This paper presents a 5.8GHz digitally controlled DSRC receiver for Chinese electronic toll collection system. All RF, IF blocks and digital baseband for on-chip automatic gain control, are integrated on an RF-SoC. The proposed digitally controlled LNA and mixer circuits are elaborated. The test chip was realized in a 0.13µm CMOS technology. The RF blocks in receiver occupy a chip area of 0.75mm². The receiver blocks consume 22mA under a 1.5V supply voltage. Measurement results show that the bit error rate maintains better than 10¯⁶, while the input power level varies from -75dBm to -8dBm. This design results in a receiver sensitivity improvement of at least 25%, and a dynamic range enhancement of at least 12%.
We propose an all circular-air-hole short-length polarization beam splitter (PBS) with high extinction ratio based on dual-core highly birefringent photonic crystal fiber (PCF). The impacts of geometrical parameters on the coupling polarization dependence, coupling length ratio (CLR), and propagation property are numerically investigated by the full-vector finite element method (FEM) and the semi-vector beam propagation method (BPM). From simulation results, it is seen that CLRs at the excitation wavelength of 1.55 µm can be optimized to be closed to the desired values of 3/2 and 4/3 to satisfy the sufficient condition of splitting polarized modes by appropriately tailoring the air-hole sizes. For the two optimal structures, the separation of x-and y-polarized modes can be achieved in short lengths of 1.41 mm and 2.89 mm at the operating wavelength of 1.55 µm, respectively. Furthermore, the extinction ratios at λ = 1.55 µm are estimated to be 97.7 dB and 88.1 dB, and the wavelength bandwidths of extinction ratio better than 15 dB are about 107 and 82 nm, respectively.
13 December 2018 in IOP Conference Series: Materials Science and Engineering
This paper presents an advanced architecture for programmable multi-modulus dividers (MMD) for high-speed and low-power synthesizers application in UMC 55nm CMOS technology. The proposed architecture used cascaded divide by divide-by-2/3. According to the design requirements, our MMD consists of 5 stages of the divide-by-2/3 dual-modulus dividers. The division ratio is ranged from 32 to 69 continually with the step of 1. Measurement results indicated a maximum operating frequency is 15GHz with 167 uW power consumption from a 1.2V supply voltage and occupied 50* 14 um2.
With the development of the Internet, in the home, medical, transportation and other aspects of the Internet of Things large-scale application, more and more IoT gateways are connected to the cloud. Users interact with the Internet of Things gateway through the Internet of Things web server. The traditional Internet of Things web server communication...