Synthetic Aperture Radar (SAR), as a microwave sensor that can sense a target all day or night under all-weather conditions, is of great significance for detecting water resources, such as coastlines, lakes and rivers. This paper reviews literature published in the past 30 years in the field of water body extraction in SAR images, and makes some proposals that the community working with SAR image waterbody extraction should consider. Firstly, this review focuses on the main ideas and characteristics of traditional water body extraction on SAR images, mainly focusing on traditional Machine Learning (ML) methods. Secondly, how Deep Learning (DL) methods are applied and optimized in the task of water-body segmentation for SAR images is summarized from the two levels of pixel and image. We also pay more attention to the most popular networks, such as U-Net and its modified models, and novel networks, such as the Cascaded Fully-Convolutional Network (CFCN) and River-Net. In the end, an in-depth discussion is presented, along with conclusions and future trends, on the limitations and challenges of DL for water-body segmentation.

Synthetic aperture radar (SAR) often shares spectrum with other systems, such as radio, TV, cellular network, and so on, which are likely to produce radio frequency interference (RFI). Pulse RFI, which hinders SAR signal processing and image interpretation severely, is a common form of RFI and cannot be neglected. The simple and easy-to-implement frequency-domain notch filtering (FNF) method has been widely used to mitigate narrowband pulse RFIs. However, a well-known problem with abnormal sidelobe effect, which is caused by missing spectrum gaps due to the notch operation, is aroused when using FNF. In this letter, a novel time-domain notch filtering (TNF) is proposed. In the proposed method, pulse RFI occurrences are detected and notched by a simple log-ratio operator in a pulse by pulse manner. Then, missing-data iterative adaptive approach (MIAA) is performed to recover the notched signal to avoid ghosts. Experimental results via simulated and real L-band airborne SAR raw data validate the performance of the proposed method.

Soil moisture is an important parameter affecting environmental processes such as hydrology, ecology, and climate. Synthetic aperture radar (SAR) microwave remote sensing is an important means of farmland surface soil moisture (SSM) measurement. The inversion of farmland SSM by microwave remote sensing is greatly affected by vegetation cover. To address this problem, a multisource remote sensing inversion method of farmland SSM based on feature optimization and machine learning is proposed in this paper. Six typical machine learning algorithms suitable for small sample training, including random forest, radial basis function neural network, generalized regression neural network, support vector regression, genetic algorithm–back propagation neural network, and extreme learning machine, were selected in this paper. The features extracted from Sentinel-1/2 and Radarsat-2 remote sensing data were analyzed by Pearson correlation, and those with high correlation coefficients were selected to form the optimal feature subset as the input for the subsequent machine learning models. Then, the SSM collaborative inversion models under different machine learning algorithms were constructed, and comparative experiments were set up to select the optimal prediction model. The models’ accuracy under different feature parameters were studied, and the difference in the performance between the dual-polarization SAR data and the quad-polarization SAR data in SSM inversion was explored. The experimental results showed that among the six models, the random forest model had a higher inversion accuracy, with a coefficient of determination of 0.6395 and a root mean square error of 0.0264 cm³/cm³. Meanwhile, the inversion accuracy could be greatly improved after feature optimization, and the inversion accuracy of the quad-polarization SAR data combined with optical remote sensing data, was better than that of the dual-polarization SAR data combined with optical remote sensing data.

Although optical remote sensing can intuitively detect algal bloom, it is limited by the weather conditions. Synthetic aperture radar (SAR) is not affected by inadequate weather conditions. According to visual interpretation of SAR images and comparisons of quasi-synchronized optical images, the gathering areas of algal bloom present as “dark regions” on SAR images. It is shown that using SAR to monitor the water surface is workable. However, dark regions may also be caused by other factors, such as low wind speeds. This challenges with SAR monitoring of algal bloom on the water surface. In this study, an improved K-means algorithm, combined with multi-Otsu thresholding algorithm, was proposed to segment the dark regions. After feature analysis and extraction of Sentinel-1A images, an algal bloom recognition model with a support vector machine (SVM) was applied to discriminate the algal bloom dark regions from the low wind dark regions. According the experimental results, the overall accuracy achieved 74.00% in Taihu Lake. Additionally, this method was also validated in Chaohu Lake and Danjiangkou Reservoir. Therefore, it can be concluded that SAR can provide a new technical means for monitoring algal bloom of inland lakes, particularly when it is cloudy and unsuitable for optical remote sensing. To obtain more information about algal bloom, multi-band and multi-polarization SAR images can be considered for future.

Crop type identification is the initial stage and an important part of the agricultural monitoring system. It is well known that synthetic aperture radar (SAR) Sentinel-1A imagery provides a reliable data source for crop type identification. However, a single-temporal SAR image does not contain enough features, and the unique physical characteristics of radar images are relatively lacking, which limits its potential in crop mapping. In addition, current methods may not be applicable for time-series SAR data. To address the above issues, a new crop type identification method was proposed. Specifically, a farmland mask was firstly generated by the object Markov random field (OMRF) model to remove the interference of non-farmland factors. Then, the features of the standard backscatter coefficient, Sigma-naught (σ₀), and the normalized backscatter coefficient by the incident angle, Gamma-naught (γ₀), were extracted for each type of crop, and the optimal feature combination was found from time-series SAR images by means of Jeffries-Matusita (J-M) distance analysis. Finally, to make efficient utilization of optimal multi-temporal feature combination, a new network, the convolutional-autoencoder neural network (C-AENN), was developed for the crop type identification task. In order to prove the effectiveness of the method, several classical machine learning methods such as support vector machine (SVM), random forest (RF), etc., and deep learning methods such as one dimensional convolutional neural network (1D-CNN) and stacked auto-encoder (SAE), etc., were used for comparison. In terms of quantitative assessment, the proposed method achieved the highest accuracy, with a macro-F1 score of 0.9825, an overall accuracy (OA) score of 0.9794, and a Kappa coefficient (Kappa) score of 0.9705. In terms of qualitative assessment, four typical regions were chosen for intuitive comparison with the sample maps, and the identification result covering the study area was compared with a contemporaneous optical image, which indicated the high accuracy of the proposed method. In short, this study enables the effective identification of crop types, which demonstrates the importance of multi-temporal radar images in feature combination and the necessity of deep learning networks to extract complex features.

Soil moisture is a crucial factor in the field of meteorology, hydrology, and agricultural sciences. In agricultural production, surface soil moisture (SSM) is crucial for crop yield estimation and drought monitoring. For SSM inversion, a synthetic aperture radar (SAR) offers a trustworthy data source. However, for agricultural fields, the use of SAR data alone to invert SSM is susceptible to the influence of vegetation cover. In this paper, based on Sentinel-1 microwave remote sensing data and Sentinel-2 optical remote sensing data, a convolution neural network optimized by sparrow search algorithm (SSA-CNN) was suggested to invert farmland SSM. The feature parameters were first extracted from pre-processed remote sensing data. Then, the correlation analysis between the extracted feature parameters and field measured SSM data was carried out, and the optimal combination of feature parameters for SSM inversion was selected as the input data of the subsequent models. To enhance the performance of the CNN, the hyper-parameters of CNN were optimized using SSA, and the SSA-CNN model was built for SSM inversion based on the obtained optimal hyper-parameter combination. Three typical machine learning approaches, including generalized regression neural network, random forest, and CNN, were used for comparison to show the efficacy of the suggested method. With an average coefficient of determination of 0.80, an average root mean square error of 2.17 vol.%, and an average mean absolute error of 1.68 vol.%, the findings demonstrated that the SSA-CNN model with the optimal feature combination had a better accuracy among the 4 models. In the end, the SSM of the study region was inverted throughout four phenological periods using the SSA-CNN model. The inversion results indicated that the suggested method performed well in local situations.