Amorphous alloy is an emerging metal material, and its unique atomic arrangement brings it the excellent properties of high strength and high hardness, and, therefore, have attracted extensive attention in the fields of electronic information and cutting-edge products. Their applications involve machining and forming, make the machining performance of amorphous alloys being a research hotspot. However, the present research on amorphous alloys and their machining performance is widely focused, especially for Fe-based amorphous alloys, and there lacks a systematic review. Therefore, in the present research, based on the properties of amorphous alloys and Fe-based amorphous alloys, the fundamental reason and improvement method of the difficult-to-machine properties of Fe-based amorphous alloys are reviewed and analyzed. Firstly, the properties of amorphous alloys are summarized, and it is found that crystallization and high temperature in machining are the main reasons for difficult-to-machine properties. Then, the unique properties, preparation and application of Fe-based amorphous alloys are reviewed. The review found that the machining of Fe-based amorphous alloys is also deteriorated by extremely high hardness and chemical tool wear. Tool-assisted machining, low-temperature lubrication assisted machining, and magnetic field-assisted machining can effectively improve the machining performance of Fe-based amorphous alloys. The combination of assisted machining methods is the development trend in machining Fe-based amorphous alloys, and even amorphous alloys in the future. The present research provides a systematic summary for the machining of Fe-based amorphous alloys, which would serve as a reference for relevant research.

Applications of a metallic material highly depend on its mechanical properties, which greatly depend on the material’s grain sizes. Reducing grain sizes by severe plastic deformation is one of the efficient approaches to enhance the mechanical properties of a metallic material. In this paper, severe plastic deformation of equal channel angular pressing (ECAP) will be reviewed to illustrate its effects on the grain refinement of some common metallic materials such as titanium alloys, aluminum alloys, and magnesium alloys. In the ECAP process, the materials can be processed severely and repeatedly in a designed ECAP mold to accumulate a large amount of plastic strain. Ultrafine grains with diameters of submicron meters or even nanometers can be achieved through severe plastic deformation of the ECAP. In detail, this paper will give state-of-the-art details about the influences of ECAP processing parameters such as passes, temperature, and routes on the evolution of the microstructure of metallic materials. The evolution of grain sizes, grain boundaries, and phases of different metallic materials during the ECAP process are also analyzed. Besides, the plastic deformation mechanism during the ECAP process is discussed from the perspectives of dislocation slipping and twinning.

With the increasing demand for high-specific-strength materials for high-temperature applications, particularly in the aerospace field, novel (TiVCrZr)_100−xW_x (x = 5, 10, 15 and 20) refractory high-entropy alloys (RHEAs) were developed. The phase formation, microstructure, and mechanical properties were studied. The (TiVCrZr)_100−xW_x RHEAs exhibit a relatively high specific strength and low density compared with the W-containing RHEAs and most of the W-free RHEAs. In (TiVCrZr)_100−xW_x RHEAs, Laves, BCC and Ti-rich phases are formed, where the Laves phase is the major phase, and the volume fraction of the BCC phase increases with increasing W content. (TiVCrZr)_100−xW_x RHEAs exhibit dendrite structures, where W is enriched in the dendrite region, and increasing W-rich precipitations corresponding to the BCC phase are observed. The improvement of the strength and hardness of RHEAs is mainly attributed to the evolution of the microstructure and corresponding strengthening effect of W. The empirical parameters and calculated phase diagram were investigated, which further explain and verify the formation and variation of phases. The present findings give more insights into the formation of multi phases in (TiVCrZr)_100−xW_x RHEAs, and explore their application potential in the aerospace industry and nuclear reactors due to their high specific strength and low-activation constituent elements.

Using supercritical CO₂ as a heat transfer fluid in microchannel receivers is a promising alternative for tower concentrating solar power plants. In this paper, the heat transfer and flow characteristics of supercritical CO₂ in microchannels at high temperature are investigated by numerical simulations. The effects of microchannel structure, mass flow rate, heat flux, pressure, inlet temperature and radiation are analyzed and discussed. The results show that higher mass flow rate obtains poorer heat transfer performance with larger flow resistance of supercritical CO₂ in microchannels at high temperature. The fluid and wall temperatures, average heat transfer coefficient and pressure drop all increase nearly linearly with the increases in heat flux and inlet temperature in the high-temperature region. Moreover, high pressure contributes to great hydraulic performance with approximate thermal performance. The effect of radiation on thermal performance is more pronounced than that on hydraulic performance. Furthermore, the optimized structures of inlet and outlet headers, as well as those of the multichannel in the microchannels, are proposed to obtain good temperature uniformity in the microchannels with relatively low pressure drop. The results given in the current study can be conducive to the design and application of microchannel receivers with supercritical CO₂ as a heat transfer fluid in the third generation of concentrating solar power plants.