Cable-driven parallel robots (CDPRs) are categorized as a type of parallel manipulators. In CDPRs, flexible cables are used to take the place of rigid links. The particular property of cables provides CDPRs several advantages, including larger workspaces, higher payload-to-weight ratio and lower manufacturing costs rather than rigid-link robots. In this paper, the history of the development of CDPRs is introduced and several successful latest application cases of CDPRs are presented. The theory development of CDPRs is introduced focusing on design, performance analysis and control theory. Research on CDPRs gains wide attention and is highly motivated by the modern engineering demand for large load capacity and workspace. A number of exciting advances in CDPRs are summarized in this paper since it is proposed in the 1980s, which points to a fruitful future both in theory and application. In order to meet the increasing requirements of robot in different areas, future steps foresee more in-depth research and extension applications of CDPRs including intelligent control, composite materials, integrated and reconfigurable design.

This paper proposes a cable-driven parallel waist rehabilitation robot with two-level control algorithm to assist the patients with waist injuries to do some rehabilitation training. The uniqueness of the robot is that it can accurately implement the relative lateral bending, flexion, extension and rotation of the waist on the premise of the safety. This is enabled by a mechanism design according to the motion characteristics of the human waist, which can satisfy the need of different waist injury patients. The kinematics and dynamics of the robot are analyzed. In addition, a two-level controller is introduced to improve the accuracy of the rehabilitation training trajectory on the premise of the safety of patients and reduce the system calculation. The PID algorithm is adopted to realize the position control in the low-level controller to ensure the accuracy of the robot. In the high-level controller, the fuzzy algorithm is used to adjust the parameters of the low-level controller according to the tension variation of cables, which ensures the patient safety and the stable operation of the robot. Also, a prototype waist rehabilitation robot is developed for experimental calibration and performance testing. Results indicate that the designed robot system can achieve the waist rehabilitation training and the control algorithm can improve the system performance under the external disturbance.

Ageing population is now a global challenge, where physical deterioration is the common feature in elderly people. In addition, the diseases, such as spinal cord injury, stroke, and injury, could cause a partial or total loss of the ability of human locomotion. Thus, assistance is necessary for them to perform safe activities of daily living. Robotic hip exoskeletons are able to support ambulatory functions in elderly people and provide rehabilitation for the patients with gait impairments. They can also augment human performance during normal walking, loaded walking, and manual handling of heavy-duty tasks by providing assistive force/torque. In this article, a systematic review of robotic hip exoskeletons is presented, where biomechanics of the human hip joint, pathological gait pattern, and common approaches to the design of robotic hip exoskeletons are described. Finally, limitations of the available robotic hip exoskeletons and their possible future directions are discussed, which could serve a useful reference for the engineers and researchers to develop robotic hip exoskeletons with practical and plausible applications in geriatric orthopaedics. The past decade has witnessed a remarkable progress in research and development of robotic hip exoskeletons. Our aim is to summarize recent developments of robotic hip exoskeletons for the engineers, clinician scientists and rehabilitation personnel to develop efficient robotic hip exoskeletons for practical and plausible applications.

Planetary gear trains (PGTs) are widely used in machinery to transmit angular velocity ratios or torque ratios. The graph theory has been proved to be an effective tool to synthesize and analyze PGTs. This paper aims to propose a new graph model, which has some merits relative to the existing ones, to represent the structure of PGTs. First, the rotation graph and canonical rotation graph of PGTs are defined. Then, by considering the edge levels in the rotation graph, the displacement graph and canonical displacement graph are defined. Each displacement graph corresponds to a PGT having the specified functional characteristics. The synthesis of five-link one degree-of-freedom (1DOF) PGTs is used as an example to interpret and demonstrate the applicability of the present graph representation in the synthesis process. The present graph representation can completely avoid the generation of pseudo-isomorphic graphs and can be used in the computer-aided synthesis and analysis of PGTs.

Three-dimensional (3D) printing technology has been greatly developed in the last decade and gradually applied in the construction, medical, and manufacturing industries. However, limited workspace and accuracy restrict the development of 3D printing technology. Due to the extension range and flexibility of cables, cable-driven parallel robots can be applied in challenging tasks that require motion with large reachable workspace and better flexibility. In this paper, a cable-driven parallel robot for 3D Printing is developed to obtain larger workspace rather than traditional 3D printing devices. A kinematic calibration method is proposed based on cable length residuals. On the basis of the kinematic model of the cable-driven parallel robot for 3D Printing, the mapping model is established among geometric structure errors, zero errors of the cable length, and end-effector position errors. In order to improve the efficiency of calibration measurement, an optimal scheme for measurement positions is proposed. The accuracy and efficiency of the kinematics calibration method are verified through numerical simulation. The calibration experiment based on the motion capture system indicates that the position error of end-effector is decreased to 0.6157 mm after calibration. In addition, the proposed calibration method is effective and verified for measurement positions outside optimal positions set through experiments.