Increasing the cell voltage of lithium‐ion batteries (LIBs) is a straightforward approach to increasing their capacity and energy density. However, state‐of‐the‐art cathode materials like LiNixMnyCo1‐x‐yO2 (NMC) suffer from severe failure mechanisms at high operating voltages, significantly degrading the performance and cycle life of the cells. Notably, an effective cathode electrolyte interphase (CEI) mitigates these failure mechanisms. Nevertheless, a deep understanding of the formation mechanisms and properties of the CEI is necessary to tailor effective interphases. This study introduces a promising electrolyte additive for high operating voltage NMC811||graphite cells. Implementing an optimized concentration of 3‐thiophene boronic acid (3‐Thp‐BOH) significantly enhances the cells' performance and reduces capacity fading, resulting in a quadrupled cycle life and a six‐times higher accumulated specific energy. Operando shell‐isolated nanoparticle‐enhanced Raman spectroscopy (SHINERS) is employed to shed light on the formation mechanism and molecular composition of CEI during cell operation, proving that the presence of the additive results in the formation of a complex 3‐Thp‐BOH‐based polymeric CEI on the NMC811 surface. The CEI investigation is additionally supported by scanning electron microscopy and energy dispersive X‐ray analysis and highly accurate quantum chemistry modeling of the suggested polymerization mechanisms.
8 November 2023 in ACS Applied Materials & Interfaces
The film-forming electrolyte additive/co-solvent fluoroethylene carbonate (FEC) can play a crucial role in enabling high-energy-density lithium metal batteries (LMBs). Its beneficial impact on homogeneous and compact lithium (Li) deposition morphology leads to improved Coulombic efficiency (CE) of the resulting cell chemistry during galvanostatic cycling and consequently an extended cell lifetime. Herein, the impact of this promising additive/co-solvent on selected properties of LMBs is systematically investigated by utilizing an in-house developed lithium pretreatment method. The results reveal that as long as FEC is present in the organic carbonate-based electrolyte, a dense mosaic-like lithium morphology of Li deposits with a reduced polarization of only 20 mV combined with a prolonged cycle life is achieved. When the pretreated Li electrodes with an FEC-derived preformed SEI (pSEI) are galvanostatically cycled with the FEC-free electrolyte, the described benefits induced by the additive are not observable. These results underline that the favorable properties of the FEC-derived SEI are beneficial only if there is unreacted FEC in the electrolyte formulation left to constantly reform the interphase layer, which is especially important for anodes with high-volume changes and dynamic surfaces like lithium metal and lithiated silicon.