A six-wheel driving system with a variable wheelbase is proposed to improve the passing ability of unmanned vehicles. As the first step, the effect of the wheelbase variation on the axle load distribution is analyzed. Next, the relationship between the wheelbase variation and rolling resistance is obtained by numerical calculation combined with the theory of terramechanics, and it shows that the traction performance of the vehicle can be optimized by adjusting the wheelbase. Considering the deformation of tires and soil, the mechanism of the effect of the change in wheelbase on the ability of the vehicle to overcome an obstacle and cross a trench is studied, and a variable-wheelbase strategy for a vehicle overcoming an obstacle and crossing a trench is then proposed on the basis of theoretical calculations. Finally, the rationality of the variable-wheelbase strategy is verified in simulation experiments.
In order to reduce the resistance and increasing speed for a caterpillar track amphibious vehicle (CTAV), the stern flaps were applied and the influence was researched. Numerical simulations performed by STAR-CCM+ and model towing test reveal that stern flaps have greatly reduced the resistance, trim, and sinkage of the CTAV when the length Froude number is between 0.63 and 1.05. The length and flap angle were optimized by numerical simulation. In addition, the residual resistance plays a dominant role in resistance reduction, which contributes to more than 90% of the total resistance reduction. Installing stern flaps increase the vehicle waterline by 7% and enhance the virtual-length effect. Furthermore, the running attitude becomes steadier, thereby decreasing the trim and sinkage. Therefore the resistance performance of the CTAV can be enhanced by installing stern flaps with a proper length at an optimal flap angle.
A six-wheel vehicle chassis scheme with a variable wheelbase is proposed to improve the lateral dynamic performance of vehicles. The yaw moment is varied by changing the wheelbase to enhance the lateral dynamic performance of the vehicle. A vehicle lateral dynamics model is established using this approach. The effects of the wheelbase variation on the lateral yaw rate gain, steering stability, and steering error are analysed via numerical calculations. A strategy for wheelbase variation under different working conditions is proposed to enhance the lateral dynamic performance. In addition, by studying the response of the vehicle to various lateral disturbance forces, it is verified that the wheelbase change can enhance the lateral anti-disturbance capability of the vehicle. The simulation verifies the effectiveness of the wheelbase change strategy under a variety of driving conditions.
20 August 2020 in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
A variable-configuration wheeled driving system is proposed to improve the obstacle-crossing abilities of unmanned vehicles. The effects of the wheel load on the wheels’ obstacle-crossing abilities are analysed using statics theory. Similarly, the effects of the suspension’s stiffness and the adhesion coefficient on the vehicle’s obstacle-crossing ability are analysed. Numerical calculation results show that a higher wheel lift height leads to improved obstacle-crossing abilities. A strategy to adjust the system configuration during obstacle crossing is designed with the wheel lift height acting as the optimisation target. The variable-configuration strategy is verified and the optimal adjustment of the middle axle is determined through simulations. An obstacle-crossing experiment shows that a vehicle can cross a 1-m step obstacle when the proposed variable-configuration strategy is applied. The obstacle-crossing ability of the unmanned vehicle can thus be greatly enhanced.
2 April 2022 in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
A wheel-step driving system that can realise a wheel-step driving mode is proposed to improve the tractive performances of wheeled unmanned vehicles when driving on soft roads. Although the wheel-step driving system proposed in this paper adopts double wishbone suspension, it also can be applied for different suspension configurations after adjustment. In this paper, a typical sandy soil and a designated tyre are selected as hypotheses to verify the enhanced effect of wheel-step driving system on tractive performance. First, the wheel-soil interaction mechanism of the wheel-step driving mode is analysed based on terramechanics theory and the wheel-step driving strategy is optimised. The tractive performances of the wheel-step driving mode and the normal driving mode are compared and analysed through numerical calculations. Then, a soil model is established using discrete element software and a wheel model is established using dynamics software; the coupled simulation of the dynamic and discrete elements compares the drawbar pull, the driving torque and the sinkage in the normal driving mode, the wheel-step driving mode and the optimised wheel-step driving mode. The simulation data verify the effectiveness of the optimisation strategy used and the enhancement effect of the wheel-step driving mode on the traction performance. Finally, a soil-bin test system is built and a tractive performance experiment is performed. The experimental data and the simulation data show good agreement, thus verifying the correctness of the simulation model.
3 December 2020 in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
Tractive performance is a key factor affecting the field mobility of unmanned vehicles. Presently, studies on the tractive performance of unmanned vehicles mainly focus on the tractive performance of a single wheel, but few studies have used the discrete element method to predict the tractive performance of vehicles. In this paper, a method based on dynamics and discrete elements is proposed to predict the traction performance of a vehicle. Based on the proposed method, the tractive performance of an unmanned vehicle in various field environments is obtained. Firstly, a numerical method for calculating the dynamic tractive performance of the vehicle on a flat road surface is proposed based on vehicle dynamics theory and terramechanics. According to the corresponding soil parameters, the tractive performance of the vehicle on three different sandy loams and three different clays is calculated. The mechanism of action between the wheels and the soil on sloped road is different from that on flat road, and the numerical calculation method is no longer suitable for predicting the tractive performance of vehicles on sloped roads. To predict the tractive performance of unmanned vehicles on various slope roads, the dynamic and discrete element method was used to simulate a sandy loam flat road, sandy loam pitch slope, sandy loam roll slope, light clay flat road, light clay pitch slope, and light clay roll slope. The vehicle dynamics model was established using dynamics software, and the tractive performance of the vehicle on six different roads was obtained through the coupling simulation of dynamics and discrete elements.