Lithium‐ion batteries (LIBs) have transformed the use of mobile electronics and storage technologies. Alongside advances in materials, an in‐depth understanding of the interfacial phenomena and interphase formation mechanisms in LIBs is crucial. Interphases are widely recognized as the most important and the least understood components of LIBs and play a direct role in defining cell performance, cyclability, and safety. This article presents a review of recent developments in vibrational spectroscopy techniques of Raman, infrared, and sum‐frequency generation spectroscopies to probe the fundamental aspects of interphases on the anode and cathode of LIBs. First the vibrational spectroscopy techniques and their relevant technical considerations for interphase characterization are briefly introduced. In the next step, the latest studies on the fundamental properties, composition, and structure of interphases employing vibrational spectroscopy techniques are presented. This review focuses on in situ/operando investigations; however, post‐mortem studies are also discussed briefly.
Increasing the cell voltage of lithium‐ion batteries (LIBs) is a straightforward approach to increasing their capacity and energy density. However, state‐of‐the‐art cathode materials like LiNixMnyCo1‐x‐yO2 (NMC) suffer from severe failure mechanisms at high operating voltages, significantly degrading the performance and cycle life of the cells. Notably, an effective cathode electrolyte interphase (CEI) mitigates these failure mechanisms. Nevertheless, a deep understanding of the formation mechanisms and properties of the CEI is necessary to tailor effective interphases. This study introduces a promising electrolyte additive for high operating voltage NMC811||graphite cells. Implementing an optimized concentration of 3‐thiophene boronic acid (3‐Thp‐BOH) significantly enhances the cells' performance and reduces capacity fading, resulting in a quadrupled cycle life and a six‐times higher accumulated specific energy. Operando shell‐isolated nanoparticle‐enhanced Raman spectroscopy (SHINERS) is employed to shed light on the formation mechanism and molecular composition of CEI during cell operation, proving that the presence of the additive results in the formation of a complex 3‐Thp‐BOH‐based polymeric CEI on the NMC811 surface. The CEI investigation is additionally supported by scanning electron microscopy and energy dispersive X‐ray analysis and highly accurate quantum chemistry modeling of the suggested polymerization mechanisms.
The implementation of silicon (Si)‐containing negative electrodes is widely discussed as an approach to increase the specific capacity of lithium‐ion batteries. However, challenges caused by severe volume changes and continuous (re‐)formation of the solid‐electrolyte interphase (SEI) on Si need to be overcome. The volume changes lead to electrolyte consumption and active lithium loss, decaying the cell performance and cycle life. Herein, the additive 2‐sulfobenzoic acid anhydride (2‐SBA) is utilized as an SEI‐forming electrolyte additive for SiOx‐containing anodes. The addition of 2‐SBA to a state‐of‐the‐art carbonate‐based electrolyte in high‐voltage LiNi0.8Mn0.1Co0.1O2, NMC811||artificial graphite +20% SiOx pouch cells leads to improved electrochemical performance, resulting in a doubled cell cycle life. The origin of the enhanced cell performance is mechanistically investigated by developing an advanced experimental technique based on operando attenuated total reflection Fourier‐transform infrared (ATR‐FTIR) spectroscopy. The operando ATR‐FTIR spectroscopy results elucidate the degradation mechanism via anhydride ring‐opening reactions after electrochemical reduction on the anode surface. Additionally, ion chromatography conductivity detection mass spectrometry, scanning electron microscopy, energy dispersive X‐ray analysis, and quantum chemistry calculations are employed to further elucidate the working mechanisms of the additive and its degradation products.
26 January 2023 in ACS Applied Materials & Interfaces
Improving the electrochemical properties and cycle life of high-voltage cathodes in lithium-ion batteries requires a deep understanding of the structural properties and failure mechanisms at the cathode electrolyte interphase (CEI). We present a study implementing an advanced Raman spectroscopy technique to specifically address the compositional features of interphase during cell operation. Our operando technique, shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS), provides a reliable platform to investigate the dynamics of the interphase structure and elucidate the compositional changes near the cathode surface. To improve the CEI properties, thiophene was introduced and investigated as an effective, high-voltage film-forming additive by largely diminishing the capacity fading triggered at high potentials in LiNi1/3Co1/3Mn1/3O2 cathodes. While the cells without thiophene show severe capacity fading, cells with an optimized concentration of thiophene exhibit a significant performance improvement. Operando SHINERS detects the presence of a stable CEI. The results suggest that the composition of the CEI is dominated by polythiophene and copolymerization products of ethylene carbonate with thiophene, which protects the electrolyte components from further decomposition. The formation mechanism of the polymeric film was modeled using quantum chemistry calculations, which shows good agreement with the experimental data.
Effective electrolyte compositions are of primary importance in raising the performance of lithium‐ion batteries (LIBs). Recently, fluorinated cyclic phosphazenes in combination with fluoroethylene carbonate (FEC) have been introduced as promising electrolyte additives, which can decompose to form an effective dense, uniform, and thin protective layer on the surface of electrodes. Although the basic electrochemical aspects of cyclic fluorinated phosphazenes combined with FEC were introduced, it is still unclear how these two compounds interact constructively during operation. This study investigates the complementary effect of FEC and ethoxy(pentafluoro)cyclotriphosphazene (EtPFPN) in aprotic organic electrolyte in LiNi0.5Co0.2Mn0.3O ∥ SiOx/C full cells. The formation mechanism of lithium ethyl methyl carbonate (LEMC)‐EtPFPN interphasial intermediate products and the reaction mechanism of lithium alkoxide with EtPFPN are proposed and supported by Density Functional Theory calculations. A novel property of FEC is also discussed here, called molecular‐cling‐effect (MCE). To the best knowledge, the MCE has not been reported in the literature, although FEC belongs to one of the most investigated electrolyte additives. The beneficial MCE of FEC toward the sub‐sufficient solid‐electrolyte interphase forming additive compound EtPFPN is investigated via gas chromatography‐mass spectrometry, gas chromatography high resolution‐accurate mass spectrometry, in situ shell‐isolated nanoparticle‐enhanced Raman spectroscopy, and scanning electron microscopy.