Among the different types of photonic sensor devices, optical whispering gallery mode resonators (WGMRs) have attracted interest due to their high level of sensitivity, small size, and ability to perform real-time temperature measurements. Here we demonstrate the applicability of temperature measurements using WGMR in both air and liquid environments. We also show that WGMR allowed measurements of the refractive index variations in an evaporating glucose–water solution droplet. The thermal tuning of WGMR can be reduced by coating WGMRs with a thin layer of polymethyl methacrylate (PMMA). Dip-coating the silica microsphere multiple times significantly reduced the resonance shift, partially compensating for the positive thermo-optical coefficient of silica. The shift direction changed the sign eventually.

We demonstrate a highly sensitive whispering gallery mode (WGM) relative humidity (RH) sensor based on a glycerol microdroplet. WGMs were excited using a 760 nm tunable semiconductor laser. We used free space coupling, which is effective when using a liquid resonator. A detailed analysis of different parameters influencing the sensor’s characteristics (sensitivity, hysteresis, resolution, stability, and temperature) is presented. The sensitivity of the sensor is one of the highest reported (2.85 nm/% RH in the range 50–70% RH with the resolution 1 × 10⁻⁴% RH). This type of humidity sensor has several advantages, such as high sensitivity, extended lifetime, good repeatability, and low cost, as well as the use of a non-toxic and environmentally friendly liquid.

We experimentally demonstrate Kerr optical frequency combs (OFCs) with mode spacing of 1, 2, 3, 5, 6, and 8 free spectral ranges (FSRs) corresponding to 0.4, 0.8, 1.2, 2, 2.4, and 3.2 THz, respectively, in silica microspheres pumped by CW C-band lasers in the anomalous dispersion range. Experimental realizations are based on using standard telecom equipment and components such as SMF-28e fiber for producing microspheres and fiber tapers for pump coupling and OFC outcoupling. Numerical simulation is performed to support the experimental results and explain the observed spectral asymmetry in OFCs by the influence of the 3rd-order dispersion.

Kerr optical frequency combs (OFCs) based on silica microsphere whispering gallery mode resonator (WGMR) have various applications where they are used as a light source. For telecommunication purposes, WGMR-based Kerr-OFC comb generators can be physically realized using silica microsphere resonators and can be used to replace multiple laser arrays. In such a realization, these novel light sources have the potential to demonstrate an attractive solution for intra-datacenter interconnects (DCI). In this paper, we show an experimental demonstration of a silica microsphere WGMR-based Kerr OFC light source where newly generated 400 GHz spaced carriers together with powerful linear equalization techniques, such as a linear symbol-spaced adaptive decision-feedback equalizer (DFE) with feed-forward (FF) and feedback (FB) taps, provide an alternative to individual lasers ensuring low-cost and low-complexity IM/DD scheme for the transmission of NRZ-OOK modulated signals at data rates up to 50 Gbps/λ over 2 km SMF link. Finally, we demonstrate a record 50 Gbps per λ transmission of NRZ-OOK modulated signals with a novel silica microsphere WGMR-based Kerr-OFC as a light source operating in the optical C-band, surpassing the previously demonstrated data rate record by five times.

We demonstrate a wavelength sensor based on whispering gallery mode (WGM) resonators. For the first time, multiple polymethyl methacrylate (PMMA) microspheres were simultaneously attached to a tapered fiber. WGM resonances from these commercially available PMMA microspheres were observed with a NIR camera, monitoring the scattered light. Circulating light in the WGMs was scattered on the outer layer of the microspheres and appeared as bright spots due to scattering defects. For each laser wavelength fed into the tapered fiber, the light interfered differently for the various sizes of PMMA microspheres. We measured scattered light intensity for different wavelengths and created a barcode for each microsphere. Combining these barcodes into a mode map allowed for unknown wavelength detection. A tunable laser around 1550 nm was used for measurements. As a result, a laser wavelength sensor system with a detection limit of 5 pm was demonstrated. The principles of increasing selectivity, as well as creating a compact device, were discussed.

Quantum dots can modify the properties of the whispering gallery mode resonators (WGMRs) used in various potential applications. A deposition of a suitable nanomaterial for the surface functionalization of WGMRs allows for the achievement of high quality (Q) factors. Here, we show that the WGMR surface can be functionalized using quantum dots. We demonstrate that WGMRs covered with thin layers of HgS and PbS quantum dots are suitable for third-harmonic generation due to the high Q factor of the developed microresonators, thus significantly lowering the pumping power required for nonlinear optical interactions.