Giada Marchi

Dr. Giada Marchi

Center for Sensors and Devices, Fondazione Bruno Kessler, Trento, Trentino-Alto Adige, Italy
orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 April 2024 in Sensors
Verified
Journal Article
Open access
PDF file
VMViviana Mulloni
Viviana Mulloni
Giada MarchiGiada Marchi
Giada Marchi
AGAndrea Gaiardo
Andrea Gaiardo
MVMatteo Valt
Matteo Valt
Massimo DonelliMassimo Donelli
Massimo Donelli
Leandro LorenzelliLeandro Lorenzelli
Leandro Lorenzelli
Packaging solutions have recently evolved to become smart and intelligent thanks to technologies such as RFID tracking and communication systems, but the integration of sensing functionality in these systems is still under active development. In this paper, chipless RFID humidity sensors suitable for smart packaging are proposed together with a novel strategy to tune their performances and their operating range. The sensors are flexible, fast, low-cost and easy to fabricate and can be read wirelessly. The sensitivity and the humidity range where they can be used are adjustable by changing one of the sensor’s structural parameters. Moreover, these sensors are proposed as double parameter sensors, using both the frequency shift and the intensity variation of the resonance peak for the measure of the relative humidity. The results show that the sensitivity can vary remarkably among the sensors proposed, together with the operative range. The sensor suitability in two specific smart packaging applications is discussed. In the first case, a threshold sensor in the low-humidity range for package integrity verification is analyzed, and in the second case, a more complex measurement of humidity in non-hermetic packages is investigated. The discussion shows that the sensor configuration can easily be adapted to the different application needs.

20 November 2021 in Electronics
Verified
Journal Article
Open access
PDF file
Giada MarchiGiada Marchi
Giada Marchi
VMViviana Mulloni
Viviana Mulloni
OAOmar Hammad Ali
Omar Hammad Ali
Leandro LorenzelliLeandro Lorenzelli
Leandro Lorenzelli
Massimo DonelliMassimo Donelli
Massimo Donelli
This study is supposed to introduce a valid strategy for increasing the sensitivity of chipless radio frequency identification (RFID) encoders. The idea is to properly select the dielectric substrate in order to enhance the contribution of the sensitive layer and to maximize the frequency shift of the resonance peak. The specific case of a chipless sensor suitable for the detection of humidity in low-humidity regimes will be investigated both with numerical and experimental tests.

27 January 2023 in Sensors
Verified
Journal Article
Open access
PDF file
Giada MarchiGiada Marchi
Giada Marchi
VMViviana Mulloni
Viviana Mulloni
Fabio AcerbiFabio Acerbi
Fabio Acerbi
Massimo DonelliMassimo Donelli
Massimo Donelli
Leandro LorenzelliLeandro Lorenzelli
Leandro Lorenzelli
Chipless radio-frequency identification (RFID) sensors are not yet widespread in practical applications because of their limited sensitivity and selectivity when compared to more mature sensing technologies. The search for a suitable material to perform the sensing function has often been focused on the most common materials used in electrochemical sensing approaches, but little work has been done to directly relate the performances of chipless or microwave sensors to the characteristics of the materials used to fabricate them. In this work we are simulating the impact of the substrate material on the performances of a chipless RFID sensor for humidity detection. The dielectric parameters of the substrate material turn out to be very important to maximize the sensor performances, in relation to the operative range of the sensor (based on the desired application) and to the effective dielectric properties of the sensitive material used, we verify the simulated results with measurements of real chipless humidity cells with Nafion 117 sensitive material. We show which types of substrate are preferable for low-humidity detection and which substrates’ features are instead fundamental to operate in a wider humidity range.

20 July 2023 in Chemosensors
Verified
Journal Article
Open access
PDF file
VMViviana Mulloni
Viviana Mulloni
AGAndrea Gaiardo
Andrea Gaiardo
Giada MarchiGiada Marchi
Giada Marchi
MVMatteo Valt
Matteo Valt
LVLia Vanzetti
Lia Vanzetti
Leandro LorenzelliLeandro Lorenzelli
Leandro Lorenzelli
NO2 is an important environmental pollutant and is harmful to human health even at very low concentrations. In this paper, we propose a novel chipless RFID sensor able to work at room temperature and to detect sub-ppm concentration of NO2 in the environment. The sensor is made of a metallic resonator covered with NO2-sensitive tin oxide and works by monitoring both the frequency and the intensity of the output signal. The experimental measurements show a fast response (a few minutes) but a very slow recovery. The sensor could therefore be used for non-continuous threshold monitoring. However, we also demonstrated that the recovery can be strongly accelerated upon exposure to a UV source. This opens the way to the reuse of the sensor, which can be easily regenerated after prolonged exposure and recycled several times.

27 February 2023 in IEEE Journal on Flexible Electronics
Verified
Journal Article
Closed access
Giada MarchiGiada Marchi
Giada Marchi
EZEnrico Zanazzi
Enrico Zanazzi
VMViviana Mulloni
Viviana Mulloni
Massimo DonelliMassimo Donelli
Massimo Donelli
LLLeandro Lorenzelli
Leandro Lorenzelli
Inkjet printing fabrication techniques can be used for the manufacturing process of chipless radio-frequency identification RFID sensors. With respect to traditional silicon-based fabrication, flexible electronics induce the possibility to experiment new substrates and conductive materials. With the development of high-conductive nano-inks the low sintering temperature required to process them results compatible with a large variety of substrates. However, the requirements for the conductivity of the metallized printed patterns are particularly stringent for applications where the working frequency is high, like in the case of common chipless RFID tags working in the frequency range 3-10GHz. In chipless RFID systems, the higher the conductivity of the conductive parts and the better the signal response of the tag. However, in printed chipless RFIDs the conductivity can only give a partial indication of the goodness of the tag. The tag response is dependent on the sheet resistance, which is not only related to the conductivity of the ink but also to the thickness of the printed pattern. Therefore, if a sufficiently high-conductive nano-ink is selected, the signal efficiency of the printed tag can be further improved by making an evaluation based on the thickness of the patterns. The objective of this study is to propose a strategy for evaluating the signal response efficiency in inkjet-printed chipless tags by means of a first quantification of the average thickness of the printed layer, which is used to feed a finite element method simulation model to give the manufacturer an idea of the optimal number of layers to be printed in order to have a strong signal response.

26 February 2022 in Electronics
Verified
Journal Article
Open access
PDF file
VMViviana Mulloni
Viviana Mulloni
Giada MarchiGiada Marchi
Giada Marchi
Leandro LorenzelliLeandro Lorenzelli
Leandro Lorenzelli
Massimo DonelliMassimo Donelli
Massimo Donelli
The paper presents a new methodology to assess the ethanol content in water solutions. The system exploits a microwave resonator embedded in a polycarbonate sampling cell. The resonator frequency depends on the ethanol percentage and is monitored in real-time through a non-contacting probe. The method shows a precision better than 1% in ethanol percentage in the range of 1–30%, but can be applied also outside this range. Moreover, the methodology can be further improved or adapted for the analysis of other types of aqueous solutions or liquid mixtures upon evaluation of their dielectric properties.