate evaluation of the contact forces and structural deformation. Following the basic theories of the FDEM, a cohesive Mode I fracture model of glass is briefly introduced. Numerical examples are given for the verification of the employed fracture model and the applicability of the FDEM, and comparisons have been made against the computational and experimental results in the literature. The investigated parameters include the impact velocity, the impact angle, the material properties of glass, etc. The obtained results not only revealed the impact fracture mechanism of soda-lime glass but also provided guidance for its design and manufacturing.
The behaviour of dry-joint masonry arch structures is highly nonlinear and discontinuous since they are composed of individual discrete blocks. These structures are vulnerable to seismic excitations. It is difficult for traditional methods like the standard finite element method (FEM) to simulate masonry failure due to their intrinsic limitations. An advanced computational approach, i.e., the combined finite-discrete element method (FDEM), was employed in this study to examine the first-order seismic capacity of masonry arches and buttressed arches with different shapes subjected to gravity and constant horizontal acceleration. Within the framework of the FDEM, masonry blocks are discretised into discrete elements. A finite element formulation is implemented into each discrete element, providing accurate predictions of the deformation of each block and contact interactions between blocks. Numerical examples are presented and validated with results from the existing literature, demonstrating that the FDEM is capable of capturing the seismic capacities and hinge locations of masonry arch structures. Further simulations on geometric parameters and friction coefficient of masonry buttressed arches were conducted, and their influences on the seismic capacities are revealed.
The stability of rock slopes is of significance, as even the slightest slope failure can result in damage to infrastructure and catastrophes for human beings. Thus, this article focuses on the review of the current techniques available for rock slope stability analysis. The rock slope stability techniques can be classified as conventional methods and numerical methods. The advantages and limitations of the conventional method are briefly reviewed. The numerical methods mainly included three types, i.e., continuum methods, discontinuum methods, and the combined/hybrid continuum–discontinuum methods. This article pays more attention to the last type. The combined/hybrid finite–discrete element method (FDEM), which might be the most widely used continuum–discontinuum method, is introduced and we illustrated its abilities in modelling the entire rock slope failure process. The fundamental principles of FDEM, i.e., the contact interaction of the discrete bodies and the transition from continuum to discontinuum, are introduced in detail. The abilities of the FDEM in modelling the rock slope failure process are calibrated by modelling the entire typical rock slope failure process. Then, the application of the FDEM in the analysis of slope stability is introduced and discussed. Finally, the authors give insight into the GPGUP-parallelized FDEM modelling of the high rock slope failure process by the implementation of the strength reduction method (SRM). It is concluded that the FDEM can effectively model the entire rock slope failure process, even without the implantation of any slope modes, and the GPGUP-parallelized FDEM is a promising tool in the study and application of rock slope stabilities.