This paper presents research related to the tubular combustion chamber of an expendable turbojet. Although annular combustors are dominant at present, tubular combustors are still attractive because they are simpler to produce and require lower amounts of air flow for testing. The objective of this research was to assess the combustor’s primary zone configuration, and four configurations were tested to obtain experimental answers for use in future work. The configuration of the combustion chamber is a simple and classic design in line with its expendable purpose. The test methodology was to perform initial testing of the primary and secondary zones under atmospheric conditions using the four configurations, and then to subsequently complete the combustor using the best configuration. The complete combustor was then tested under both atmospheric conditions and working conditions. The results showed that the stability margin was wide enough to cover the combustor’s entire working area. The measured efficiency and pressure drop were in very good agreement with the corresponding designed values. The design and testing methodology proposed here could be used for similar scientific and engineering research applications.
Non-movable threaded joints (bolted connections) and movable threaded joints (power screws) are subassemblies that have a large field of application in the mechanical industry. With these subassemblies, a part of the input energy in the form of torque is spent on overcoming friction on the contact sliding surfaces. These energy losses mostly depend on the geometric and tribological characteristics of the threaded joint. Compared to bolted joints, power screws consume significantly more energy to perform their elementary function. Bolted joints have a much larger field of application in the mechanical industry. In the case of bolted joints metric thread is the most common, and in power screws, threaded joints with a trapezoidal thread. Accordingly, this paper analyses the effects of the coefficient of friction and geometric and kinematic parameters on the energy efficiency of trapezoidal and metric threaded joints. The performed analysis can be used to select the optimal parameters of the threaded joints from the aspect of energy efficiency during the design of new or reconstruction of existing machine structures.