The reliability instability of inhomogeneous Schottky contact behaviors of Ni/Au and Pt/Ti/Pt/Au gate contacts on AlGaN/GaN high-electron-mobility transistors (HEMTs) was investigated via off-state stress and temperature. Under the off-state stress condition, Pt/Ti/Pt/Au HEMT showed abruptly reduced reverse leakage current, which improved the Schottky barrier height (SBH) from 0.46 to 0.69 eV by suppression of the interfacial donor state. As the temperature increased, the reverse leakage current of the Pt/Ti/Pt/Au AlGaN/GaN HEMT at 308 K showed more reduction under the same off-state stress condition while that of the Ni/Au AlGaN/GaN HEMT increased. However, with temperatures exceeding 308 K under the same off-state stress conditions, the reverse leakage current of the Pt/Ti/Pt/Au AlGaN/GaN HEMT increases, which can be intensified using the inverse piezoelectric effect. Based on this phenomenon, the present work reveals the necessity for analyzing the concurrent SBH and reliability instability due to the interfacial trap states of the MS contacts.
We presented an explicit empirical model of the thermal resistance of AlGaN/GaN high-electron-mobility transistors on three distinct substrates, including sapphire, SiC, and Si. This model considered both a linear and non-linear thermal resistance model of AlGaN/GaN HEMT, the thickness of the host substrate layers, and the gate length and width. The non-linear nature of channel temperature—visible at the high-power dissipation stage—along with linear dependency, was constructed within a single equation. Comparisons with the channel temperature measurement procedure (DC) and charge-control-based device modeling were performed to verify the model’s validity, and the results were in favorable agreement with the observed model data, with only a 1.5% error rate compared to the measurement data. An agile expression for the channel temperature is also important for designing power devices and monolithic microwave integrated circuits. The suggested approach provides several techniques for investigation that could otherwise be impractical or unattainable when utilizing time-consuming numerical simulations.
We present the mean time to failure (MTTF) of on-wafer AlGaN/GaN HEMTs under two distinct electric field stress conditions. The channel temperature (Tch) of the devices exhibits variability contingent upon the stress voltage and power dissipation, thereby influencing the long-term reliability of the devices. The accuracy of the channel temperature assumes a pivotal role in MTTF determination, a parameter measured and simulated through TCAD Silvaco device simulation. Under low electric field stress, a gradual degradation of IDSS is noted, accompanied by a negative shift in threshold voltage (ΔVT) and a substantial increase in gate leakage current (IG). Conversely, the high electric field stress condition induces a sudden decrease in IDSS without any observed shift in threshold voltage. For the low and high electric field conditions, MTTF values of 360 h and 160 h, respectively, were determined for on-wafer AlGaN/GaN HEMTs.
We present the mean-time-to-failure (MTTF) calculations for AlGaN/GaN high-electron-mobility transistors (HEMTs) using two independent acceleration factors. MTTF predictions are generally calculated through the Arrhenius relationship, based on channel temperature and acceleration, depend only on one parameter. Although the failure modes of the AlGaN/GaN HEMTs depend largely on the applied electric fields, the Eyring model is introduced to investigate both voltage and temperature dependent degradation of AlGaN/GaN devices. In anticipation of adequate MTTF values, studies were conducted on non-commercial devices. Further, we distinguished the cumulative failure percentages through the Weibull and log-normal distributions. We also explored the increase in gate leakage current at high temperatures for early device deterioration.
This paper presents a novel approach to the efficient extraction of parasitic resistances in high electron mobility transistors (HEMTs). The study reveals that the gate resistance value can be accurately determined under specific forward gate bias conditions (Vg = 1.0 V), although the gate resistance value becomes unreliable beyond this threshold (Vg > 1.0 V) due to potential damage to the Schottky contact. Furthermore, by examining the characteristics of the device under a cold-FET bias condition (Vds = 0 V), a linear correlation between the gate and drain current is identified, enabling an estimation of the interdependence between the drain and source resistance using the proposed method. The estimation of parasitic pad capacitance (Cpg and Cpd) from Dambrine’s model is refined by incorporating the depletion layer capacitance on the gate side during the pinch-off condition. To validate the accuracy of the extracted parasitic capacitance and resistance values obtained from the new method, small-signal modeling is performed on a diverse range of measured devices.
In this study, we present a detailed analysis of trapping characteristics at the AlxGa1−xN/GaN interface of AlxGa1−xN/GaN high-electron-mobility transistors (HEMTs) with reliability assessments, demonstrating how the composition of the Al in the AlxGa1−xN barrier impacts the performance of the device. Reliability instability assessment in two different AlxGa1−xN/GaN HEMTs [x = 0.25, 0.45] using a single-pulse ID–VD characterization technique revealed higher drain-current degradation (∆ID) with pulse time for Al0.45Ga0.55N/GaN devices which correlates to the fast-transient charge-trapping in the defect sites near the interface of AlxGa1−xN/GaN. Constant voltage stress (CVS) measurement was used to analyze the charge-trapping phenomena of the channel carriers for long-term reliability testing. Al0.45Ga0.55N/GaN devices exhibited higher-threshold voltage shifting (∆VT) caused by stress electric fields, verifying the interfacial deterioration phenomenon. Defect sites near the interface of the AlGaN barrier responded to the stress electric fields and captured channel electrons—resulting in these charging effects that could be partially reversed using recovery voltages. The quantitative extraction of volume trap density (Nt) using 1/f low-frequency noise characterizations unveiled a 40% reduced Nt for the Al0.25Ga0.75N/GaN device, further verifying the higher trapping phenomena in the Al0.45Ga0.55N barrier caused by the rougher Al0.45Ga0.55N/GaN interface.