Chongchang Yang

Chongchang Yang


Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 January 2024 in Polymers
Verified
Journal Article
Open access
PDF file
SHShiqun He
Shiqun He
XXXinkang Xu
Xinkang Xu
PFPei Feng
Pei Feng
CYChongchang Yang
Chongchang Yang
SWShengze Wang
Shengze Wang
Multi-leaf hollow-profiled fiber is a complex-shaped fiber with a hollow structure with at least three leaves arranged outside. In this work, spinning processes for the preparation of multi-leaf hollow-profiled fiber with complex cross-section patterns were proposed. Initially, the characteristics and preparation methods of multi-leaf hollow-profiled fibers were analyzed, and the key technologies for their preparation were studied. Further, micro-hole spinnerets were designed, and the numerical simulations of melt flow in the spinning channel were performed. Then, the preparation of six-leaf hollow profiled fibers was carried out to study the formation of the cross-sections. Finally, as an extension and application, an experimental verification of the melt spinning parameters’ effects on eight-leaf hollow fiber preparation was conducted. From the results of the spinning experiments, it was found that when the volume flow rate of a single hole increased from 2.33 × 10−8 m3/s to 3.33 × 10−8 m3/s, the profile degree of the spun fiber increased from 30.93% to a maximum value of 40.99%. Furthermore, when the cooling speed increased from 0.6 m/s to 1 m/s, the profile degree increased from 29.56% to 41.63%. When the initial blowing height increased from 80 mm to 140 mm, the profile degree decreased from 40.99% to 27.13%. When the spinning temperature increased from 285 °C to 290 °C, the profile degree decreased from 40.99% to 38.56%. However, the winding speed had an insignificant effect on the cross-sectional shape of the spun fibers. Moreover, the spun fibers showed good performance and a natural three-dimensional crimp function.

20 April 2022 in Polymers
Verified
Journal Article
Open access
PDF file
RZRonggen Zhang
Ronggen Zhang
PFPei Feng
Pei Feng
CYChongchang Yang
Chongchang Yang
In this work, a skin–core composite intelligent temperature-adjusting fiber was prepared using the composite melt spinning method, with polypropylene as the skin layer and T28-type paraffin as the core layer, in order to obtain clothing fibers with a bidirectional temperature adjustment function. A differential scanning calorimeter was used to test the phase-change latent heat of fibers with different amounts of paraffin injections, and an infrared thermal imager was used to monitor the skin–core composite intelligent temperature-adjusting fiber bundles and ordinary polypropylene fiber bundles under the same heating and cooling conditions. The temperature of the fiber bundle was considered to be a function of time. The results showed that with the increase in the amount of the paraffin injections, the proportion of the paraffin component in the fiber and the latent heat of the fiber phase transition also increased. When the paraffin injection amount was 1.5 mL/min, the melting enthalpy and the crystallization enthalpy reached 65.93 J/g and 66.15 J/g, respectively. Under the same conditions, the heating speed of the intelligent temperature-adjusting fiber bundle was found to be slower than that of the ordinary polypropylene fibers, and the maximum temperature difference between the two reached 8.0 °C. Further, the cooling speed of the former was also observed to be slower than that of the latter, and the maximum temperature difference between the two reached 6.7 °C.

18 September 2025 in Polymers
Verified
Journal Article
Open access
PDF file
XXXinkang Xu
Xinkang Xu
PFPei Feng
Pei Feng
ZHZexu Hu
Zexu Hu
JWJiazheng Wang
Jiazheng Wang
QXQianchun Xu
Qianchun Xu
CYChongchang Yang
Chongchang Yang
PBT/PET side-by-side bicomponent fibers form helical crimp structures under thermal or mechanical stress, though the mechanism behind mechanically induced crimping remains unclear. In this study, four-lobed cross-sectional PBT/PET side-by-side bicomponent fibers were produced and subjected to drawing from 1.6 to 4.0 times at 80 °C to induce crimping. Increasing draw ratios significantly enhanced fiber tenacity (from 0.64 to 3.91 cN/dtex) and reduced crimp radius (from 2.05 mm to 0.64 mm). A predictive crimp curvature model integrating Denton’s crimp theory and a four-element viscoelastic model was established, with corrected results achieving an R2 of 0.9951. Additionally, four-lobed fibers showed better wettability, with a static contact angle 3.56° lower than that of circular fibers. This work provides theoretical guidance for high-performance self-crimping fiber design.

30 June 2018 in Fibres & Textiles in Eastern Europe
Verified
Journal Article
Closed access
PFPei Feng
Pei Feng
JPJun Pan
Jun Pan
QMQihua Ma
Qihua Ma
CYChongchang Yang
Chongchang Yang

23 August 2024 in Polymers
Verified
Journal Article
Open access
PDF file
XLXiangqian Liu
Xiangqian Liu
PFPei Feng
Pei Feng
CYChongchang Yang
Chongchang Yang
ZHZexu Hu
Zexu Hu
In response to an investigation on the paths of changes in the crystallization and radial differences during the forming process of nascent fibers, in this study, we conducted numerical simulation and analyzed the changes in crystallization mechanical parameters and tensile properties through a fluid dynamics two-phase model. The model was based on the melt-spinning method focusing on melt spinning, the environment of POLYFLOW, and the method of joint simulation, coupled with Nakamura crystallization kinetics, including the development of process collaborative parameters, stretch-induced crystallization, viscoelasticity, filament cooling, gravity term, inertia, and air resistance. Finally, for nylon 6 BHS and CN9987 resin spinning, the model successfully predicted the distribution changes in temperature, velocity, strain rate tensor, birefringence, and stress tensor along the axial and radial fibers and obtained the variation pattern of fibers’ crystallinity along the entire spinning process under different stretching rates. Furthermore, we also explored the effects of spinning conditions, including inlet flow rate, winding speeds, and the extrusion temperature, on the fibers’ crystallization process and obtained the influence rules of different spinning conditions on fiber crystallization. Knowing the paths of changes in mechanical performance can provide important guidance and optimization strategies for the future industrial preparation of high-performance fibers.

1 December 2016 in Manufacturing Technology
Verified
Journal Article
Open access
PDF file
ZCZhang Chunyan
Zhang Chunyan
CYChongchang Yang
Chongchang Yang
ZRZhang Ronggen
Zhang Ronggen
An emulation study of the drilling by the spade drill on the spinneret micro-hole is conducted by using FEM analysis software Deform-3D. According to application of finite element software Deform-3D, some characteristic parameter of the work p...