Ahmet Yildiz

Prof. Dr. Ahmet Yildiz

Bursa Uludag University, Engineering Faculty, Automotive Engineering Department
orcid

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 February 2022 in Journal of Vibration and Control
Verified
Journal Article
Closed access
ÖBÖmer Bingül
Ömer Bingül
Ahmet YildizAhmet Yildiz
Ahmet Yildiz
This paper considers fuzzy logic and proportional integral derivative based multi-objective optimization of a non-linear active suspension system of a 4 × 4 in-wheel motor-driven electric vehicle by using the non-dominated sorting genetic algorithm II. The active suspension system of the electric vehicle and its controllers are optimized to achieve International Organization for Standardization2631-1 ride comfort and health criteria, also providing the actual working conditions such as roll angle and tire load transfers simultaneously for driving safety. In this regard, a non-linear full electrical vehicle model with quadratic tire and cubic suspension stiffnesses with 11 degrees of freedom and a seat-driver model with 5 degrees of freedom are implemented and optimized regarding seven objective functions determined from the root mean square of head and seat accelerations, crest factor , vibration dose value , the ratio of head and seat accelerations, the ratio of the upper torso and seat acceleration, root mean square upper torso acceleration, and root mean square of suspension, tire, and in-wheel motor displacements. The design variables of the optimization problem are chosen as the stiffnesses and damping coefficients of the suspension, in-wheel motors, and seat, as well as the parameters of the proportional derivative and fuzzy logic controllers. The obtained results demonstrate that significant improvements can be achieved by using a controller over the passive systems. It is also noted that the fuzzy logic controller improves ride comfort and the health criterion over proportional derivative system up to 13%, while the load transfer ratio index showed no adverse change between models concerning the rollover condition. The outcomes of this work clearly state that significant improvements, in terms of vibration exposure, can be achieved with the help of reducing the vibration amplitude of an in-wheel motor-driven electrical vehicle active suspension system by using multi-objective optimization considering a non-linear full vehicle model and realistic working conditions such as tire load transfer and vehicle body roll during cornering circumstances. Thus, obtained results are of utmost importance for manufacturers about the active suspension design process providing both a safe and comfortable driving of in-wheel driven electric vehicles.

11 March 2021 in Applied Sciences
Verified
Journal Article
Open access
Ahmet YildizAhmet Yildiz
Ahmet Yildiz
MÖMert ÖZEL
Mert ÖZEL
Today, with the increasing transition to electric vehicles (EVs), the design of highly energy-efficient vehicle architectures has taken precedence for many car manufacturers. To this end, the energy consumption and recovery rates of different powertrain vehicle architectures need to be investigated comprehensively. In this study, six different powertrain architectures—four independent in-wheel motors with regenerative electronic stability control (RESC) and without an RESC, one-stage gear (1G) transmission, two-stage gear (2G) transmission, continuously variable transmission (CVT) and downsized electric motor with CVT—were mathematically modeled and analyzed under real road conditions using nonlinear models of an autonomous hydrogen fuel-cell electric vehicle (HFCEV). The aims of this paper were twofold: first, to compare the energy consumption performance of powertrain architectures by analyzing the effects of the regenerative electronic stability control (RESC) system, and secondly, to investigate the usability of a downsized electrical motor for an HFCEV. For this purpose, all the numerical simulations were conducted for the well-known FTP75 and NEDC urban drive cycles. The obtained results demonstrate that the minimum energy consumption can be achieved by a 2G-based powertrain using the same motor; however, when an RESC system is used, the energy recovery/consumption rate can be increased. Moreover, the results of the article show that it is possible to use a downsized electric motor due to the CVT, and this powertrain significantly reduces the energy consumption of the HFCEV as compared to all the other systems. The results of this paper present highly significant implications for automotive manufacturers for designing and developing a cleaner electrical vehicle energy consumption and recovery system.

1 January 2019 in International Journal of Vehicle Design
Verified
Journal Article
Closed access
Ahmet YildizAhmet Yildiz
Ahmet Yildiz
This paper presents a comparative study on the optimal non-linear seat and suspension design for an in-wheel-motor driven electric car using half vehicle model (HVM) by integrating different population-based optimisation techniques. The vehicle and the human body models are used to determine the optimal values leading to better ride comfort by means of different optimisation methods, including the particle swarm optimisation (PSO), the differential evolution (DE), and the genetic algorithm (GA). Since the non-linear approach reflects more realistic vibration behaviour than the linear one, the seat and suspension springs are assumed to have cubic progressive characteristics in the mathematical model. An objective function is proposed according to the feasible ideal solution of the root-mean-square (RMS) values of the seat, vehicle, and head accelerations and the suspension deflections considering the constrained functions. The results demonstrate that overall vibration amplitudes are significantly reduced and different techniques can provide a better reduction in different cases.

15 March 2015 in Journal of Mechanical Science and Technology
Verified
Journal Article
Closed access
PDF file
Ahmet YildizAhmet Yildiz
Ahmet Yildiz
OKOsman Kopmaz
Osman Kopmaz
SCSevda Telli Cetin
Sevda Telli Cetin

24 October 2022 in Machines
Verified
Journal Article
Open access
PDF file
DSDeniz KAVALA SEN
Deniz KAVALA SEN
Ahmet YildizAhmet Yildiz
Ahmet Yildiz
OKOsman Kopmaz
Osman Kopmaz
In this paper, a structural design and controller optimization process for a five-bar planar manipulator are studied using three different population-based optimization techniques: particle swarm optimization, genetic algorithm, and differential evolution. First, the desired kinematic properties of the manipulator, such as the position, velocity, and acceleration of the endpoint, are determined using inverse kinematics. Then, an optimization problem is created to minimize the shaking force and moments, and the desired kinematic quantities are implemented as constraints. All the link properties of the manipulator are defined as design variables, and the optimization results are obtained. The results show that it is possible to significantly reduce the shaking force and moment significantly thanks to the optimal design parameters. Finally, the controller is optimized to find the best PID gains considering the forward kinematics of the manipulator. It is observed that the shaking force and shaking moment can be reduced by 99% and 54%, respectively, which has a very positive effect on the accuracy of the trajectory tracking. Moreover, the performances of the optimization methods are compared by using the same number of iterations in the calculations, and thus, it can be seen that the GA method achieves the best results compared to the others. Therefore, the results of this study are of utmost importance for a manufacturer, who wants to design a five-bar planar manipulator and its controller.

30 September 2019 in Vibroengineering PROCEDIA
Verified
Journal Article
Open access
PDF file
Ahmet YildizAhmet Yildiz
Ahmet Yildiz
This paper is considered with a non-linear suspension design for half vehicle model by using particle swarm optimization technique. To analyze the ride comfort, a five-degree of freedom system is built, and it is integrated with the Particle Swarm Optimization (PSO) for optimizing the vehicle vibrations. A multi-objective function is proposed as the sum of the minimum seat and vehicle body acceleration, the minimum suspension deflection and the constraints and the design variables of the optimization problem are selected as the spring and damping coefficients of the front and rear suspension and the non-linear spring and the linear damping coefficients of the seat. The simulations are carried out and the results are compared with the non-optimized values. It is demonstrated that the vehicle vibration is decreased significantly with the help of the optimum values of the suspension parameters.