A MIL-53(Fe) analogue was successfully synthesized by a HF free-solvothermal method. The sample was characterized by XRD, N2 adsorption (BET), TEM, FTIR, XPS and AAS. From the N2 adsorption–desorption isotherms, it can be seen that the structure of MIL-53(Fe) in the anhydrous form exhibits closed pores with almost no accessible porosity to nitrogen gas. The XPS results reveal that Fe is really incorporated into the MIL-53(Fe) framework. In the hydrated form, the pores of MIL-53(Fe) are filled with water molecules. Thus, MIL-53(Fe) exhibited a very high adsorption capacity of As(V) in aqueous solution (Qmax of 21.27 mg g−1). Adsorption kinetics data revealed that As(V) adsorption isotherms fit the Langmuir model and obey the pseudo-second-order kinetic equation.
This article presents a crystal chemical analysis, generalization, and systematization of structural characteristics of metal-organic polymers MIL-53(M3+) with M = Al, Cr, Ga, and Fe. The division of the MIL-53(M3+) structures into a morphotropic series was performed, which made it possible to predict the formation of new compounds or solid solutions with the corresponding composition and structure. The change in the symmetry of MIL-53(M3+) and the causes of polymorphs formation are explained on the basis of crystal chemical rules. The efficiency of the revealed regularities in the structural characteristics of the MIL-53(M3+) phases were experimentally confirmed for MIL-53(Fe) and composite MIL-53(Fe)/GO (GO-graphene oxide) by several methods (powder X-ray, X-ray absorption, and photoelectron spectroscopy). For the first time, different coordination numbers (CN) (CNFe = 4.9 for MIL-53(Fe)—two types of coordination polyhedra with CNFe = 6 and CNFe = 4; CNFe = 4 for MIL-53 (Fe3+)/GO) and the formal charges (FC) of iron ions (variable FC of Fe (2+δ)+ in MIL-53(Fe3+) and Fe2+ in MIL-53(Fe3+)/GO) were found. These experimental data explain the higher photocatalytic activity of MIL-53(Fe3+)/GO in photo-Fenton reactions—RR195 decomposition.
The composite of Fe‐MIL‐53 and graphene oxide (GO) was successfully prepared using solvothermal method to crystallize Fe‐MIL‐53 on GO layers. The Fe‐MIL‐53/GO composite was characterized by XRD, isotherms of N2 adsorption– desorption (BET), TEM, FTIR, and Energy dispersive X‐Ray (EDX). From TEM result, it revealed the formation of very small Fe‐MIL‐53 particles of 10 ‐20 nm well dispersed on GO surface. The photocatalytic activity of Fe‐MIL‐53/GO nanocomposite for the degradation of reactive dye (reactive red‐RR195) in aqueous solution was examined and evaluate. The red‐RR195 removal efficiency reached 96 % after 60 min of reaction under irradiation of simulated sunlight, indicating highly photocatalytic activity of this nano composite. In addition, this composite also showed much higher photocatalytic activity as compared to that of pure Fe‐MIL‐53, this clearly indicated the synergistic effect between Fe‐MIL‐53 and GO. Therefore, the novel Fe‐MIL‐53/GO can be considered as a highly efficient photocatalyst for degradation of reactive dye from aqueous solution.