Pei Feng

Dr. Pei Feng

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 June 2022 in Textile Research Journal
Verified
Journal Article
Closed access
RZRonggen Zhang
Ronggen Zhang
PFPei Feng
Pei Feng
CYChongchang Yang
Chongchang Yang
During the processing of covered yarn, the stability of the tension of the yarn unwinding from the package directly affects the quality of the covered yarn. In this work, a mathematical model of the yarn unwinding balloon was established, and the influence of Coriolis force and air resistance on the balloon was considered. Further, the balloon shape of the yarn at different unwinding linear speeds was studied. An experimental observation platform for the yarn balloon morphology was built. The comparative analysis of the balloon shape obtained using the experimental observation and the theoretical research results showed that the mathematical model of the yarn unwinding balloon is correct. The phenomenon of scratching the upper edge of the package during the unwinding of spandex should be avoided. Finally, in order to maximize the diameter of the spandex package, the taper of the core yarn bobbin and the minimum yarn guide distance was determined based on the guidance of the theoretical simulations and experimental analysis. The research results provide a design base for the layout and structural dimensions of the follow-up elastic fiber passive precision tension control device.

13 January 2024 in Polymers
Verified
Journal Article
Open access
PDF file
SHShiqun He
Shiqun He
XXXinkang Xu
Xinkang Xu
PFPei Feng
Pei Feng
CYChongchang Yang
Chongchang Yang
SWShengze Wang
Shengze Wang
Multi-leaf hollow-profiled fiber is a complex-shaped fiber with a hollow structure with at least three leaves arranged outside. In this work, spinning processes for the preparation of multi-leaf hollow-profiled fiber with complex cross-section patterns were proposed. Initially, the characteristics and preparation methods of multi-leaf hollow-profiled fibers were analyzed, and the key technologies for their preparation were studied. Further, micro-hole spinnerets were designed, and the numerical simulations of melt flow in the spinning channel were performed. Then, the preparation of six-leaf hollow profiled fibers was carried out to study the formation of the cross-sections. Finally, as an extension and application, an experimental verification of the melt spinning parameters’ effects on eight-leaf hollow fiber preparation was conducted. From the results of the spinning experiments, it was found that when the volume flow rate of a single hole increased from 2.33 × 10−8 m3/s to 3.33 × 10−8 m3/s, the profile degree of the spun fiber increased from 30.93% to a maximum value of 40.99%. Furthermore, when the cooling speed increased from 0.6 m/s to 1 m/s, the profile degree increased from 29.56% to 41.63%. When the initial blowing height increased from 80 mm to 140 mm, the profile degree decreased from 40.99% to 27.13%. When the spinning temperature increased from 285 °C to 290 °C, the profile degree decreased from 40.99% to 38.56%. However, the winding speed had an insignificant effect on the cross-sectional shape of the spun fibers. Moreover, the spun fibers showed good performance and a natural three-dimensional crimp function.

10 October 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
JLJie Li
Jie Li
XZXunxun Zhang
Xunxun Zhang
PFPei Feng
Pei Feng
The number of end-of-life mobile phones is increasing every year, which includes parts that have high reuse values and various dangerous and toxic compounds. An intellectualized and automatic upgrade of the disassembly process of the end-of-life mobile phones would enhance the recycling value as well as efficiency. It would reduce the pollution in the environment. The detection of end-of-life mobile phone parts plays a critical role in automatic disassembly and recycling. This study offers an image processing-based approach for identifying important parts of mobile phones that are nearing the end of their useful lives. An image enhancement approach has been utilized for generating disassembly datasets of end-of-life mobile phones from several brands and models, and different retirement states. The YOLOv5m detection model is applied to train as well as validate the detection model on the customized datasets. According to the results, the proposed approach allows the intelligent detection of battery, camera, mainboard and screw. In the validation set, the Precision, Recall and mAP@.5 are 99.4%, 98.4% and 99.3%, respectively. Additionally, several path planning algorithms are utilized for the disassembly plan of screws which indicates that the genetic algorithm’s use increases the efficiency of disassembly.

27 January 2023 in Textile Research Journal
Verified
Journal Article
Closed access
HYHaiyan Yu
Haiyan Yu
JZJunping Zhang
Junping Zhang
SHShiqun He
Shiqun He
PFPei Feng
Pei Feng
CYChongchang Yang
Chongchang Yang
High-speed ring spinning is limited by issues such as yarn quality and yarn breakage, and the spinning tension significantly affects yarn breakage and winding speed. The shape of the balloon in ring spinning is closely related to the distribution of tension within the yarn. In this study, a force analysis of the balloon yarn was conducted focusing on the balloon section during ring spinning, and a mathematical model of the balloon was established. The model included factors such as the centrifugal force, Coriolis force, and the air resistance of the yarn. Suitable parameters were then selected to extract the balloon trajectory curve and compare it with simulations to validate the model. The model was used to analyze the effects of balloon speed, yarn linear density, balloon bottom radius, balloon height, and yarn tension at the top of the balloon on the yarn tension at the bottom of the balloon, and the overall shape of the balloon. The balloon model established in this study could also be used for the study of balloon yarn tension in other processes. The effects of the main parameters influencing the yarn tension of the multi-balloon can provide a theoretical reference for enhancing the design of high-speed ring spinning.

20 April 2022 in Polymers
Verified
Journal Article
Open access
PDF file
RZRonggen Zhang
Ronggen Zhang
PFPei Feng
Pei Feng
CYChongchang Yang
Chongchang Yang
In this work, a skin–core composite intelligent temperature-adjusting fiber was prepared using the composite melt spinning method, with polypropylene as the skin layer and T28-type paraffin as the core layer, in order to obtain clothing fibers with a bidirectional temperature adjustment function. A differential scanning calorimeter was used to test the phase-change latent heat of fibers with different amounts of paraffin injections, and an infrared thermal imager was used to monitor the skin–core composite intelligent temperature-adjusting fiber bundles and ordinary polypropylene fiber bundles under the same heating and cooling conditions. The temperature of the fiber bundle was considered to be a function of time. The results showed that with the increase in the amount of the paraffin injections, the proportion of the paraffin component in the fiber and the latent heat of the fiber phase transition also increased. When the paraffin injection amount was 1.5 mL/min, the melting enthalpy and the crystallization enthalpy reached 65.93 J/g and 66.15 J/g, respectively. Under the same conditions, the heating speed of the intelligent temperature-adjusting fiber bundle was found to be slower than that of the ordinary polypropylene fibers, and the maximum temperature difference between the two reached 8.0 °C. Further, the cooling speed of the former was also observed to be slower than that of the latter, and the maximum temperature difference between the two reached 6.7 °C.

18 September 2025 in Polymers
Verified
Journal Article
Open access
PDF file
XXXinkang Xu
Xinkang Xu
PFPei Feng
Pei Feng
ZHZexu Hu
Zexu Hu
JWJiazheng Wang
Jiazheng Wang
QXQianchun Xu
Qianchun Xu
CYChongchang Yang
Chongchang Yang
PBT/PET side-by-side bicomponent fibers form helical crimp structures under thermal or mechanical stress, though the mechanism behind mechanically induced crimping remains unclear. In this study, four-lobed cross-sectional PBT/PET side-by-side bicomponent fibers were produced and subjected to drawing from 1.6 to 4.0 times at 80 °C to induce crimping. Increasing draw ratios significantly enhanced fiber tenacity (from 0.64 to 3.91 cN/dtex) and reduced crimp radius (from 2.05 mm to 0.64 mm). A predictive crimp curvature model integrating Denton’s crimp theory and a four-element viscoelastic model was established, with corrected results achieving an R2 of 0.9951. Additionally, four-lobed fibers showed better wettability, with a static contact angle 3.56° lower than that of circular fibers. This work provides theoretical guidance for high-performance self-crimping fiber design.