Spray strips are deflectors added to the hull to reduce the Wetted Surface Area (WSA). The reduced WSA will decrease the total ship drag caused by the deflection of the spray strip installation. The research aimed to predict the function of the spray strip to improve ship performance using Computational Fluid Dynamics (CFD). The numerical approach in this study used the Finite Volume Method (FVM) with the RANS (Reynolds-averaged Navier–Stokes) equation to solve fluid dynamics problems. VOF (Volume of Fluid) was used to model the water and air phases. The results of this study indicated that the number of spray strips would have a significant effect compared to without using a spray strip. Spray strips with three strips could reduce the total resistance by 4.9% at Fr 1.78. Spray strips would increase the total resistance value by 2.1% at low speeds. Spray strips were effective for reducing total resistance at Fr > 1 or the planing mode conditions. The total resistance prediction used three suggestion profiles with the best performance to reduce total resistance by 6.0% at Fr 1.78.
Sloshing is one of challenging problem in the free surface flow, because is dealing with large deformation of fluid. The present paper was carried out of numerical sloshing in the prismatic tank that resemble of LNG membrane type carrier. Pressure sensor was used to validate the dynamic pressure in low filling ratio of tank. Forced oscillation motion in sway with f = 1.08 Hz and amplitude of motion 6.52 mm. A single, and double vertical baffles are used to reduce dynamic pressure and hydrodynamic force. The ratio of baffle heigh with water depth is 0.9. A meshless computational fluid dynamics (CFD) was used to reproduce sloshing in the prismatic tank. Smoothed particle hydrodynamics (SPH) is one of the major meshless CFD. In addition, The advanced visualization was performed using Blender version 2.92. The results showed the vertical baffles effectively reduce the dynamic pressure and hydrodynamic force. Moreover, the advanced visualisation made sloshing simulation more realistic, and attracting compare conventional SPH post-processing.
Ship resistance is one of the main factors affecting the design of a ship. Catamaran boat is a ship with small wet surface area that able to reduce drag and improve ship power. Generally, a bulbous bow is implemented to reduce wave resistance because the bulbous shape is believed to attenuate the bow wave system. Additionally, the bulbous bow also tends to reduce viscous resistance. When the flow around the body is smooth, the total ship resistance can be reduced significantly if the optimum bulbous bow is obtained. In this study, the main purpose is to get the bulbous bow shape in catamaran boat which produces the smallest ship resistance by using computational fluid dynamic (CFD). Generating the variation of the bulbous bow shapes apply the one-to-one correspondence of the cross section parameter (ABT) and lateral parameter (ABL). The result of investigation shows that application of bulbous bow on catamaran boat can reduce about 11-13% of total resistance of ship.
1 March 2021 in IOP Conference Series: Earth and Environmental Science
Resistance greatly affects on selection of the main engine and ship fuel consumption. To achieve the speed of the ship, the ship must be prepared to overcome resistance in the waters to be passed by choosing the right engine according to the needs of the ship. In the last few years there have been many studies on biomimetics or the use of systems in nature to be applied in a technology. Such as the use of Leading edge protuberances. Despite its large size and stiff flexibility, the humpback whale has a good maneuver even when chasing prey compared to other animals of its size. This study aims to obtain the highest lift force result and the smallest resistance with a hydrofoil model configuration of leading edge protuberances which resembles a humpback whale fin (megaptra novaengliae). The Computational Fluid Dynamics (CFD) is applied to analyse lift faorce and ship resistance of all models variation. The results indicates that from all variation of models at the Fn 1.356, the model has 5 ° angle of attack were able to reduce the total resistance value of Pilot Boat by 35.13%.