TiO2 exists naturally in three crystalline forms: Anatase, rutile, brookite, and TiO2 (B). These polymorphs exhibit different properties and consequently different photocatalytic performances. This paper aims to clarify the differences between titanium dioxide polymorphs, and the differences in homophase, biphase, and triphase properties in various photocatalytic applications. However, homophase TiO2 has various disadvantages such as high recombination rates and low adsorption capacity. Meanwhile, TiO2 heterophase can effectively stimulate electron transfer from one phase to another causing superior photocatalytic performance. Various studies have reported the biphase of polymorph TiO2 such as anatase/rutile, anatase/brookite, rutile/brookite, and anatase/TiO2 (B). In addition, this paper also presents the triphase of the TiO2 polymorph. This review is mainly focused on information regarding the heterophase of the TiO2 polymorph, fabrication of heterophase synthesis, and its application as a photocatalyst.
1 August 2018 in Journal of Physics: Conference Series
Using lithium-ion batteries has emerged as a viable approach to lessen the negative effects of fossil fuel use. LiFePO4 (LFP) is one of the lithium-ion batteries that are eco-friendly and safer than others. However, LFP has a main limitation with the poor rate performance due to its low electronic conductivity number. This study aims to present a bibliometric review of the analysis using VOSviewer of surface modification using carbon coating of metal-organic frameworks (MOFs) to improve the challenge of synthesis, structure, electrochemical stability, and performance of LFP. The results of this study showed that surface modification of LiFePO4 electrodes using carbon compounds produced from MOFs improved the efficiency of electrochemical energy storage and conversion technologies. High levels of porosity and customizable characteristics are offered by metal-organic frameworks (MOFs) ideal for surface modification which improves the battery conductivity. The bibliometric analysis showed that research on lithium-ion batteries is currently receiving attention, a sign of its significance and rising popularity. It is suggested for researchers especially Indonesian researchers to contribute more to this field.
18 August 2011 in Polymers for Advanced Technologies
We have calculated 2D photonic crystal band gap using plane-wave expansion method. The studied model of structures is hexagonal lattice and square lattice of rod cylinder in air. We have simulated the dispersion relation of it structure using hybrid polymer as rod material. The parameter structures are nrod = 1.5, nhole = 1, and rrod = 0.25a, where a is lattice constant. We found the distributed feedback occurs at the edge of upper band or frequency at 0.66 (a/λ). In our experimental work, we have successfully fabricated the 2D photonic crystal from hybrid polymer incorporated with organic dye laser. The lasing characteristics ware investigated using strip-line excitation light of SHG Nd-YAG laser (λ=532 nm). The lasing wavelengths for hexagonal structure are observed at 606 nm and 621 nm for photonic crystal period of 400 nm and 410 nm, respectively. λ=532 nm). Whereas the square structure, the lasing wavelengths are observed at (588 nm ± 2) and (606 nm ± 2 nm) for grating period of 391 nm and 405 nm.
1 January 2024 in International Journal of Engineering
This study presents an evaluation of the conductivity of in-situ synthesis of LiFePO4/C-MAF-5 through the use of Response Surface Methodology (RSM) in optimizing process parameters.. Performance and optimization were established by combining RSM with the experimental carbonation process, crystallographic analysis using X-ray diffraction (XRD), and Fourier infrared spectroscopy (FT-IR). The results revealed that crystal structure is important in determining electrical properties, with conductivity consistently higher at smaller sample sizes. Furthermore, the main focus is provided on how the lattice parameters and electrical conductivity of LiFePO4 are affected by particle size. The higher electrical conductivity is due to the smaller particles, where reduced lattice strain is indicated. Furthermore, the success of the synthesis process was confirmed by the absorption peaks that corresponded to the expected LiFePO4 features and corresponded to specific vibrational methods as presented in the FT-IR spectrum results. The complex relationship between conductivity, LiFePO4 amount, and imidazole concentration is demonstrated by the RSM contour plot. It was found that the optimal LFP concentration was 4 mol, the ideal Imidazole concentration was 58.79 mol, and the optimal temperature was set at 700 °C. Under these recommended operating conditions, the resulting conductivity was determined to be 0.0000592 S cm-1.