Spray strips are deflectors added to the hull to reduce the Wetted Surface Area (WSA). The reduced WSA will decrease the total ship drag caused by the deflection of the spray strip installation. The research aimed to predict the function of the spray strip to improve ship performance using Computational Fluid Dynamics (CFD). The numerical approach in this study used the Finite Volume Method (FVM) with the RANS (Reynolds-averaged Navier–Stokes) equation to solve fluid dynamics problems. VOF (Volume of Fluid) was used to model the water and air phases. The results of this study indicated that the number of spray strips would have a significant effect compared to without using a spray strip. Spray strips with three strips could reduce the total resistance by 4.9% at Fr 1.78. Spray strips would increase the total resistance value by 2.1% at low speeds. Spray strips were effective for reducing total resistance at Fr > 1 or the planing mode conditions. The total resistance prediction used three suggestion profiles with the best performance to reduce total resistance by 6.0% at Fr 1.78.
With the increased emphasis on the need to use recyclable bio-based materials and a better understanding of the mechanical properties of laminated bamboo, there is currently a great deal of interest in developing a new generation of low-cost bamboo-based composites for use in fishing vessels. Laminated bamboo composites (LBCs) comprised of Apus bamboo ( Gigantochloa apus ) and fibreglass mats were investigated to obtain the mechanical characteristics. The LBC with 45°/−45° cross-fibre directions combined with chopped strand mat fibreglass was developed under different layers and mass fractions with the same composite thickness. The influence of different numbers of laminated bamboo layers (3–7 layers) on several mechanical testings, including impact tests using ASTM D256, bending tests using ASTM D7264, tensile tests using ASTM D3039, V-notched beam test using ASTM D7078, and lap shear tests using ASTM D5868 standard, were carried out. The result showed that the strategy in improving the strength properties of LBCs could be achieved by using a thinner bamboo lamina with a higher number of bamboo layers. It was found that bamboo composites with 7 layers with a higher epoxy mass matrix had superior mechanical properties than those with 3 and 5 layers at the same thickness. Another finding revealed that adding fibreglass mat to current LBCs improved mechanical properties compared to previous research, explicitly bending strength increased by about 4.02–7.56% and tensile strength in the range of 12.44–17.73%. It can be found that only specimen with 7 layers fulfils the Indonesian Bureau Classification’s bending and tensile strength threshold.
1 January 2022 in International Journal of Engineering
Drag is one of the main factors in improving fuel efficiency. Various study in regards to improve drag performance of a planing hull amongst them is a stern flap. The main parameters to design a stern flap are span length and angle of stern flap. The stern flap works by changing pressure distribution over the ship's bottom and creating a lift force on the stern transom part. This study aims to analyze the behavior of stern flap in variations of span length and angle of stern flap towards drag performance of Fridsma hull form. Finite Volume Method (FVM) and Reynolds-Averaged Navier - Stokes (RANS) are used to predict the hull resistance during simulations. Results show that shear drag is very sensitive towards the total drag value, proving that shear drag valued at least 60% of the total drag in each planing hull multi-phase characteristics phase. Stern flap with 58% of hull breadth span length installed at 0° is considered the most optimal, reducing 10.2% of total drag, followed by 18% displacement reduction. In conclusion, the stern flap effectively improves the Fridsma hull’s total drag and its components on 0.89 < Fr < 1.89.
Sloshing is one of challenging problem in the free surface flow, because is dealing with large deformation of fluid. The present paper was carried out of numerical sloshing in the prismatic tank that resemble of LNG membrane type carrier. Pressure sensor was used to validate the dynamic pressure in low filling ratio of tank. Forced oscillation motion in sway with f = 1.08 Hz and amplitude of motion 6.52 mm. A single, and double vertical baffles are used to reduce dynamic pressure and hydrodynamic force. The ratio of baffle heigh with water depth is 0.9. A meshless computational fluid dynamics (CFD) was used to reproduce sloshing in the prismatic tank. Smoothed particle hydrodynamics (SPH) is one of the major meshless CFD. In addition, The advanced visualization was performed using Blender version 2.92. The results showed the vertical baffles effectively reduce the dynamic pressure and hydrodynamic force. Moreover, the advanced visualisation made sloshing simulation more realistic, and attracting compare conventional SPH post-processing.