Sai-Weng Sin

Prof. Dr. Sai-Weng Sin

State-Key Laboratory of Analog and Mixed-Signal VLSI, Department of Electrical and Computer Engineering, University of Macau, Macao, China
orcid

Research Focus & Metrics

Academic Career Length

21Years (2006-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 January 2019 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
BWBiao Wang
Biao Wang
Sai-Weng SinSai-Weng Sin
Sai-Weng Sin
SUSeng-Pan U.
Seng-Pan U.
FMFranco Maloberti
Franco Maloberti
RMRui P. Martins
Rui P. Martins
This paper presents an incremental analog-to-digital converter (IADC) with a two-phase linear-exponential accumulation loop. In the linear phase, the loop works as a first-order structure. The noise-coupling (NC) path is then enabled in the exponential phase thus boosting the signal-to-quantization-noise ratio (SQNR) exponentially with a few number of clock cycles. The two-phase scheme combines the advantages of the thermal noise suppression in the first-order IADC and SQNR boosting in the exponential mode. The uniform-exponential weight function allows the data weighted averaging (DWA) technique to work well, leading to the rotation of the multi-bit DAC mismatch error. Meanwhile, this scheme does not destroy the notches, which can be utilized to suppress the line noise. Implemented in 65-nm CMOS under 1.2-V supply, the analog-to-digital converter (ADC) achieves an signal-to-noise + distortion ratio (SNDR)/dynamic range (DR) of 100.8 dB/101.8 dB with 20-kHz bandwidth (BW), 550 μW, and 0.134 mm², resulting in Walden/Schreier FoMW/FoMS of 153 fJ/176.4 dB, respectively. The differential and integral nonlinearities are +0.27 LSB/-0.27 LSB and +0.84 LSB/-0.81 LSB, respectively.

21 October 2019 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
MGMingqiang Guo
Mingqiang Guo
JMJiaji Mao
Jiaji Mao
Sai-Weng SinSai-Weng Sin
Sai-Weng Sin
HWHegong Wei
Hegong Wei
RMRui P. Martins
Rui P. Martins
This article presents a split time-interleaved (TI) successive-approximation register (SAR) analog-to-digital converter (ADC) with digital background timing-skew mismatch calibration. It divides a TI-SAR ADC into two split parts with the same overall sampling rate but different numbers of TI channels. Benefitting from the proposed split TI topology, the timing-skew calibration convergence speed is fast without any extra analog circuits. The input impedance of the overall TI-ADC remains unchanged, which is essential for the preceding driving stage in a high-speed application. We designed a prototype seven-/eight-way split TI-ADC implemented in 28-nm CMOS. After a digital background timing-skew calibration, it reaches a 54.2-dB signal-to-noise-and-distortion ratio (SNDR) and 67.1-dB spurious free dynamic range (SFDR) with a near Nyquist rate input signal and a 2.5-GHz effective resolution bandwidth (ERBW). Furthermore, the power consumption of ADC core (mismatch calibration off-chip) is 12.2-mW running at 1.6 GS/s, leading to a Walden figure-of-merit (FOM) of 18.2 fJ/conv.-step and a Schreier FOM of 162.4 dB, respectively.

8 October 2019 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
LQLiang Qi
Liang Qi
AJAnkesh Jain
Ankesh Jain
DJDongyang Jiang
Dongyang Jiang
Sai-Weng SinSai-Weng Sin
Sai-Weng Sin
RMRui P. Martins
Rui P. Martins
MOMaurits Ortmanns
Maurits Ortmanns
This article presents a dual-loop noise-coupling (NC)-assisted continuous-time (CT) sturdy multistage noise-shaping (SMASH) Δ Σ modulator (DSM), employing 1.5-bit/4-bit quantizers. The proposed SMASH can equivalently work as an overall fourth-order DSM with 4-bit internal quantization. The NC applied in this CT SMASH DSM whitens the 1.5-bit quantization noise (QN) and further reduces its in-band tone power, while a finite-impulse response (FIR) filter integrated into the outermost feedback path suppresses the out-of-band (OOB) noise power of the multibit digital-to-analog converter (DAC) input. Together, they avoid any linearization technique for the multibit DAC. Sampled at 1.2 GHz, the 28-nm CMOS experimental prototype measures a signal-to-noise-and-distortion ratio (SNDR) of 76.6 dB and a spurious-free dynamic range (SFDR) of 87.9 dB over a 50-MHz bandwidth (BW), consuming 29.2 mW from 1.2-V/1.5-V supplies and occupying an active area of 0.085 mm². It exhibits a Schreier figure-of-merit (FoM) (SNDR) of 168.9 dB.

10 July 2020 in IEEE Transactions on Circuits and Systems I: Regular Papers
Verified
Journal Article
Closed access
WZWen-Liang Zeng
Wen-Liang Zeng
YRYuan Ren
Yuan Ren
Chi-Seng LamChi-Seng Lam
Chi-Seng Lam
Sai-Weng SinSai-Weng Sin
Sai-Weng Sin
WCWeng-Keong Che
Weng-Keong Che
RMRui Paulo Martins
Rui Paulo Martins
An ultra-low quiescent current dual-mode buck converter system is designed for IoT application, which includes a double clock time (DCT) and a pulse-width-modulation (PWM) control modes. The proposed DCT mode can reduce the conversion loss over a wide loading range from nA-to-mA and achieve seamless mode transition from DCT to PWM control. Implemented in a 0.18μm CMOS, this converter achieves a peak efficiency of 92.7%/94.7% in DCT/PWM and >80% efficiency from 10 μ A to 50 mA (5000x), with a wide input voltage from 2 V to 5 V. A quiescent current of 470 nA including bandgap voltage reference and internal oscillator is achieved. The DCT-to-PWM mode selection mechanism achieves an undershoot of 80 mV at 11 μs recovery time when load current jumps from 6.67 μA to 50 mA.

30 August 2022 in IEEE Transactions on Circuits and Systems I: Regular Papers
Verified
Journal Article
Closed access
DZDanfeng Zhai
Danfeng Zhai
WJWenning Jiang
Wenning Jiang
XJXinru Jia
Xinru Jia
JLJingchao Lan
Jingchao Lan
MGMingqiang Guo
Mingqiang Guo
CCChixiao Chen
Chixiao Chen
This paper presents a neural network-based digital calibration algorithm for high-speed and time-interleaved (TI) ADCs. In contrast with prior methods, the proposed work features joint amplitude-dependent and phase-dependent nonlinear distortion correction without prior-knowledge of ADC architecture feature. A dynamic calibration is first used to compensate for phase-dependent distortion. Two training optimizations, including a sub-range-sample-based batch schemes and a recursive foreground co-calibration flow are proposed to reduce the error and overfitting and further save hardware resources. A practical calibration engine is also investigated for interleaved ADCs with distributed weight and shared weight methods. To demonstrate the effectiveness of the method, the calibration engine is verified by two fabricated ADC prototypes, a 5 GS/s 16-way interleaved ADC and a 625 MS/s interleaving-SAR assisted pipeline ADC. Measurement results show that SFDR is improved between 16.9dB and 36.4dB before and after calibration for different frequency inputs. To trade-off between accuracy and power consumption, a quantized and pruned engine is implemented on both FPGA and 28nm CMOS technology. Experimental results show that the dedicated calibration on silicon consumes 8.64mW with 0.9V power supply at 333MHz clock rate. Measurement results show that the quantized hardware implementation has only 0.4-4 dB loss in SFDR.

28 September 2022 in IEEE Internet of Things Journal
Verified
Journal Article
Closed access
YWYa-Jie Wu
Ya-Jie Wu
RBRicardo Brito
Ricardo Brito
WCWai-Hei Choi
Wai-Hei Choi
Chi-Seng LamChi-Seng Lam
Chi-Seng Lam
MWMan-Chung Wong
Man-Chung Wong
RMRui Paulo Martins
Rui Paulo Martins
Smart meter monitors electricity consumption through modern metering devices connected to the Internet via Internet of Things (IoT) technology, which can provide intelligent and fast applications on-site such as arc fault protection based on nonintrusive monitoring load classification with fast safety responses for varying electric loads. Traditional three, four, and five layers of the IoT architecture cannot support such fast responses under loading variation. This article aims to propose six layers of IoT Cloud-Edge Infrastructure equipped with a reconfigurable mixed-signal controller as a smart meter platform for adaptation to different environments and, for example, deal with fast arc fault detection corresponding to different load characteristics. Such an architecture can reduce the processing time for safety, reduce bandwidth for communication, improve arc detection accuracy under different loading environments, and lower the overall computation cost.