We show that x-ray phase contrast images of some objects with a small cross-section diameter d satisfy a condition for a far-field approximation d ≪ r1 where r1 = (λz)1/2, λ is the x-ray wavelength, z is the distance from the object to the detector. In this case the size of the image does not match the size of the object contrary to the edge detection technique. Moreover, the structure of the central fringes of the image is universal, i.e. it is independent of the object cross-section structure. Therefore, these images have no detailed information on the object.
[[abstract]]Micropipe bundling and twisting in SiC crystals was revealed using synchrotron x-ray phase sensitive radiography. The computer simulation of micropipe evolution during the crystal growth suggests that the bundled and twisted micropipes arise under the influence of stress fields from other neighboring micropipes. The annihilation of twisted dipoles is attributed to their transformation into semiloops. Reactions of micropipe coalescence lead to the generation of micropipes and/or the annihilation of initial micropipes, resulting in the decrease in their average density.[[fileno]]2060117010113[[department]]工程與系統科學
The physical vapor transport growth of aluminium nitride (AlN) layers was performed in one process with the evaporation of silicon carbide (SiC) substrates. In this paper, we show that the rate of SiC evaporation is slow in a narrow process window for AlN growth but increases in the presence of AlN vapor. The properties of the substrates influence the evaporation process; therefore an investigation is done to understand this phenomenon. We first describe the evaporation behavior of a SiC substrate depending on its size, thickness, structure and polarity. Then we demonstrate the surface morphology and structural quality of the AlN layers grown on C-polar SiC. In the case of a step-flow growth, our method allows us to obtain thin freestanding layers with moderate dislocation densities and rocking curve widths comparable to those of bulk crystals.
The correlation between the microscopic lattice plane curvature and the dislocation structure in thermal warpage of 200 mm-diameter Czochralski Si (001) wafers has been investigated using high-resolution X-ray diffractometry and topography. It is found that the (004) lattice plane curvature is locally confined between two neighboring slip bands, with the rotation axis parallel to the slip bands. High-resolution topography reveals that the curvature resulted from a fragmented dislocation structure. The local confinement is attributed to the multiplication of the dislocations that are generated between the two slip bands.
X-ray topography is a group of methods for obtaining diffraction images of structural defects in crystals. Among them, section topography techniques are distinguished by their abilities in acquiring quantitative information about defects based on the analysis of the images. For this purpose, special applications of the dynamic theory of X-ray diffraction are being developed. The interference of wave fields excited in a crystal by an X-ray beam is the basis of the section methods. Their sensitivity to weak lattice distortions is much higher than that of other X-ray methods. This review describes the physical foundations and implementation of the section topography techniques, as well as the results of computer simulating the wave field in a crystal. We present some examples of solving materials science and microelectronics problems and briefly describe the section topography using synchrotron radiation. Keywords: X-ray topography, single crystals, defects in crystals, silicon, diamond, indium antimonide.