Xianhao Le

Dr. Xianhao Le

Department of Electrical and Computer Engineering, National University of Singapore, Singapore 117583, Singapore
orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 August 2021 in Micromachines
Verified
Journal Article
Open access
PDF file
ZRZhihao Ren
Zhihao Ren
JXJikai Xu
Jikai Xu
XLXianhao Le
Xianhao Le
Chengkuo LeeChengkuo Lee
Chengkuo Lee
Wafer bonding technology is one of the most effective methods for high-quality thin-film transfer onto different substrates combined with ion implantation processes, laser irradiation, and the removal of the sacrificial layers. In this review, we systematically summarize and introduce applications of the thin films obtained by wafer bonding technology in the fields of electronics, optical devices, on-chip integrated mid-infrared sensors, and wearable sensors. The fabrication of silicon-on-insulator (SOI) wafers based on the Smart CutTM process, heterogeneous integrations of wide-bandgap semiconductors, infrared materials, and electro-optical crystals via wafer bonding technology for thin-film transfer are orderly presented. Furthermore, device design and fabrication progress based on the platforms mentioned above is highlighted in this work. They demonstrate that the transferred films can satisfy high-performance power electronics, molecular sensors, and high-speed modulators for the next generation applications beyond 5G. Moreover, flexible composite structures prepared by the wafer bonding and de-bonding methods towards wearable electronics are reported. Finally, the outlooks and conclusions about the further development of heterogeneous structures that need to be achieved by the wafer bonding technology are discussed.

18 April 2023 in Nanoenergy Advances
Verified
Journal Article
Open access
PDF file
XLXianhao Le
Xianhao Le
XGXinge Guo
Xinge Guo
Chengkuo LeeChengkuo Lee
Chengkuo Lee
Facing the energy consumption of a huge number of distributed wireless Internet of Things (IoT) sensor nodes, scavenging energy from the ambient environment to power these devices is considered to be a promising method. Moreover, abundant energy sources of various types are widely distributed in the surrounding environment, which can be converted into electrical energy by micro-nano energy harvesters based on different mechanisms. In this review paper, we briefly introduce the development of different energy harvesters according to the classification of target energy sources, including microscale and nanoscale energy harvesters for vibrational energy sources, microscale energy harvesters for non-vibrational energy sources, and micro-nano energy harvesters for hybrid energy sources. Furthermore, the current advances and future prospects of the applications of micro-nano energy harvesters in event-based IoT systems and self-sustained systems are discussed.

17 August 2021 in Journal of Microelectromechanical Systems
Verified
Journal Article
Closed access
HDHong Ding
Hong Ding
DYDengfei Yang
Dengfei Yang
MQMengjiao Qu
Mengjiao Qu
CYChao Yang
Chao Yang
XCXuying Chen
Xuying Chen
Jin XieJin Xie
Jin Xie
This letter describes a blood flowmeter by the pulsed wave Doppler (PWD) ultrasound detection procedure utilizing piezoelectric micromachined ultrasonic transducers (pMUTs) with the aluminum nitride (AlN) film as the piezoelectric material. The transceiver electronics for the PWD scheme are constructed for system control and signal processing, and a blood-mimicking fluid (BMF) is synthesized for flow velocity tests. Both the average Doppler frequency-shift and Doppler power spectrum density (PSD) shift with respect to the flow velocity have been characterized and validated, and the flow direction can also be recognized. Finally, a real-time pulsatile flow measurement is demonstrated to emulate the feasibility of monitoring blood flows in practice. [2021-0077]

1 June 2020 in Journal of Microelectromechanical Systems
Verified
Journal Article
Closed access
JPJintao Pang
Jintao Pang
XLXianhao Le
Xianhao Le
KPKai Pang
Kai Pang
ZXZhen Xu
Zhen Xu
CGChao Gao
Chao Gao
Jin XieJin Xie
Jin Xie
Surface acoustic wave (SAW) humidity sensors promise broad prospects for Internet of Things (IoT) applications due to the advantages of low cost, portability, and high sensitivity. However, previous researches mainly focused on developing SAW devices with higher resonant frequencies, or using new sensing materials to improve the performance of SAW humidity sensors. Few researches studied the specific response mechanism of SAW humidity sensors, which restricted further development of the sensors. In this paper, the sensing mechanism of a graphene oxide (GO) film-based SAW humidity sensor is thoroughly studied by investigating the mechanical and electrical parameters of the uniform GO membrane at different relative humidity (from 10% RH to 90% RH). After taking these parameters into consideration for the mechanism analysis, we quantitatively indicate that the mass loading (~800 ppm) and viscoelastic effects (~60 ppm) are the primary and secondary influence factors of the sensor's humidity response respectively, while the acoustoelectric interaction has little effect on the sensitivity.

11 April 2019 in IEEE Electron Device Letters
Verified
Journal Article
Closed access
XLXinxin Liu
Xinxin Liu
DCDongyang Chen
Dongyang Chen
DYDengfei Yang
Dengfei Yang
XCXuying Chen
Xuying Chen
XLXianhao Le
Xianhao Le
Jin XieJin Xie
Jin Xie
Piezoelectric micro-machined ultrasonic transducers (pMUTs) are gaining popularity in integrated smart ultrasonic systems. In this letter, we report a pMUT toward acoustic communication with mechanical computation ability for the first time. The novel pMUT design can successfully operate 2-bit OR, XOR, XNOR, and NOT mechanical logic operations based on resonance frequency tuning. The proposed mechanical actuation can operate steady and reliable binary amplitude shift keying (BASK), binary frequency shift keying (BFSK) modulations with its naturally detached resonance modes in a single device. Such an idea can greatly reduce the complexity and cost of the acoustic communication system design in terms of hardware. A minimum response time of about 0.14 ms is achieved with the proposed device, equivalent to a bit rate over 3.5 kb/s. In addition, a higher data rate can be achieved since the operating speed can be greatly improved by impedance matching and shrinking the pMUT size.

1 August 2020 in Journal of Microelectromechanical Systems
Verified
Journal Article
Closed access
JPJintao Pang
Jintao Pang
XLXianhao Le
Xianhao Le
KPKai Pang
Kai Pang
ZXZhen Xu
Zhen Xu
CGChao Gao
Chao Gao
Jin XieJin Xie
Jin Xie
Piezoelectric cantilevers promise broad prospects for gas sensing and biosensing due to the high sensitivity and fast response. The strong correlation between the resonant frequency and sensitivity leads to numerous cantilever-based sensors using the high-order flexural mode to realize higher absolute sensitivity. However, experiment results show that the relative sensitivity of the sensors decreases with the increase of the mode order. Herein, we explain the relative sensitivity degeneration of normal cantilevers with a modified coefficient of equivalent mass, and propose a cantilever-based humidity sensor using high-frequency mode driven by interdigital electrodes (IDEs) to enhance the relative sensitivity. Compared with the high-order mode excited by normal configuration (70.4 MHz), the high-frequency mode driven by IDEs (77.3 MHz) demonstrates an improved sensitivity around 39.2 Hz·cm²/ng (1.68x) at 10%-90% relative humidity. The sensitivity enhancement by IDEs is consistent with the result calculated by the modified coefficient. [2020-0055]