A numerical approach is established to study the hydrodynamic performance using an amphibious transport vehicle (ATV) as a research object. Numerical calculation based on the Reynolds average Navier–Stokes method is studied in terms of first layer grid height, surface meshing partition scale, and prismatic layer coefficient. Through uncertainty analysis, the correctness and convergence of the numerical approach are verified. Towing tests are conducted to compare the experimental data with the simulation results, which validated the reliability of the numerical approach under all working conditions. Results show that the numerical approach will affect the simulated results, with an average error of 3.91% for the resistance and 4.21% for the trim, meeting the requirements for analysis accuracy. Based on the proposed numerical approach, an optimization design is carried out to improve the hydrodynamic performance of the ATV. Effects of bow plate angle, stern flap angle, and stern flap install height are studied. Latin hypercube is used for sampling in optimization design, and the Kriging method is applied to establish an approximate model. The cross-validation is carried out using the leave-one-out method. Particle swarm optimization is used for parameter optimization, and the optimized configuration is verified using the numerical approach. Results indicate that the combination of bow plate and stern flap shows excellent improvement in the hydrodynamic performance of amphibious vehicles. Numerical error of the approximate model is only 0.292%, which fully verifies its accuracy and effectiveness. The optimized ATV configuration shows the best drag reduction performance of 38.81% compared to the original model.
A six-wheel vehicle chassis scheme with a variable wheelbase is proposed to improve the lateral dynamic performance of vehicles. The yaw moment is varied by changing the wheelbase to enhance the lateral dynamic performance of the vehicle. A vehicle lateral dynamics model is established using this approach. The effects of the wheelbase variation on the lateral yaw rate gain, steering stability, and steering error are analysed via numerical calculations. A strategy for wheelbase variation under different working conditions is proposed to enhance the lateral dynamic performance. In addition, by studying the response of the vehicle to various lateral disturbance forces, it is verified that the wheelbase change can enhance the lateral anti-disturbance capability of the vehicle. The simulation verifies the effectiveness of the wheelbase change strategy under a variety of driving conditions.
25 February 2019 in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
Hybrid mobile robots with multiple locomotion modes are getting more and more popular in search and rescue (SAR) and explosive object disposal (EOD) missions because of their good terrain adaptability. Present researchers devote themselves to develop efficient and reliable transition method between different locomotion modes to make the hybrid robot more compact and flexible. In this paper, we present a novel transition mechanism for a hybrid wheel-track based on foldable rims. The wheel rim is cut into four segments so that it is foldable. And the transition between wheel and track is achieved by the folding or unfolding of the foldable rim. According to its geometrical property during the transition process, a single-freedom supporting spoke is proposed to drive the foldable rim’s transformation. We analyze the length and angle varying principles of the supporting spoke by utilizing the kinematic mode based on screw theory. According to above results, five different kinds of transition mechanism of the supporting spoke is designed, performance comparison among which is conducted by dynamic simulations. Two of the five candidate transition mechanisms are picked up for their smaller driving force requirements. Their 3D printing prototypes are also fabricated and experiments show that the hybrid wheel-track can switch between wheel and track successfully. Compared to most hybrid robots which have separate wheels, tracks and legs, this transition mechanism makes the robot own both compact structure and multimodal locomotion.
In this study, the resistance characteristics of the amphibious vehicle in the transitional stage are studied. A deformable track wheel is designed and its effect on the amphibious vehicle’s resistance is studied. The numerical calculation method based on the RANS solver and the towing test method is used to analyse the hydrodynamic performance of the amphibious vehicle. Based on the comparison of the vehicle model with no wheel, the influence of wheels on additional resistance at the groove fault is studied. The inclination angles of the front and rear deformation wheels are studied respectively. The influence and principle of the track wheel configuration on drag are analysed and expounded in terms of pressure distribution, water climbing and spray on the wheel grooves, and the hull attitude. Finally, an adjustment strategy of the deformable configuration wheel in the transition stage is proposed.
SUMMARY: In this paper, we focus on the configuration design of a reconfigurable robot that merges the functions of wheels, tracks, and legs together. A deformable rim is utilized to make the robot wheel reconfigurable to change its locomotion mode. Three rules of configuration design to achieve reconfiguration between different modes are proposed: (1) in wheel mode, the track wheel set should be hidden inside the wheel rim; (2) in track/leg mode, the folded wheel rim should be hidden inside the caterpillar loop; (3) the circumference of the wheel rim in wheel mode should be equal to the length of the track ring in track mode. According to these rules, the configuration of the deformable rim, track wheel set, and telescopic spoke are analyzed and designed. A prototype of the reconfigurable wheel is fabricated by three-dimensional printing, and its functions of locomotion in different modes, the switch between different modes, and its load-bearing ability are tested, verifying the effectiveness of the configuration design. Furthermore, a prototype of the reconfigurable robot is manufactured by computerized numerical control (CNC) machining to verify the structural design of the reconfigurable wheel. Compared to traditional hybrid robots with separate wheels, tracks, and legs, this reconfigurable design lends the multimodal robot both excellent terrain adaptability and a compact structure; thus, it can be widely used as a universal mobile platform in search and rescue missions and explosive object disposal missions.
Amphibious vehicles, as a new type of aquatic and terrestrial transport platform, are increasingly involved in the existing transportation system. Resistance is a key factor that affects the efficiency and energy consumption of vehicles in aquatic sailing. Resistance reduction optimization design is a focal point and challenge in the design process of amphibious vehicles. In this paper, a resistance performance optimization method has been proposed based on neural networks and genetic algorithms. First, key parameters for the shape design are extracted based on a thorough understanding of the vehicle's performance. These parameters are used to construct a parameterized design space. Second, a training set is obtained based on the Latin hypercube sampling method and numerical calculation methods, and a test set is randomly generated. To achieve better resistance prediction performance, a method based on the genetic algorithm-optimized backpropagation Neural Network is proposed. Next, the resistance performance of the two operating conditions is optimized through the non-dominated sorting genetic algorithm II, and optimized configuration parameters are obtained, which has a 22.71% energy-saving ratio at cruising speed. Finally, the optimized configuration is analyzed using numerical calculation methods to validate the resistance prediction and optimization methods.