College of Civil Engineering and Architecture, Zhejiang University/University of Illinois at Urbana-Champaign (ZJU-UIUC) Institute, International Campus Zhejiang University, Haining, China
Prof. Dr. Demartino Cristoforo
College of Civil Engineering and Architecture, Zhejiang University/University of Illinois at Urbana-Champaign (ZJU-UIUC) Institute, International Campus Zhejiang University, Haining, China
Standards and Codes of Practice for designing new constructions and for assessing and strengthening existing ones are usually based on uniform hazard maps, where different Limit States (LSs) are associated with different hazard-exceedance probabilities. This approach yields non-homogeneous LS-exceedance probabilities across a territory, thus failing to achieve the goal of uniform risk throughout a territory. Such lack of uniformity stems from estimating the probability of failure using capacity and demand models. If the capacity of new constructions—or the capacity increase of strengthened existing constructions—are designed based on a prescribed hazard-exceedance probability, then the seismic risk depends on both the structure (depending on the design philosophy and corresponding design objectives), through the capacity model, and the location, through the hazard model. The aim of this study is threefold. First, it provides a seismic probability assessment formulation and a risk-targeted intensity measure based on a linear model in log–log coordinates of the hazard, under the assumption of log-normal capacity and demand. The proposed framework introduces a factor that multiplies the code hazard-based demand to account either for intentional (from design) over-capacity or for undesired (e.g., in existing constructions) under-capacity. Second, this paper shows an application to peak ground accelerations in Europe considering parameters taken from Standards and Codes of Practice. The developed framework is used to determine the risk-target levels of peak ground acceleration used for design in Europe, for both new and existing constructions. Third, the obtained target risk levels are used to determine a risk-based intensity modification factor and a risk-based mean return period modification factor, which can be readily implemented in current Standards to achieve risk-targeted design actions, with equal LS-exceedance probability across the territory. The framework is independent of the chosen hazard-based intensity measure, be it the commonly used peak ground acceleration or any other measure. The results highlight that in large areas of Europe the design peak ground acceleration should be increased to achieve the proposed seismic risk target and that this is particularly significant for existing constructions, given their larger uncertainties and typical low capacity with respect to the code hazard-based demand.
The present work is meant at contributing to the innovation of the current methodologies for pedestrian bridge monitoring. Specifically, the use of vibrational energy harvesters for self-powered wireless structural monitoring of footbridges is here advanced for the first time, and a novel sensorless strategy is also proposed to survey remotely their serviceability conditions. In this perspective, comprehensive computer-aided numerical investigations are initially conducted to obtain statistical estimates of the electrical energy generated from a composite piezoelectric cantilever beam subjected to the vertical footbridge response under the passage of walkers. In doing so, randomness related to the pedestrians' dynamics and footbridges with different modal features are taken into account. An investigation based on experimental data is finally presented. In detail, one case study is concerned with a footbridge prone to large vibrations due to quasi pedestrian–structure resonance condition while the second one deals with a stiffer footbridge experiencing low excitation levels. Ultimately, this study indicates that energy harvesting from vertical pedestrian-induced vibrations can be a promising strategy for footbridges monitoring, and it provides useful design guidelines in this regard.
20 November 2023 in Earthquake Engineering & Structural Dynamics
This study proposes a general reduced vehicle model for simulating truck-bridge pier collisions. The model was calibrated using high-fidelity finite element (FE) simulations based on LS-DYNA of three types of trucks (i.e., light, medium, and heavy) impacting with rigid bridge piers. Key parameters influencing the vehicular impact force, such as cross-sectional types and dimensions of piers, truck mass, impact velocity, and impact angle, etc., were systematically examined and included into the reduced model. Based on the FE simulation results, a multi-parameter nonlinear fitting of the parameters of the reduced vehicle model was performed. Finally, the general reduced vehicle model was coupled with elastic piers modelled by beam elements to perform coupled dynamic analysis, and the analysis results were compared with the FE simulation results. The results showed that the truck-pier coupling analysis method based on the above general reduced vehicle model can accurately reproduce at a significantly reduced computational cost the key parameters such as the impact force, pier deflection, cross-sectional bending moment and shear force, etc.