Wearable E-textile systems should be comfortable so that highest efficiency of their functionality can be achieved. The development of electronic textiles (functional textiles) as a wearable technology for various applications has intensified the use of flexible wearable functional textiles instead of wearable electronics. However, the wearable functional textiles still bring comfort complications during wear. The purpose of this review paper is to sightsee and recap recent developments in the field of functional textile comfort evaluation systems. For textile-based materials which have close contact to the skin, clothing comfort is a fundamental necessity. In this paper, the effects of functional finishing on the comfort of the textile material were reviewed. A brief review of clothing comfort evaluations for textile fabrics based on subjective and objective techniques was conducted. The reasons behind the necessity for sensory evaluation for smart and functional clothing have been presented. The existing works of literature on comfort evaluation techniques applied to functional fabrics have been reviewed. Statistical and soft computing/artificial intelligence presentations from selected fabric comfort studies were also reviewed. Challenges of smart textiles and its future highlighted. Some experimental results were presented to support the review. From the aforementioned reviews, it is noted that the electronics clothing comfort evaluation of smart/functional fabrics needs more focus.

Consumers expect high-performance functionality from sportswear. To meet athletic and leisure-time activity requirements, further research needs to be carried out. Sportswear layers and their specific thermal qualities, as well as the set and air layer between materials, are all important factors in sports clothing. This research aims to examine the thermal properties of sports fabrics, and how they are affected by structure parameters and maintained with different layers. Three inner and four outer layers of fabric were used to make 12 sets of sportswear in this study. Before the combination of outer and inner layers, thermal properties were measured for each individual layer. Finally, the thermal resistance, thermal conductivity, thermal absorptivity, peak heat flow density ratio, stationary heat flow density, and water vapor permeability of bi-layered sportswear were evaluated and analyzed. The findings show that sportswear made from a 60% cotton/30% polyester/10% elastane inner layer and a 100% polyester outer layer had the maximum thermal resistance of 61.16 (×10³ K·m² W⁻¹). This performance was followed by the sample made from a 90% polyester/10% elastane inner layer and a 100% polyester outer layer, and the sample composed of a 100% elastane inner layer and a 100% polyester outer layer, which achieved a thermal resistance value of 60.41 and 59.41 (×10³ K·m² W⁻¹), respectively. These results can be explained by the fact that thicker textiles have a higher thermal resistance. This high-thermal-resistance sportswear fabric is appropriate for the winter season. Sportswear with a 90% polyester/10% elastane inner layer had worse water vapor resistance than sportswear with a 60% cotton/30% polyester/10% elastane and a 100% elastane layer. Therefore, these sports clothes have a higher breathability and can provide the wearers with very good comfort. According to the findings, water vapor permeability of bi-layered sportswear is influenced by geometric characteristics and material properties.

Flexible supercapacitors are highly demanding due to their wearability, washability, lightweight property and rollability. In this paper, a comprehensive review on flexible supercapacitors based on conductive polymers such as polypyrrole (PPy), polyaniline (PANI) and poly(3,4-ethylenedioxtthiophne)-polystyrene sulfonate (PEDOT:PSS). Methods of enhancing the conductivity of PEDOT:PSS polymer using various composites and chemical solutions have been reviewed in detail. Furthermore, supercapacitors based on carbonized banana peels and methods of activation have been discussed in point. This review covers the up-to-date progress achieved in conductive polymer-based materials for supercapacitor electrodes. The effect of various composites with PEDOT:PSS have been discussed. The review result indicated that flexible, stretchable, lightweight, washable, and disposable wearable electronics based on banana peel and conductive polymers are highly demanding.