Additive manufacturing (AM) is emerging as a key technology for the minimization and integration of microwave antenna systems. Among the several AM processes, selective laser melting (SLM) is rather convenient for waveguide components, since it allows for all-metal parts with a mechanical accuracy within 30-60 μm and an equivalent surface electrical resistivity in the range of 10-20 μΩcm. This paper reports on the assessment of the SLM applicability to the manufacturing of dual-polarization waveguide components operating in Ka-band, namely, a septum polarizer, a smooth-wall feed horn integrated with the septum polarizer, and an orthomode transducer (OMT). In order to achieve high electromagnetic performance in the Kaband, the architectures have been optimized for the manufacturing process, above all in terms of orientation on the building platform and minimization of supporting structures. As a consequence, the corresponding prototypes exhibit measured performances in significant agreement with the predicted values. As an example, the return loss of all the components has been measured to be as high as 25 dB, while the measured isolation between the rectangular waveguide ports of the OMT is better than 47 dB.
8 March 2018 in IEEE Transactions on Microwave Theory and Techniques
Additive manufacturing technologies have been increasingly applied to the development of radio frequency components in the past few years. Indeed, the free-form capability of these processes allows for the design of novel components, whose actual implementation through conventional machining is rather complex or even not possible. This paper describes a monolithic WR51 component integrating three radio frequency functionalities, namely, bending, twisting, and filtering. Three aluminum prototypes with different bending/twisting radii have been manufactured through the selective laser melting process. They exhibit a measured rejection higher than 60 dB in 17.5 and 21.2 GHz, and a measured return loss better than 20 dB in 12.5 and 15 GHz. Significant mass and envelope reductions (higher than 60% depending on the bending/twisting radius) with respect to the reference subsystem with distinct waveguide components are achieved. These results assess the effectiveness of 3-D metal printing in the miniaturization and integration of waveguide systems.
3D-printing is leading to a major transformation in many industrial and application sectors, ranging from medical to aerospace. In the space sector, 3D-printing has firstly been adopted for the development of structural and thermal parts, such as brackets and heat pipes. In more recent years, thanks to improvements in precision and surface roughness, 3D-printing technologies have steadily been investigated also for the development of radio frequency components and advanced payloads. Indeed, the unique features of 3D-printing, including the free-form capability and the ease for customization, make these manufacturing technologies very appealing in the development of complex radio-frequency front-ends for space applications, including New Space constellations and next generation software-defined communication satellites. They also enable a drastic simplification of mechanical designs by reducing the number of interfaces and assembling screws of large radio-frequency front-ends, thus leading to significant mass savings and higher integration. This paper briefly reports on recent advances in 3D-printing that have been carried out according to the current trends in radio-frequency front-ends for satellite communications.
25 July 2018 in IEEE Antennas and Wireless Propagation Letters
In this letter, the design and the three-dimensional (3-D) printing of high-performance feed horns operating within Ku- and V-bands are presented. A smooth-wall architecture has been preferred in order to ease the manufacturing and to enhance the 3-D printing quality. A suitable design procedure has been developed for the synthesis of dual-band smooth-wall feeds. Single-band and dual-band all-metal prototypes have been manufactured through the selective laser melting technology. A remarkable agreement between the predicted and measured performances has been achieved also for the higher frequency Q/V-band feed horn with measured return-loss higher than 33 dB, cross-polarization lower than −28 dB, and peak gain of 25 dBi.
16 March 2018 in IEEE Transactions on Antennas and Propagation
Front-end amplifiers with high input impedance are exploited to build active array elements for modern low-frequency radio telescopes. The combination of such loading and mutual coupling between adjacent elements is responsible for the deep nulls that are present in some Embedded Element Patterns (EEPs) of the Low Frequency Array (LOFAR). This paper quantifies this phenomenon with both models and experimental data. The full-wave array simulations and the measured amplifier scattering parameters are combined to obtain the EEP models. These models are in good agreement with the in-situ measurements that have been performed with a micro Unmanned Aerial Vehicle (UAV) carrying a field source.
9 May 2022 in IEEE Open Journal of Antennas and Propagation
A horizontal planar scanner with an approximate size of 40 m $\times40$ m has been implemented using the Unmanned Aerial Vehicle (UAV) technology. The UAV is not wired to the ground to maintain the flexibility and short setup time of a non-tethered flight. In this configuration, the UAV-mounted continuous-wave source is not phase-locked to the on-the-ground receiver. A dual-polarized reference antenna placed on the ground is hence used to retrieve the relevant phase information. The presented approach has been applied on the Pre - Aperture Array Verification System (Pre -AAVS1) of the Square Kilometre Array, which is a digital beamformed array with 16 active elements. An inverse source technique has been applied on measured Near-Field (NF) data acquired on two different sets of points (one for each electric field component) from all the receiver channels. In this way, Embedded Element Patterns (EEPs), array calibration coefficients and pattern have been determined from NF data only. The achieved results have been validated using a complementary set of Far-Field (FF) measurements and simulations.