Markus Limbach

Mr. Markus Limbach

German Aerospace Center; Microwaves and Radar Institute
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 May 2020 in Remote Sensing
Verified
Journal Article
Open access
PDF file
Andreas ReigberAndreas Reigber
Andreas Reigber
ESEric Schreiber
Eric Schreiber
KTKurt Trappschuh
Kurt Trappschuh
SPSebastian Pasch
Sebastian Pasch
GMGerhard Müller
Gerhard Müller
Alberto MoreiraAlberto Moreira
Alberto Moreira
Synthetic Aperture Radar (SAR) is an established remote sensing technique that can robustly provide high-resolution imagery of the Earth’s surface. However, current space-borne SAR systems are limited, as a matter of principle, in achieving high azimuth resolution and a large swath width at the same time. Digital beamforming (DBF) has been identified as a key technology for resolving this limitation and provides various other advantages, such as an improved signal-to-noise ratio (SNR) or the adaptive suppression of radio interference (RFI). Airborne SAR sensors with digital beamforming capabilities are essential tools to research and validate this important technology for later implementation on a satellite. Currently, the Microwaves and Radar Institute of the German Aerospace Center (DLR) is developing a new advanced high-resolution airborne SAR system with digital beamforming capabilities, the so-called DBFSAR, which is planned to supplement its operational F-SAR system in near future. It is operating at X-band and features 12 simultaneous receive and 4 sequential transmit channels with 1.8 GHz bandwidth each, flexible DBF antenna setups and is equipped with a high-precision navigation and positioning unit. This paper aims to present the DBFSAR sensor development, including its radar front-end, its digital back-end, the foreseen DBF antenna configuration and the intended calibration strategy. To analyse the status, performance, and calibration quality of the DBFSAR system, this paper also includes some first in-flight results in interferometric and multi-channel marine configurations. They demonstrate the excellent performance of the DBFSAR system during its first flight campaigns.

8 April 2021 in Remote Sensing
Verified
Journal Article
Open access
PDF file
DCDiego Lorente Catalan
Diego Lorente Catalan
MLMarkus Limbach
Markus Limbach
BGBernd Gabler
Bernd Gabler
Héctor GonzálezHéctor González
Héctor González
VBVicente E. Boria
Vicente E. Boria
In this work, a novel rotation approach for the antenna elements of a linear phased array is presented. The proposed method improves by up to 14 dB the cross-polarization level within the main beam by performing a sequential 90° rotation of the identical array elements, and achieving measured cross-polarization suppressions of 40 dB. This configuration is validated by means of simulation and measurements of a manufactured linear array of five dual-polarized cavity-box aperture coupled stacked patch antennas operating in L-Band, and considering both uniform amplitude and phase distribution and beamforming with amplitude tapering. The analysis is further extended by applying and comparing the proposed design with the 180° rotation and non-rotation topologies. This technique is expected to be used for the next generation L-Band Airborne Synthetic Aperture Radar Sensor of the German Aerospace Center (DLR).

25 December 2023 in IEEE Access
Verified
Journal Article
Open access
DCDiego Lorente Catalan
Diego Lorente Catalan
MLMarkus Limbach
Markus Limbach
BGBernd Gabler
Bernd Gabler
Héctor GonzálezHéctor González
Héctor González
VBVicente E. Boria
Vicente E. Boria
Synthetic Aperture Radar (SAR) has become, nowadays, one of the most important techniques in remote-sensing, and the increasing interest in Earth monitoring reinforces this trend. Next generation SAR sensors will enhance the radar resolution capabilities by means of digital beamforming (DBF) techniques along with multistatic systems. In order to support the technological development of future spaceborne SAR missions, airborne sensors become an essential scope of research. Thereby, future airborne SAR systems demand enhanced DBF capabilities that involve phased array antennas with a high density of array elements. However, the antenna aperture size is significantly limited in airborne applications, which leads to low-profile and highly integrated antenna solutions, becoming a more challenging task for lower frequency operations such as L-band. In this work, a compact L-band dual-polarized multilayer phased array antenna with beam steering in elevation, developed for the next generation German Aerospace Center (DLR) airborne SAR system, is presented. The proposed design makes use of truncated cavities to improve the array element isolation, and provides 66% more antenna elements than the previous L-band phased array of the current DLR airborne SAR sensor with the same antenna aperture size. Measurements of a manufactured prototype show an antenna bandwidth of almost 20%, matching levels better than 17 dB, up to 15 dB gain and cross-polarization suppression values higher than 35 dB. Thus, the proposed work will allow the application of advanced DBF techniques in the upcoming first pulsed bistatic L-band airborne SAR sensor.

26 February 2025 in IEEE Access
Verified
Journal Article
Open access
ASAlicja Schreiber
Alicja Schreiber
MLMarkus Limbach
Markus Limbach
BGBernd Gabler
Bernd Gabler
This paper presents the design of a fully polarimetric low-profile antenna array intended for use in a side-looking airborne synthetic aperture radar (SAR) sensor operating at Ka-band. The proposed antenna provides maximum gain of up to 23 dB, a low side lobe level and high cross-polarization suppression values exceeding 38 dB. Furthermore, the proposed antenna demonstrates robust behavior and stable electrical performance in a variety of environmental conditions encountered during the measurement campaigns. The antenna system was designed using slotted waveguide technology, comprising separate antenna arrays for each polarization, which were mounted side by side on the aircraft platform. An appropriate design was developed based on theoretical analysis, considering the specifications of the electrical and mechanical systems. The horizontally polarized antenna consists of four subarrays, each comprising 22 transverse slots cut into the narrow waveguide wall. The alternately placed iris pairs enable radiation. The antenna with vertically polarized radiation is realized through the implementation of four subarrays, comprising 18 longitudinal slots, situated within the broad waveguide wall. Appropriate feeding networks with unbalanced amplitude distributions were designed to feed both arrays. For the horizontally polarized antenna, a conventional H-plane T-junction power divider and a Bethe-hole directional waveguide coupler were used. In contrast, a two-stage H-plane T-junction with a non-uniform amplitude taper was applied for vertical polarization. The proposed design was validated by compact test range measurements, which demonstrated a very good agreement with the simulation results.

16 November 2021 in Remote Sensing
Verified
Journal Article
Open access
PDF file
ABAnna Maria Büchner
Anna Maria Büchner
KWKlaus Weidenhaupt
Klaus Weidenhaupt
BGBernd Gabler
Bernd Gabler
MLMarkus Limbach
Markus Limbach
MSMarco Schwerdt
Marco Schwerdt
In order to realize a compact L-band transponder design for the calibration of spaceborne synthetic aperture radar (SAR) systems, a novel antenna was developed by DLR. As with previous designs for different frequency bands, the future transponder is based on a two-antenna concept. This paper addresses the issue of antenna coupling between corrugated L-band horn antennas, which are operated in close proximity. The antenna coupling is analyzed via simulations and measurements by utilizing specifically defined coupling parameters. Additionally, improvements to further lower the mutual antenna coupling have been designed, tested, and are described in this paper.