The development of different methods for tuning surface properties is currently of great interest. The presented work is devoted to the use of modified nanodiamonds to control the wetting and biological fouling of polymers using optical sensors as an example. We have shown that, depending on the type of modification and the amount of nanodiamonds, the surface of the same fluorinated polymer can have both bactericidal properties and, on the contrary, good adhesion to the biomaterial. The precise control of wetting and biofouling properties of the surface was achieved by the optimization of the modified nanodiamonds thermal anchoring conditions. In vitro and in vivo tests have shown that the fixation of amine functional groups leads to inhibition of biological activity, while the presence of a large number of polar groups of mixed composition (amide and acid chloride) promotes adhesion of the biomaterial and allows one to create a biosensor on-site. A comprehensive study made it possible to establish that in the first 5 days the observed biosensor response is provided by cells adhered to the surface due to the cell wall interaction. On the 7th day, the cells are fixed by means of the polysaccharide matrix, which provides much better retention on the surface and a noticeably greater response to substrate injections. Nevertheless, it is important to note that even 1.5 h of incubation is sufficient for the formation of the reliable bioreceptor on the surface with the modified nanodiamonds. The approach demonstrated in this work makes it possible to easily and quickly isolate the microbiome on the surface of the sensor and perform the necessary studies of its substrate specificity or resistance to toxic effects.

This paper reports on the creation of a new composite sensor material for detecting molecular oxygen, in which the fluorescent indicator, Pt (II)...

Electropolymerized thionine was used as a redox-active polymer to create a two-mediated microbial biosensor for determining biochemical oxygen demand (BOD). The electrochemical characteristics of the conducting system were studied by cyclic voltammetry and electrochemical impedance spectroscopy. It has been shown that the most promising in terms of the rate of interaction with the yeast B. adeninivorans is the system based on poly(thionine), single-walled carbon nanotubes (SWCNT), and neutral red (k_int = 0.071 dm³/(g·s)). The biosensor based on this system is characterized by high sensitivity (the lower limit of determined BOD concentrations is 0.4 mgO₂/dm³). Sample analysis by means of the developed analytical system showed that the results of the standard dilution method and those using the biosensor differed insignificantly. Thus, for the first time, the fundamental possibility of effectively using nanocomposite materials based on SWCNT and the redox-active polymer poly(thionine) as one of the components of two-mediator systems for electron transfer from yeast microorganisms to the electrode has been shown. It opens up prospects for creating stable and highly sensitive electrochemical systems based on eukaryotes.

Objectives. Herein, the effects of cationic polyelectrolytes on the properties of solid substrate immobilized acid–base indicators are investigated to predict shifts in their spectral patterns and characteristics. Methods. The properties of the silica gel immobilized indicator dye in a solution of the cationic polyelectrolyte were studied using automatic photometric titration in the visible region and spectrophotometry using a specialized computerized setup. Results. The measured pKa value of the immobilized dye, which had shifted by three units to the acidic region, was very similar to the pKa value observed for the indicator in the modifying polymer solution. The observed change in pKa of the immobilized dye and the influence of the solution’s ionic strength were attributed to the local electric potential of the polymer globule. In contrast to the processes associated with covalent immobilization, the effect exerted by the solution’s ionic strength on the indicator reaction diminishes, which, in turn, affects the measured values obtained.Conclusions. The creation of a sensor for continuous visualization of pH levels based on Congo Red immobilized on silica gel was described. Here, a color transition was noted between pH 1 and 4. These materials can be used to monitor metal extraction processes from industrial effluents or to optimize the extraction of valuable actinides. The approach demonstrated in this work can be applied to immobilize other indicators for pH level monitoring purposes or the production of sensors for other analytes.

The patterns of protolytic reactions in the immobilized state are studied using the example of classical systems with photoinduced proton transfer (2-napht

The effect of anionic, nonionic and cationic surfactants on the protonation reaction of acridine in an excited state has been studied. In the case of sodium decyl sulfate and sodium dodecyl sulfate, the observed shift in pK * to a more alkaline region was +0.6 and +0.9 units (from 9.9 to 10.5 and 10.8 respectively), which corresponds to a decrease in the Gibbs free energy by 3.5 and 5.0 kJ mol^–1.