An important challenge for acoustic engineers in room acoustics design is related to the acoustic performance of multi-purpose auditoriums, which are typically designed to suit several performance requirements. With this intent, the analysis of several scenarios is usually performed individually, and then an acceptable solution, that may be adapted to several situations, is selected. One way of providing a more appropriate acoustic performance for each function of the auditorium is using variable sound absorption techniques to control reverberation and other relevant acoustic phenomena associated to sound perception. In this paper, the acoustic behavior of a perforated system that may be suitable for achieving a variable acoustic solution for room acoustic design is addressed. In the design of a cost-effective solution, the surface appearance is kept unchanged, while variable acoustic behavior is achieved either by closing the holes in the back face of the perforated panel or by placing a porous material in varying positions inside the backing cavity, thus accomplishing different acoustic requirements within a multipurpose auditorium. An analytical approach, based on the transfer matrix method is employed for preliminary acoustic sound absorption assessment provided by the system and to develop optimized solutions. Diffuse sound absorption is then computed and used to simulate, by the ray-tracing method, the acoustic behavior of a multipurpose auditorium to demonstrate efficient acoustic performance for different types of use.

Variable acoustics systems are promising engineering developments for multi-purpose rooms and workspaces in many buildings. However, due to space requirements associated with most of the tuning devices used for that purpose, these solutions are hardly adopted in practice. In this work, two innovative tunable sound absorbers that cope with this drawback are proposed, one consisting of rotating perforated panels and the other being a panel with an iris-type aperture. Compared with conventional perforated panel sound absorbers, the designed solutions yield a variable open area ratio system, whose configuration allows tuning the absorption bandwidth without misusing space. To assess their sound absorption coefficient, impedance tube experiments were carried out following the standardized method described in ISO 10534-2 over specimens fabricated for this purpose using laser cutting and additive manufacturing technology. The results not only show their good sound absorption performance but also highlight their tuning capabilities. Complementarily, a model based on the ray tracing method was developed to evaluate the performance of these solutions in a case study room, for different occupancy levels, with the results supporting the previous assertions and revealing the improved intelligibility features when used in such scenarios. The proposed solutions, together with the prediction model, provide a feasible approach for the design and development of tunable sound absorbers in variable room acoustics.