The beetroot peels can be a sustainable source of betalains that can dye the wool materials through green processes based on low water and energy consumption. Green chemistry in the extraction of betalains from colored food waste/peels from red beetroot involved the use of water as a solvent, without other additives. In order for the extract obtained to be able to dye the wool, it was necessary to functionalize betalains or even the wool. Three types of sustainable functionalizations were performed, with (1) acetic acid; (2) ethanol; and (3) arginine. For each functionalization, the mechanism that can justify dyeing the wool in intense colors was elucidated. The characterization of the extract was performed with the data provided by UV-VIS and HPLC-MS analyses. The characterization of the wool dyed with the extract obtained from the red beetroot peels was possible due to the information resulting from the FTIR and CIELab analyses. The functionalizations of betalains and wool in acid environments lead to the most intense red colors. The color varies depending on the pH and the concentration of betalains.

A new possible method to produce a transdermal patch is proposed in this paper. The study refers to the pulsed laser deposition method (PLD) applied on turmeric target in order to obtain thin layers. Under high power laser irradiation of 532 nm wavelength, thin films containing curcuminoids were obtained on different substrates such as glass and quartz (laboratory investigation) and hemp fabric (practical application). Compared FTIR, SEM-EDS and LIF analyses proved that the obtained thin film chemical composition is mainly demethoxycurcumin and bisdemethoxycurcumin which is evidence that most of the curcumin from turmeric has been demethixylated during laser ablation. Silanol groups with known role into dermal reconstruction are evidenced in both turmeric target and curcuminoid thin films. UV–VIS reflection spectra show the same characteristics for all the curcuminoid thin films, indicating that the method is reproducible. The method proves to be successful for producing a composite material, namely curcuminoid transdermal patch with silanol groups, using directly turmeric as target in the thin film deposited by pulsed laser technique. Double layered patch curcuminoid—silver was produced under this study, proving compatibility between the two deposited layers. The silver layer added on curcuminoid-silanol layer aimed to increase antiseptic properties to the transdermal patch.

Beta vulgaris L. is a biennial plant easily accessible all over the world, rich in various biologically active compounds, especially a class of extremely bioactive pigments known as betalains. These dyes predominate in the pulp and peels of beetroot, which is why they can be valorized in food, medicine or in the textile industry. In this work, betalains extractions were carried out applying 3 sustainable options: (1) dissolving/solubilizing betalains in water; (2) extraction under pressure; (3) extraction assisted by an enzyme/pectinase. The obtained extracts were analyzed in the UV-Vis domain, which allowed their characterization by determining the total monomeric anthocyanins, color density (control), polymeric density and browning index. The HPLC-MS analysis highlighted the extracts composition. The colors characteristics were determined through CIELab measurements. The performances of these 3 extracts, during green dyeing (without mordants), were evaluated according to the color characteristics (L*, a*, b* and K/S) of the dyed wool samples under different conditions: pH, temperature, duration of dyeing and volume of extract and stabilizers (Vitamin E and EDTA). Betalains can be considered acid dyes, with a low affinity for wool, which in a pronounced acidic environment dye the wool in an intense, uniform way and with good resistance to washing and rubbing.

The development of intelligent materials for protective equipment applications is still growing, with enormous potential to improve the safety of personnel functioning in specialized professions, such as firefighters. The design and production of such materials by the chemical modification of biodegradable semisynthetic polymers, accompanied by modern manufacturing techniques such as electrospinning, which may increase specific properties of the targeted material, continue to attract the interest of researchers. Phosphorus-modified poly(vinyl alcohol)s have been, thus, synthesized and utilized to prepare environmentally friendly electrospun mats. Poly(vinyl alcohol)s of three different molecular weights and degrees of hydrolysis were phosphorylated by polycondensation reaction in solution in the presence of phenyl dichlorophosphate in order to enhance their flame resistance and thermal stability. The thermal behavior and the flame resistance of the resulting phosphorus-modified poly(vinyl alcohol) products were investigated by thermogravimetric analysis and by cone calorimetry at a micro scale. Based on the as-synthesized phosphorus-modified poly(vinyl alcohol)s, electrospun mats were successfully fabricated by the electrospinning process. Rheology studies were performed to establish the optimal conditions of the electrospinning process, and scanning electron microscopy investigations were undertaken to observe the morphology of the phosphorus-modified poly(vinyl alcohol) electrospun mats.