We discuss a comprehensive approach to the characterization of permanent magnets with the pulsed field magnetometer. The approach is based on a systematic comparison of the results obtained by this method with those from the conventional closed-circuit and open-sample methods and on the assessment of the dynamic phenomena engendered by the application of the fast exciting field pulse. Such phenomena derive from the thermal fluctuation after effect and the eddy currents, whose contributions to hysteresis loop swelling are brought to light and separately evaluated. We show that the quasi-static hysteresis loop can be retrieved from the dynamically obtained one by compensating for the magnetic viscosity field, found to be proportional to the coercive field, and the eddy-current counterfield. A simple analytical formulation accounts for and predicts the effect of the counterfield.

The use of nanotechnologies in the applied biomedical sciences can offer a new way to treat infections and disinfect surfaces, materials, and products contaminated with various types of viruses, bacteria, and fungi. The Cu-Au nanoparticles (NPs) were obtained by an eco-friendly method that allowed the obtaining in a one-step process of size controlled, well dispersed, fully reduced, highly stable NPs at very mild conditions, using high energy ionizing radiations. The gamma irradiation was performed in an aqueous system of Cu²⁺/Au³⁺/Sodium Dodecyl Sulfate (SDS)/Ethylene Glycol. After irradiation, the change of color to ruby-red was the first indicator for the formation of NPs. Moreover, the UV-Vis spectra showed a maximum absorption peak between 524 and 540 nm, depending on the copper amount. The Cu-Au NPs presented nearly spherical shapes, sizes between 20 and 90 nm, and a zeta potential of about −44 mV indicating a good electrostatic stability. The biocidal properties performed according to various standards applied in the medical area, in dirty conditions, showed a 5 lg reduction for Staphylococcus aureus, Pseudomonas aeruginosa, and Enterococcus hirae, a 5 lg reduction for both enveloped and non-enveloped viruses such as Adenovirus type 5, Murine Norovirus, and human Coronavirus 229E, and a 4 lg reduction for Candida albicans, respectively. Thus, the radiochemically synthesized Cu-Au alloy NPs proved to have high biocide efficiency against the tested bacteria, fungi, and viruses (both encapsulated and non-encapsulated). Therefore, these nanoparticle solutions are suitable to be used as disinfectants in the decontamination of hospital surfaces or public areas characterized by high levels of microbiological contamination.

The use of the linear magnetostrictive motor (LMM) in outer space, in the absence of Earth’s gravitational field and where extreme temperatures manifest, involves innovative technical solutions that result in significant construction changes. This paper highlights these constructive changes and presents the mathematical modeling followed by the numerical simulation of different operating regimes of LMM. The novelty of the design resides in using a bias coil instead, in addition to permanent magnets, to magnetize the magnetostrictive core and pulse width modulated (PWM) power sources to control the two coils of the LMM (bias and activation). The total absorbed current is less than 2 A, which results in the reduction of Joule losses. Moreover, a PWM source is provided to power and control a set of three Peltier elements aimed at cooling the device. The experiments validate the design of the LMM, which elicits it to power and control devices that may modulate fuel injection for rocket engines or for machines used to adjust positioning on circumterrestrial orbits.