The crumb rubber (CR) recycled from waste tyres could be a viable alternative in achieving green pavements that offer exciting new markets to global investors. Adding CR into flexible pavements enhances their performance and ensures environmental sustainability. This paper will discuss the production variables, CR sizes and contents, blending techniques, optimum bitumen contents, morphology, standard characteristics, rheological characteristics, mechanical performance, greenhouse gas emissions, energy consumption and life cycle cost. This review study found that compared to traditional asphalt mixtures, the CR-modified asphalts had superior performance and longer service life. However, the dearth of information on several factors in CR asphalt production, including greenhouse gas emissions, energy consumption and life cycle cost during recycling, causes many agencies in the global asphalt industry to continue employing costly, energy-consuming additives such as styrene-butadiene-styrene (SBS) instead of CR to enhance asphalt.

This study investigates the effects of two waste materials from construction and industry, namely recycled concrete aggregate (RCA) and Type C fly ash, on the overall performance of a special type of pavement surface mixture, porous asphalt mixture. Mixtures of different combinations of RCA (for partial aggregate replacement) and fly ash (for filler replacement) were prepared in the laboratory and tested for a variety of pavement surface performance parameters, including air-void content, permeability, Marshall stability, indirect tensile strength, moisture susceptibility, Cantabro loss, macrotexture, and sound absorption. The analysis of the results showed that incorporating RCA or fly ash in a porous asphalt mixture slightly reduced the air-void content, permeability, and surface macrotexture of the mixture. A 10% replacement of granite aggregates with RCA in the porous asphalt mixtures led to a reduction in mixture stability, indirect tensile strength, resistance to raveling, and sound absorption. The further substitution of mineral filler with fly ash in the mixture, however, helped to offset the negative impact of RCA and brought the mechanical properties of the mixture with 10% RCA to levels comparable to those of the control mixture.