Xinkang Xu

Dr. Xinkang Xu


Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 January 2024 in Polymers
Verified
Journal Article
Open access
PDF file
SHShiqun He
Shiqun He
XXXinkang Xu
Xinkang Xu
PFPei Feng
Pei Feng
CYChongchang Yang
Chongchang Yang
SWShengze Wang
Shengze Wang
Multi-leaf hollow-profiled fiber is a complex-shaped fiber with a hollow structure with at least three leaves arranged outside. In this work, spinning processes for the preparation of multi-leaf hollow-profiled fiber with complex cross-section patterns were proposed. Initially, the characteristics and preparation methods of multi-leaf hollow-profiled fibers were analyzed, and the key technologies for their preparation were studied. Further, micro-hole spinnerets were designed, and the numerical simulations of melt flow in the spinning channel were performed. Then, the preparation of six-leaf hollow profiled fibers was carried out to study the formation of the cross-sections. Finally, as an extension and application, an experimental verification of the melt spinning parameters’ effects on eight-leaf hollow fiber preparation was conducted. From the results of the spinning experiments, it was found that when the volume flow rate of a single hole increased from 2.33 × 10−8 m3/s to 3.33 × 10−8 m3/s, the profile degree of the spun fiber increased from 30.93% to a maximum value of 40.99%. Furthermore, when the cooling speed increased from 0.6 m/s to 1 m/s, the profile degree increased from 29.56% to 41.63%. When the initial blowing height increased from 80 mm to 140 mm, the profile degree decreased from 40.99% to 27.13%. When the spinning temperature increased from 285 °C to 290 °C, the profile degree decreased from 40.99% to 38.56%. However, the winding speed had an insignificant effect on the cross-sectional shape of the spun fibers. Moreover, the spun fibers showed good performance and a natural three-dimensional crimp function.

18 September 2025 in Polymers
Verified
Journal Article
Open access
PDF file
XXXinkang Xu
Xinkang Xu
PFPei Feng
Pei Feng
ZHZexu Hu
Zexu Hu
JWJiazheng Wang
Jiazheng Wang
QXQianchun Xu
Qianchun Xu
CYChongchang Yang
Chongchang Yang
PBT/PET side-by-side bicomponent fibers form helical crimp structures under thermal or mechanical stress, though the mechanism behind mechanically induced crimping remains unclear. In this study, four-lobed cross-sectional PBT/PET side-by-side bicomponent fibers were produced and subjected to drawing from 1.6 to 4.0 times at 80 °C to induce crimping. Increasing draw ratios significantly enhanced fiber tenacity (from 0.64 to 3.91 cN/dtex) and reduced crimp radius (from 2.05 mm to 0.64 mm). A predictive crimp curvature model integrating Denton’s crimp theory and a four-element viscoelastic model was established, with corrected results achieving an R2 of 0.9951. Additionally, four-lobed fibers showed better wettability, with a static contact angle 3.56° lower than that of circular fibers. This work provides theoretical guidance for high-performance self-crimping fiber design.