Stretchable and self‐healing soft conductive materials are essential for soft electronics, robotics, wearables, and bioelectronics. However, achieving a single material that simultaneously offers high and stable conductivity, minimal resistance changes under extreme stretching, high‐resolution universal printability, autonomous self‐healing, and pressure‐sensitive adhesive properties for direct bonding of surface‐mountable components remains challenging. Here, a printable ink composed of liquid metal microparticles and carboxylic acid‐functionalized carbon nanotubes, blended into a bimodal supramolecular elastomer matrix is introduced. After photothermal activation, the material is capable of reorganizing conductive pathways and achieves a high conductivity (> 20000 S·cm −1 under strain), exceptional strain insensitivity (
R/R
0 < 3.95 up to 500%), and an elastic working range >700%. The reversible oxygen‐boron and hydrogen bonding enable both effective autonomous self‐healing and direct assembly of self‐healing hybrid electronic circuits and systems through self‐adhesiveness. To showcase the high performance and functionality, a highly stretchable, self‐healing, and waterproof 3 × 5 pixel display is fabricated.
Organic light emitting transistors (OLETs) combine, in the same device, the function of an electrical switch with the capability of generating light under appropriate bias conditions. In this work, we demonstrate how engineering the dielectric layer based on high-k polyvinylidene fluoride (PVDF)-based polymers can lead to a drastic reduction of device driving voltages and the improvement of its optoelectronic properties. We first investigated the morphology and the dielectric response of these polymer dielectrics in terms of polymer (P(VDF-TrFE) and P(VDF-TrFE-CFE)) and solvent content (cyclopentanone, methylethylketone). Implementing these high-k PVDF-based dielectrics enabled low-bias ambipolar organic light emitting transistors, with reduced threshold voltages (<20 V) and enhanced light output (compared to conventional polymer reference), along with an overall improvement of the device efficiency. Further, we preliminary transferred these fluorinated high-k dielectric films onto a plastic substrate to enable flexible light emitting transistors. These findings hold potential for broader exploitation of the OLET platform, where the device can now be driven by commercially available electronics, thus enabling flexible low-bias organic electronic devices.
2 January 2024 in Macromolecular Materials and Engineering
Soft and stretchable electronics represents a high potential paradigm shift in field of electronics, for example, in applications related to solar cells, organic displays, electronic skin, and wearable sensors. In this work, a soft and stretchable humidity‐insensitive thermoresistive sensor is developed using interdigitated electrodes made of silver‐plated nylon fabric coated with silver‐ink and a layer of poly(3,4‐ethylenedioxythiophene)–poly(styrene sulfonate) (PEDOT: PSS) embedded into elastomer. The mechanical and thermoelectrical properties of the soft sensor are characterized and analyzed. The fabricated soft sensor provides a combination of linear temperature sensitivity of 0.46% °C−1 with an R2 of 0.986 from 30 to 55 °C at 0% uniaxial tensile strain. It also exhibits excellent stability in environmental humidity ranging from ≈30% RH to ≈80% RH. The linear sensitivity is improved to 1.49% °C−1 by applying a 40% pre‐measurement stretch to the sensor. Due to its good temperature sensitivity (0.46 to 1.49% °C−1), excellent linearity (0.986), and high stretchability (≈125%), the soft and stretchable temperature sensor proves to be a very promising solution for wearable temperature sensing.
Insulating and conductive self‐healing elastomers represent a high‐potential paradigm shift in the development of soft radio‐frequency (RF) electronics applications, such as coplanar waveguide (CWP) RF transmission lines. In this article, we present a novel stretchable, self‐healing CPW RF transmission line that uses self‐healing materials for both the substrate and the conductor. The used self‐healing liquid metal elastomer composite achieves a conductivity of approximately 2000 S cm −1 at zero strain. S‐parameter measurements of reflection (
S
11 ) and transmission (
S
21 ) were performed for the coplanar waveguide as the electrical length was uniaxially stretched up to 100%. The stretchable and self‐healing CPW RF transmission lines maintain remarkable consistency in transmission response at 1–6 GHz when mechanically stretched at 0%–50% for 1000 stretch‐release cycles. To the best of our knowledge, this is the first proof‐of‐concept demonstration of a fully self‐healing CPW transmission line, paving the way for durable and reconfigurable soft RF devices.
Self-healing materials have emerged as key enablers for flexible and stretchable electronics, particularly in applications requiring resilience under repeated mechanical stress and autonomous recovery. In this work, we present the development and characterization of two fully self-healing passive UHF RFID elastomeric tag antennas, designed with diamond and elliptical slot geometries. Both antennas are fabricated on a soft self-healing elastomer substrate, and an electrically conductive liquid metal-based elastomer is employed as the conductive element. Compared to previous studies, a significant advancement in our work is the increase of the electrical conductivity of the self-healing radiator to ∼20 kS/m, which provides improved antenna impedance characteristics and proper radiation performance. Both antenna prototypes achieve read ranges between 5 to 6.7 m within the 860–960 MHz frequency band, aligning well with simulated results. Measurements after full antenna bisection show sub-minute recovery, with read range restored to 93–100% of the initial level within 60 seconds. The RFID chip is directly mounted onto the conductor without adhesives, preserving both electrical properties and mechanical recovery after physical damage. The attained results demonstrate the feasibility of constructing reliable and recoverable antenna systems entirely from self-healing materials and highlight their potential in the long-term deployment of soft and resilient wireless systems.
Soft electronics systems are increasingly dependent on direct integration of surface mount devices (SMD) to achieve advanced sensing, computing, and communication functions. Yet, a fundamental bottleneck for assembling highly deformable and durable electronics arises from an inability of the current bonding strategies to maintain stable electro‐mechanical interfaces, together with the inherent strain sensitivity of most soft conductors. Here, we introduce the strain‐insensitive, electrically conductive liquid metal elastomer (ECLME) that incorporates pressure‐sensitive adhesion and autonomous self‐healing to enable robust adhesion for soft electronic platforms. Photothermal activation of ECLME results in heterogeneous liquid metal microparticle‐rich pathways that deliver high conductivity (>20 000 S cm −1 under strain) and extreme stretchability (up to 600%) in fully assembled devices. Optimized self‐soldering interconnects that enable stable and reliable contact with SMDs, maintaining electrical performance under substantial deformation (
R/R
0 < 5 up to 400%) while providing strong mechanical adhesion (pull‐out strength ∼200 kPa). The SMD‐integrated interconnects further maintain ultralow resistance fluctuations during repeated stretching, demonstrating reliable cyclic performance. Together, these combined attributes establish ECLME interconnects as a scalable and practical interconnect platform for next‐generation soft electronic systems requiring mechanically resilient, high‐performance package and chip integration.