Historic masonry heritages, such as cathedrals, colonnades, and arch bridges, were constructed with individual components (e.g., stones, bricks, other materials) bound together with, e.g., mortar, and they are very vulnerable to foundation settlement, especially differential settlement which occurs frequently in engineering practice. These masonry structures are discontinuous, and therefore, their behavior under differential settlement is highly nonlinear and complex. In this study, the combined finite-discrete element method (FDEM) is employed to simulate the failure behavior of historic masonry heritages subjected to support differential settlement. In the FDEM models, structures are discretized into elements where FE formulation is incorporated, resulting in an accurate estimate of structural deformation and interaction forces. In addition, a fracture model is employed for masonry blocks. Numerical examples are given and compared with results from the literature, showing that the FDEM is applicable and reliable in simulating the failure behavior of historic masonry heritages. Further analyses including block fracture reveal that fracturing can decrease the capacity against settlement significantly.
9 October 2020 in Computational Particle Mechanics
Masonry arches are usually composed of individual blocks or voussoirs, which are highly discontinuous and nonlinear, and it is extremely difficult or even impossible to simulate their collapse behavior using finite element methods. Therefore, a combined finite–discrete element method (FDEM) is employed to simulate the collapse behavior of dry-joint masonry arches induced by spreading supports. With finite elements incorporated into discrete elements, both the deformation of arch voussoirs and the interaction between them such as contact can be predicted accurately. Moreover, a cohesive fracture model is implemented to simulate the potential rupture of masonry voussoirs. Based on them, several examples are validated with experiments, and the results indicate that the FDEM is able to simulate the collapse of masonry arches well. Furthermore, a parametric study is conducted on selected geometric and physical parameters to investigate the collapse of masonry arches due to support movements. The influences of friction and voussoir fracture where limited attention was paid to are also examined.
Slope failure behaviour of noncohesive media with the consideration of gravity and ground excitations is examined using the two-dimensional combined finite–discrete element method (FDEM). The FDEM aims at solving large-scale transient dynamics and is particularly suitable for this problem. The method discretises an entity into a couple of individual discrete elements. Within each discrete element, the finite element method (FEM) formulation is embedded so that contact forces and deformation between and of these discrete elements can be predicted more accurately. Noncohesive media is simply modelled with assembly of individual discrete elements without cohesion, that is, no joint elements need to be defined. To validate the effectiveness of the FDEM modelling, two examples are presented and compared with results from other sources. The FDEM results on gravitational collapse of rectangular soil heap and landslide triggered by the Chi-Chi earthquake show that the method is applicable and reliable for the analysis of slope failure behaviour of noncohesive media through comparison with results from other known methods such as the smoothed particle hydrodynamics (SPH), the discrete element method (DEM) and the material point method (MPM).
13 November 2019 in Computational Particle Mechanics
As assemblage of blocks, masonry arch structures are highly discontinuous. The combined finite–discrete element method (FDEM) where finite elements are incorporated into discrete elements is employed to investigate the dynamic failure behaviour of dry-joint masonry arch structures subjected to base motions in this paper. By using this method, both the internal deformation of blocks and the contact action between blocks could be simulated accurately. With a cohesive fracture model implemented, rupture of blocks is also considered. Oppenheim’s arch and buttresses-supported arch structures are examined. Numerical results are compared with those from analytical and other computational sources. Failure thresholds for both monolithic and multi-block buttresses–arch masonry structures are provided. Typical failure modes due to hinge instability and ring separation are identified. Relationships between triggering factors and failure modes are revealed for future research. In general, the FDEM is proven to be successful in simulating the dynamic failure of dry-joint masonry arch structures.
This paper aims to investigate the responses of laminated glass under soft body impact, including elastic impact and fracture/fragmentation consideration. The simulation uses the combined finite-discrete element method (FDEM) which combines finite element mesh into discrete elements, enabling the accurate prediction of contact force and deformation. Material rupture is modelled with a cohesive fracture criterion, evaluating the process from continua to discontinua. Responses of laminated glass under soft impact (both elastic and fracture) agree well with known data. Crack initiation time in laminated glass increases with the increase of the outside glass thickness. With the increase of Eprojectile, failure mode is changing from flexural to shear, and damage tends to propagate longitudinally when the contact surface increases. Results show that the FDEM is capable of modelling soft impact behaviour of laminated glass successfully. The work is done in 2D, and it will not represent fully the 3D mechanisms. Elastic and fracture behaviour of laminated glass under soft impact is simulated using the 2D FDEM. Limited work has been done on soft impact of laminated glass with FDEM, and special research endeavours are warranted. Benchmark examples and discussions are provided for future research.