In the last decade, there has been continuous competition between two methods for detecting the concentration of dissolved oxygen: amerometric (Clark electrode) and optical (quenching of the phosphorescence of the porphyrin metal complex). Each of them has obvious advantages and disadvantages. This competition is especially acute in the development of biosensors, however, an unbiased comparison is extremely difficult to achieve, since only a single detection method is used in each particular study. In this work, a microfluidic system with synchronous detection of the oxygen concentration by two methods was created for the purpose of direct comparison. The receptor element is represented by Saccharomyces cerevisiae yeast cells adsorbed on a composite material, previously developed by our scientific group. To our knowledge, this is the first work of this kind in which the comparison of the oxygen detection methods is carried out directly.

The possibility of the developing a biochemical oxygen demand (BOD) biosensor based on electroactive biofilms of activated sludge grown on the surface of a graphite-paste electrode modified with carbon nanotubes was studied. A complex of microscopic methods controlled biofilm formation: optical microscopy with phase contrast, scanning electron microscopy, and laser confocal microscopy. The features of charge transfer in the obtained electroactive biofilms were studied using the methods of cyclic voltammetry and electrochemical impedance spectroscopy. The rate constant of the interaction of microorganisms with the extracellular electron carrier (0.79 ± 0.03 dm³(g s)⁻¹) and the heterogeneous rate constant of electron transfer (0.34 ± 0.02 cm s⁻¹) were determined using the cyclic voltammetry method. These results revealed that the modification of the carbon nanotubes’ (CNT) electrode surface makes it possible to create electroactive biofilms. An analysis of the metrological and analytical characteristics of the created biosensors showed that the lower limit of the biosensor based on an electroactive biofilm of activated sludge is 0.41 mgO₂/dm³, which makes it possible to analyze almost any water sample. Analysis of 12 surface water samples showed a high correlation (R² = 0.99) with the results of the standard method for determining biochemical oxygen demand.

Nitrate is a substance which influences the prevailing redox conditions in groundwater, and in turn the behaviour of U. The study of groundwater in an area with low-level radioactive sludge storage facilities has shown their contamination with sulphate and nitrate anions, uranium, and some associated metals. The uranyl ion content in the most contaminated NO₃–Cl–SO₄–Na borehole is 2000 times higher (1.58 mg/L) than that in the background water. At the same time, assessment of the main physiological groups of microorganisms showed a maximum number of denitrifying and sulphate-reducing bacteria (e.g., Sulfurimonas) in the water from the same borehole. Biogenic factors of radionuclide immobilization on sandy rocks of upper aquifers have been experimentally investigated. Different reduction rates of NO₃⁻, SO₄²⁻, Fe(III) and U(VI) with stimulated microbial activity were dependent on the pollution degree. Moreover, 16S rRNA gene analysis of the microbial community after whey addition revealed a significant decrease in microbial diversity and the activation of nonspecific nitrate-reducing bacteria (genera Rhodococcus and Rhodobacter). The second influential factor can be identified as the formation of microbial biofilms on the sandy loam samples, which has a positive effect on U sorption (an increase in Kd value is up to 35%). As PHREEQC physicochemical modelling numerically confirmed, the third most influential factor that drives U mobility is the biogenic-mediated formation of a sulphide redox buffer. This study brings important information, which helps to assess the long-term stability of U in the environment of radioactive sludge storage facilities.

Nickel is one of the most dangerous environmental pollutants and its removal from wastewater is an important task. The capacity of a mineral–organic hybrid adsorbent, consisting of Shewanella xiamenensis biofilm and zeolite (clinoptilolite of the Chola deposit), to remove metal ions from nickel-containing batch systems under different experimental conditions was tested. The obtained biosorbent was characterized using neutron activation, SEM, and FTIR techniques. It was established that maximum removal of cations, up to 100%, was achieved at pH 6.0. Several mathematical models were applied to describe the equilibrium and kinetics data. The maximum adsorption capacity of the hybrid biosorbent, calculated using the Langmuir model, varied from 3.6 to 3.9 mg/g. Negative Gibbs energy values and positive ∆H° values indicate the spontaneous and endothermic character of the biosorption process. The effects of several parameters (pH and biosorbent dosage) on Ni(II) removal from real effluent, containing nickel with a concentration of 125 mg/L, were investigated. The optimal pH for Ni(II) removal was 5.0–6.0 and an increase of sorbent dosage from 0.5 to 2.0 led to an increase in Ni(II) removal from 17% to 27%. At two times effluent dilution, maximum Ni(II) removal of 26% was attained at pH 6.0 and sorbent dosage of 1.0 g. A 12-fold effluent dilution resulted in the removal of 72% of Ni(II) at the same pH and sorbent dosage values. The obtained hybrid biosorbent can be used for Ni(II) removal from industrial effluents with low Ni(II) concentrations.